Re: Login broken with old userspace (was Re: [PATCH v2] selinux: introduce an initial SID for early boot processes)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 28, 2023 at 1:52 PM Stephen Smalley
<stephen.smalley.work@xxxxxxxxx> wrote:
>
> On Fri, Jul 28, 2023 at 7:36 AM Ondrej Mosnacek <omosnace@xxxxxxxxxx> wrote:
> >
> > On Fri, Jul 28, 2023 at 4:12 AM Michael Ellerman <mpe@xxxxxxxxxxxxxx> wrote:
> > >
> > > Ondrej Mosnacek <omosnace@xxxxxxxxxx> writes:
> > > > Currently, SELinux doesn't allow distinguishing between kernel threads
> > > > and userspace processes that are started before the policy is first
> > > > loaded - both get the label corresponding to the kernel SID. The only
> > > > way a process that persists from early boot can get a meaningful label
> > > > is by doing a voluntary dyntransition or re-executing itself.
> > >
> > > Hi,
> > >
> > > This commit breaks login for me when booting linux-next kernels with old
> > > userspace, specifically Ubuntu 16.04 on ppc64le. 18.04 is OK.
> > >
> > > The symptom is that login never accepts the root password, it just
> > > always says "Login incorrect".
> > >
> > > Bisect points to this commit.
> > >
> > > Reverting this commit on top of next-20230726, fixes the problem
> > > (ie. login works again).
> > >
> > > Booting with selinux=0 also fixes the problem.
> > >
> > > Is this expected? The change log below suggests backward compatibility
> > > was considered, is 16.04 just too old?
> >
> > Hi Michael,
> >
> > I can reproduce it on Fedora 38 when I boot with SELINUX=disabled in
> > /etc/selinux/config (+ a kernel including that commit), so it likely
> > isn't caused by the userspace being old. Can you check what you have
> > in /etc/selinux/config (or if it exists at all)?
> >
> > We have deprecated and removed the "runtime disable" functionality in
> > SELinux recently [1], which was used to implement "disabling" SELinux
> > via the /etc/selinux/config file, so now the situation (selinux=0 +
> > SELINUX=disabled in /etc/selinux/config) leads to a state where
> > SELinux is enabled, but no policy is loaded (and no enforcement is
> > done). Such a state mostly behaves as if SElinux was truly disabled
> > (via kernel command line), but there are some subtle differences and I
> > believe we don't officially support it (Paul might clarify). With
> > latest kernels it is recommended to either disable SELinux via the
> > kernel command line (or Kconfig[2]) or to boot it in Enforcing or
> > Permissive mode with a valid/usable policy installed.
> >
> > So I wonder if Ubuntu ships by default with the bad configuration or
> > if it's just a result of using the custom-built linux-next kernel (or
> > some changes on your part). If Ubuntu's stock kernel is configured to
> > boot with SELinux enabled by default, they should also by default ship
> > a usable policy and SELINUX=permissive/enforcing in
> > /etc/selinux/config (or configure the kernel[2] or bootloader to boot
> > with SELinux disabled by default). (Although if they ship a pre-[1]
> > kernel, they may continue to rely on the runtime disable
> > functionality, but it means people will have to be careful when
> > booting newer or custom kernels.)
> >
> > That said, I'd like to get to the bottom of why the commit causes the
> > login to fail and fix it somehow. I presume something in PAM chokes on
> > the fact that userspace tasks now have "init" instead of "kernel" as
> > the pre-policy-load security context, but so far I haven't been able
> > to pinpoint the problem. I'll keep digging...
> >
> > [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f22f9aaf6c3d92ebd5ad9e67acc03afebaaeb289
> > [2] via CONFIG_LSM (or CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE on older kernels)
>
> Prior to selinux userspace commit
> 685f4aeeadc0b60f3770404d4f149610d656e3c8 ("libselinux:
> is_selinux_enabled(): drop no-policy-loaded test.") libselinux was
> checking the result of reading /proc/self/attr/current to see if it
> returned the "kernel" string as a means of detecting a system with
> SELinux enabled but no policy loaded, and treated that as if SELinux
> were disabled. Hence, this does break old userspace. Not sure though
> why you'd see the same behavior with modern libselinux.

Hm... now I tried booting the stock Fedora kernel (without the early
boot initial SID commit) and I got the same failure to login as with
the new kernel. So if Ubuntu 16.04 ships with pre-685f4aeeadc0
libselinux (quite possible), then it seems that the scenario with
terminal login + SELinux enabled + policy not loaded only works with
pre-685f4aeeadc0 libselinux and pre-5b0eea835d4e kernel, the other
combinations are broken. With pre-685f4aeeadc0 libselinux +
post-5b0eea835d4e kernel it is expected as you say (and probably
inevitable barring some hack on the kernel side), but it's not clear
why also only updating libselinux seems to break it... /sys/fs/selinux
is not mounted in my scenario, so there must be something else coming
into play.


--
Ondrej Mosnacek
Senior Software Engineer, Linux Security - SELinux kernel
Red Hat, Inc.





[Index of Archives]     [Selinux Refpolicy]     [Linux SGX]     [Fedora Users]     [Fedora Desktop]     [Yosemite Photos]     [Yosemite Camping]     [Yosemite Campsites]     [KDE Users]     [Gnome Users]

  Powered by Linux