James Carter <jwcart2@xxxxxxxxx> writes: > On Fri, Apr 1, 2022 at 11:45 AM Petr Lautrbach <plautrba@xxxxxxxxxx> wrote: >> >> When policycoreutils was split into policycoreutils/ python/ gui/ and sandbox/ >> sub-directories, po/ translation files stayed in policycoreutils/. >> >> This commit splits original policycoreutils translations to >> policycoreutils, selinux-python, selinux-gui, and selinux-sandbox. >> >> See original Fedora issue https://github.com/fedora-selinux/selinux/issues/43 >> >> Signed-off-by: Petr Lautrbach <plautrba@xxxxxxxxxx> > > There is an extra space at the end of one of the lines as indicated > below, but that can be fixed when merged. > > Acked-by: James Carter <jwcart2@xxxxxxxxx> > Merged with fixed extra space, thanks! >> --- >> gui/Makefile | 4 + >> gui/booleansPage.py | 2 +- >> gui/domainsPage.py | 2 +- >> gui/fcontextPage.py | 2 +- >> gui/loginsPage.py | 2 +- >> gui/modulesPage.py | 2 +- >> gui/po/Makefile | 84 +++++++++++++++++++ >> gui/po/POTFILES | 17 ++++ >> gui/polgengui.py | 2 +- >> gui/portsPage.py | 2 +- >> gui/semanagePage.py | 2 +- >> gui/statusPage.py | 2 +- >> gui/system-config-selinux.py | 2 +- >> gui/usersPage.py | 2 +- >> policycoreutils/po/Makefile | 72 ++--------------- >> policycoreutils/po/POTFILES | 9 +++ >> python/Makefile | 2 +- >> python/chcat/chcat | 2 +- >> python/po/Makefile | 85 ++++++++++++++++++++ >> python/po/POTFILES | 10 +++ >> python/semanage/semanage | 2 +- >> python/semanage/seobject.py | 2 +- >> python/sepolgen/src/sepolgen/sepolgeni18n.py | 2 +- >> python/sepolicy/sepolicy.py | 2 +- >> python/sepolicy/sepolicy/__init__.py | 2 +- >> python/sepolicy/sepolicy/generate.py | 2 +- >> python/sepolicy/sepolicy/gui.py | 2 +- >> python/sepolicy/sepolicy/interface.py | 2 +- >> sandbox/Makefile | 3 + >> sandbox/po/Makefile | 84 +++++++++++++++++++ >> sandbox/po/POTFILES | 1 + >> sandbox/sandbox | 2 +- >> 32 files changed, 324 insertions(+), 89 deletions(-) >> create mode 100644 gui/po/Makefile >> create mode 100644 gui/po/POTFILES >> create mode 100644 policycoreutils/po/POTFILES >> create mode 100644 python/po/Makefile >> create mode 100644 python/po/POTFILES >> create mode 100644 sandbox/po/Makefile >> create mode 100644 sandbox/po/POTFILES >> >> diff --git a/gui/Makefile b/gui/Makefile >> index ca965c942912..4035fb21b8c9 100644 >> --- a/gui/Makefile >> +++ b/gui/Makefile >> @@ -22,6 +22,7 @@ system-config-selinux.ui \ >> usersPage.py >> >> all: $(TARGETS) system-config-selinux.py polgengui.py >> + (cd po && $(MAKE) $@) >> >> install: all >> -mkdir -p $(DESTDIR)$(MANDIR)/man8 >> @@ -54,7 +55,10 @@ install: all >> install -m 644 sepolicy_$${i}.png $(DESTDIR)$(DATADIR)/icons/hicolor/$${i}x$${i}/apps/sepolicy.png; \ >> done >> install -m 644 org.selinux.config.policy $(DESTDIR)$(DATADIR)/polkit-1/actions/ >> + (cd po && $(MAKE) $@) >> + >> clean: >> + (cd po && $(MAKE) $@) >> >> indent: >> >> diff --git a/gui/booleansPage.py b/gui/booleansPage.py >> index 7849bea26a06..dd12b6d6ab86 100644 >> --- a/gui/booleansPage.py >> +++ b/gui/booleansPage.py >> @@ -38,7 +38,7 @@ DISABLED = 2 >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/domainsPage.py b/gui/domainsPage.py >> index bad5140d8c59..6bbe4de5884f 100644 >> --- a/gui/domainsPage.py >> +++ b/gui/domainsPage.py >> @@ -30,7 +30,7 @@ from semanagePage import * >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/fcontextPage.py b/gui/fcontextPage.py >> index d26aa1b405a9..52292cae01d2 100644 >> --- a/gui/fcontextPage.py >> +++ b/gui/fcontextPage.py >> @@ -47,7 +47,7 @@ class context: >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/loginsPage.py b/gui/loginsPage.py >> index b67eb8bc42af..cbfb0cc23f65 100644 >> --- a/gui/loginsPage.py >> +++ b/gui/loginsPage.py >> @@ -29,7 +29,7 @@ from semanagePage import * >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/modulesPage.py b/gui/modulesPage.py >> index 0584acf9b3a4..35a0129bab9c 100644 >> --- a/gui/modulesPage.py >> +++ b/gui/modulesPage.py >> @@ -30,7 +30,7 @@ from semanagePage import * >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/po/Makefile b/gui/po/Makefile >> new file mode 100644 >> index 000000000000..7ccd48eb2422 >> --- /dev/null >> +++ b/gui/po/Makefile >> @@ -0,0 +1,84 @@ >> +# >> +# Makefile for the PO files (translation) catalog >> +# >> + >> +PREFIX ?= /usr >> + >> +# What is this package? >> +NLSPACKAGE = gui >> +POTFILE = $(NLSPACKAGE).pot >> +INSTALL = /usr/bin/install -c -p >> +INSTALL_DATA = $(INSTALL) -m 644 >> +INSTALL_DIR = /usr/bin/install -d >> + >> +# destination directory >> +INSTALL_NLS_DIR = $(PREFIX)/share/locale >> + >> +# PO catalog handling >> +MSGMERGE = msgmerge >> +MSGMERGE_FLAGS = -q >> +XGETTEXT = xgettext --default-domain=$(NLSPACKAGE) >> +MSGFMT = msgfmt >> + >> +# All possible linguas >> +PO_LINGUAS := $(sort $(patsubst %.po,%,$(wildcard *.po))) >> + >> +# Only the files matching what the user has set in LINGUAS >> +USER_LINGUAS := $(filter $(patsubst %,%%,$(LINGUAS)),$(PO_LINGUAS)) >> + >> +# if no valid LINGUAS, build all languages >> +USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS)) >> + >> +POFILES = $(patsubst %,%.po,$(USE_LINGUAS)) >> +MOFILES = $(patsubst %.po,%.mo,$(POFILES)) >> +POTFILES = $(shell cat POTFILES) >> + >> +#default:: clean >> + >> +all:: $(MOFILES) >> + >> +$(POTFILE): $(POTFILES) >> + $(XGETTEXT) --keyword=_ --keyword=N_ $(POTFILES) >> + @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \ >> + rm -f $(NLSPACKAGE).po; \ >> + else \ >> + mv -f $(NLSPACKAGE).po $(POTFILE); \ >> + fi; \ >> + >> + >> +refresh-po: Makefile >> + for cat in $(POFILES); do \ >> + lang=`basename $$cat .po`; \ >> + if $(MSGMERGE) $(MSGMERGE_FLAGS) $$lang.po $(POTFILE) > $$lang.pot ; then \ >> + mv -f $$lang.pot $$lang.po ; \ >> + echo "$(MSGMERGE) of $$lang succeeded" ; \ >> + else \ >> + echo "$(MSGMERGE) of $$lang failed" ; \ >> + rm -f $$lang.pot ; \ >> + fi \ >> + done >> + >> +clean: >> + @rm -fv *mo *~ .depend >> + @rm -rf tmp >> + >> +install: $(MOFILES) >> + @for n in $(MOFILES); do \ >> + l=`basename $$n .mo`; \ >> + $(INSTALL_DIR) $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES; \ >> + $(INSTALL_DATA) --verbose $$n $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES/selinux-$(NLSPACKAGE).mo; \ >> + done >> + >> +%.mo: %.po >> + $(MSGFMT) -o $@ $< >> +report: >> + @for cat in $(wildcard *.po); do \ >> + echo -n "$$cat: "; \ >> + msgfmt -v --statistics -o /dev/null $$cat; \ >> + done >> + >> +.PHONY: missing depend >> + >> +relabel: >> + >> +test: >> diff --git a/gui/po/POTFILES b/gui/po/POTFILES >> new file mode 100644 >> index 000000000000..1795c5c1951b >> --- /dev/null >> +++ b/gui/po/POTFILES >> @@ -0,0 +1,17 @@ >> +../booleansPage.py >> +../domainsPage.py >> +../fcontextPage.py >> +../loginsPage.py >> +../modulesPage.py >> +../org.selinux.config.policy >> +../polgengui.py >> +../polgen.ui >> +../portsPage.py >> +../selinux-polgengui.desktop >> +../semanagePage.py >> +../sepolicy.desktop >> +../statusPage.py >> +../system-config-selinux.desktop >> +../system-config-selinux.py >> +../system-config-selinux.ui >> +../usersPage.py >> diff --git a/gui/polgengui.py b/gui/polgengui.py >> index d284ded65279..01f541bafae8 100644 >> --- a/gui/polgengui.py >> +++ b/gui/polgengui.py >> @@ -63,7 +63,7 @@ def get_all_modules(): >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/portsPage.py b/gui/portsPage.py >> index 30f58383bc1d..a537ecc8c0a1 100644 >> --- a/gui/portsPage.py >> +++ b/gui/portsPage.py >> @@ -35,7 +35,7 @@ from semanagePage import * >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/semanagePage.py b/gui/semanagePage.py >> index 4127804fbbee..5361d69c1313 100644 >> --- a/gui/semanagePage.py >> +++ b/gui/semanagePage.py >> @@ -22,7 +22,7 @@ from gi.repository import Gdk, Gtk >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/statusPage.py b/gui/statusPage.py >> index 766854b19cba..a8f079b9b163 100644 >> --- a/gui/statusPage.py >> +++ b/gui/statusPage.py >> @@ -35,7 +35,7 @@ RELABELFILE = "/.autorelabel" >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/system-config-selinux.py b/gui/system-config-selinux.py >> index 3f70122b87e8..8c46c987b974 100644 >> --- a/gui/system-config-selinux.py >> +++ b/gui/system-config-selinux.py >> @@ -45,7 +45,7 @@ import selinux >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/gui/usersPage.py b/gui/usersPage.py >> index 26794ed5c3f3..d15d4c5a71dd 100644 >> --- a/gui/usersPage.py >> +++ b/gui/usersPage.py >> @@ -29,7 +29,7 @@ from semanagePage import * >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-gui" >> try: >> import gettext >> kwargs = {} >> diff --git a/policycoreutils/po/Makefile b/policycoreutils/po/Makefile >> index 575e143122e6..5ff92bff6fdc 100644 >> --- a/policycoreutils/po/Makefile >> +++ b/policycoreutils/po/Makefile >> @@ -3,7 +3,6 @@ >> # >> >> PREFIX ?= /usr >> -TOP = ../.. >> >> # What is this package? >> NLSPACKAGE = policycoreutils >> @@ -32,74 +31,13 @@ USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS)) >> >> POFILES = $(patsubst %,%.po,$(USE_LINGUAS)) >> MOFILES = $(patsubst %.po,%.mo,$(POFILES)) >> -POTFILES = \ >> - ../run_init/open_init_pty.c \ >> - ../run_init/run_init.c \ >> - ../semodule_link/semodule_link.c \ >> - ../audit2allow/audit2allow \ >> - ../semanage/seobject.py \ >> - ../setsebool/setsebool.c \ >> - ../newrole/newrole.c \ >> - ../load_policy/load_policy.c \ >> - ../sestatus/sestatus.c \ >> - ../semodule/semodule.c \ >> - ../setfiles/setfiles.c \ >> - ../semodule_package/semodule_package.c \ >> - ../semodule_deps/semodule_deps.c \ >> - ../semodule_expand/semodule_expand.c \ >> - ../scripts/chcat \ >> - ../scripts/fixfiles \ >> - ../restorecond/stringslist.c \ >> - ../restorecond/restorecond.h \ >> - ../restorecond/utmpwatcher.h \ >> - ../restorecond/stringslist.h \ >> - ../restorecond/restorecond.c \ >> - ../restorecond/utmpwatcher.c \ >> - ../gui/booleansPage.py \ >> - ../gui/fcontextPage.py \ >> - ../gui/loginsPage.py \ >> - ../gui/mappingsPage.py \ >> - ../gui/modulesPage.py \ >> - ../gui/polgen.glade \ >> - ../gui/polgengui.py \ >> - ../gui/portsPage.py \ >> - ../gui/semanagePage.py \ >> - ../gui/statusPage.py \ >> - ../gui/system-config-selinux.glade \ >> - ../gui/system-config-selinux.py \ >> - ../gui/usersPage.py \ >> - ../secon/secon.c \ >> - booleans.py \ >> - ../sepolicy/sepolicy.py \ >> - ../sepolicy/sepolicy/communicate.py \ >> - ../sepolicy/sepolicy/__init__.py \ >> - ../sepolicy/sepolicy/network.py \ >> - ../sepolicy/sepolicy/generate.py \ >> - ../sepolicy/sepolicy/sepolicy.glade \ >> - ../sepolicy/sepolicy/gui.py \ >> - ../sepolicy/sepolicy/manpage.py \ >> - ../sepolicy/sepolicy/transition.py \ >> - ../sepolicy/sepolicy/templates/executable.py \ >> - ../sepolicy/sepolicy/templates/__init__.py \ >> - ../sepolicy/sepolicy/templates/network.py \ >> - ../sepolicy/sepolicy/templates/rw.py \ >> - ../sepolicy/sepolicy/templates/script.py \ >> - ../sepolicy/sepolicy/templates/semodule.py \ >> - ../sepolicy/sepolicy/templates/tmp.py \ >> - ../sepolicy/sepolicy/templates/user.py \ >> - ../sepolicy/sepolicy/templates/var_lib.py \ >> - ../sepolicy/sepolicy/templates/var_log.py \ >> - ../sepolicy/sepolicy/templates/var_run.py \ >> - ../sepolicy/sepolicy/templates/var_spool.py >> +POTFILES = $(shell cat POTFILES) >> >> #default:: clean >> >> -all:: $(MOFILES) >> +all:: $(POTFILE) $(MOFILES) >> >> -booleans.py: >> - sepolicy booleans -a > booleans.py >> - >> -$(POTFILE): $(POTFILES) booleans.py >> +$(POTFILE): $(POTFILES) >> $(XGETTEXT) --keyword=_ --keyword=N_ $(POTFILES) >> @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \ >> rm -f $(NLSPACKAGE).po; \ >> @@ -107,8 +45,6 @@ $(POTFILE): $(POTFILES) booleans.py >> mv -f $(NLSPACKAGE).po $(POTFILE); \ >> fi; \ >> >> -update-po: Makefile $(POTFILE) refresh-po >> - @rm -f booleans.py >> >> refresh-po: Makefile >> for cat in $(POFILES); do \ >> @@ -144,3 +80,5 @@ report: >> .PHONY: missing depend >> >> relabel: >> + >> +test: >> diff --git a/policycoreutils/po/POTFILES b/policycoreutils/po/POTFILES >> new file mode 100644 >> index 000000000000..12237dc61ee4 >> --- /dev/null >> +++ b/policycoreutils/po/POTFILES >> @@ -0,0 +1,9 @@ >> +../run_init/open_init_pty.c >> +../run_init/run_init.c >> +../setsebool/setsebool.c >> +../newrole/newrole.c >> +../load_policy/load_policy.c >> +../sestatus/sestatus.c >> +../semodule/semodule.c >> +../setfiles/setfiles.c >> +../secon/secon.c >> diff --git a/python/Makefile b/python/Makefile >> index 9b66d52fbd4d..00312dbdb5c6 100644 >> --- a/python/Makefile >> +++ b/python/Makefile >> @@ -1,4 +1,4 @@ >> -SUBDIRS = sepolicy audit2allow semanage sepolgen chcat >> +SUBDIRS = sepolicy audit2allow semanage sepolgen chcat po >> >> all install relabel clean indent test: >> @for subdir in $(SUBDIRS); do \ >> diff --git a/python/chcat/chcat b/python/chcat/chcat >> index fdd2e46ee3f9..839ddd3b54b6 100755 >> --- a/python/chcat/chcat >> +++ b/python/chcat/chcat >> @@ -30,7 +30,7 @@ import getopt >> import selinux >> import seobject >> >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/python/po/Makefile b/python/po/Makefile >> new file mode 100644 >> index 000000000000..05e49f0cc274 >> --- /dev/null >> +++ b/python/po/Makefile >> @@ -0,0 +1,85 @@ >> +# >> +# Makefile for the PO files (translation) catalog >> +# >> + >> +PREFIX ?= /usr >> + >> +# What is this package? >> +NLSPACKAGE = python >> +POTFILE = $(NLSPACKAGE).pot >> +INSTALL = /usr/bin/install -c -p >> +INSTALL_DATA = $(INSTALL) -m 644 >> +INSTALL_DIR = /usr/bin/install -d >> + >> +# destination directory >> +INSTALL_NLS_DIR = $(PREFIX)/share/locale >> + >> +# PO catalog handling >> +MSGMERGE = msgmerge >> +MSGMERGE_FLAGS = -q >> +XGETTEXT = xgettext --default-domain=$(NLSPACKAGE) >> +MSGFMT = msgfmt >> + >> +# All possible linguas >> +PO_LINGUAS := $(sort $(patsubst %.po,%,$(wildcard *.po))) >> + >> +# Only the files matching what the user has set in LINGUAS >> +USER_LINGUAS := $(filter $(patsubst %,%%,$(LINGUAS)),$(PO_LINGUAS)) >> + >> +# if no valid LINGUAS, build all languages >> +USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS)) >> + >> +POFILES = $(patsubst %,%.po,$(USE_LINGUAS)) >> +MOFILES = $(patsubst %.po,%.mo,$(POFILES)) >> +POTFILES = $(shell cat POTFILES) >> + >> +#default:: clean >> + >> +all:: $(MOFILES) >> + >> +$(POTFILE): $(POTFILES) > > Extra space at the end of the line above. > >> + $(XGETTEXT) -L Python --keyword=_ --keyword=N_ $(POTFILES) >> + $(XGETTEXT) -j --keyword=_ --keyword=N_ ../sepolicy/sepolicy/sepolicy.glade >> + @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \ >> + rm -f $(NLSPACKAGE).po; \ >> + else \ >> + mv -f $(NLSPACKAGE).po $(POTFILE); \ >> + fi; \ >> + >> + >> +refresh-po: Makefile >> + for cat in $(POFILES); do \ >> + lang=`basename $$cat .po`; \ >> + if $(MSGMERGE) $(MSGMERGE_FLAGS) $$lang.po $(POTFILE) > $$lang.pot ; then \ >> + mv -f $$lang.pot $$lang.po ; \ >> + echo "$(MSGMERGE) of $$lang succeeded" ; \ >> + else \ >> + echo "$(MSGMERGE) of $$lang failed" ; \ >> + rm -f $$lang.pot ; \ >> + fi \ >> + done >> + >> +clean: >> + @rm -fv *mo *~ .depend >> + @rm -rf tmp >> + >> +install: $(MOFILES) >> + @for n in $(MOFILES); do \ >> + l=`basename $$n .mo`; \ >> + $(INSTALL_DIR) $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES; \ >> + $(INSTALL_DATA) --verbose $$n $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES/selinux-$(NLSPACKAGE).mo; \ >> + done >> + >> +%.mo: %.po >> + $(MSGFMT) -o $@ $< >> +report: >> + @for cat in $(wildcard *.po); do \ >> + echo -n "$$cat: "; \ >> + msgfmt -v --statistics -o /dev/null $$cat; \ >> + done >> + >> +.PHONY: missing depend >> + >> +relabel: >> + >> +test: >> diff --git a/python/po/POTFILES b/python/po/POTFILES >> new file mode 100644 >> index 000000000000..128eb870a69e >> --- /dev/null >> +++ b/python/po/POTFILES >> @@ -0,0 +1,10 @@ >> +../audit2allow/audit2allow >> +../chcat/chcat >> +../semanage/semanage >> +../semanage/seobject.py >> +../sepolgen/src/sepolgen/interfaces.py >> +../sepolicy/sepolicy/generate.py >> +../sepolicy/sepolicy/gui.py >> +../sepolicy/sepolicy/__init__.py >> +../sepolicy/sepolicy/interface.py >> +../sepolicy/sepolicy.py >> diff --git a/python/semanage/semanage b/python/semanage/semanage >> index ff9fb66b1411..12bb159ef649 100644 >> --- a/python/semanage/semanage >> +++ b/python/semanage/semanage >> @@ -30,7 +30,7 @@ import seobject >> import sys >> import traceback >> >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/python/semanage/seobject.py b/python/semanage/seobject.py >> index 21adbf6eb74f..69e60db80060 100644 >> --- a/python/semanage/seobject.py >> +++ b/python/semanage/seobject.py >> @@ -29,7 +29,7 @@ import sys >> import stat >> import socket >> from semanage import * >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> import sepolicy >> from setools.policyrep import SELinuxPolicy >> from setools.typequery import TypeQuery >> diff --git a/python/sepolgen/src/sepolgen/sepolgeni18n.py b/python/sepolgen/src/sepolgen/sepolgeni18n.py >> index 998c4356415c..56ebd807c69c 100644 >> --- a/python/sepolgen/src/sepolgen/sepolgeni18n.py >> +++ b/python/sepolgen/src/sepolgen/sepolgeni18n.py >> @@ -19,7 +19,7 @@ >> >> try: >> import gettext >> - t = gettext.translation( 'yumex' ) >> + t = gettext.translation( 'selinux-python' ) >> _ = t.gettext >> except: >> def _(str): >> diff --git a/python/sepolicy/sepolicy.py b/python/sepolicy/sepolicy.py >> index 7b2230651099..32956e58f52e 100755 >> --- a/python/sepolicy/sepolicy.py >> +++ b/python/sepolicy/sepolicy.py >> @@ -28,7 +28,7 @@ import sepolicy >> from multiprocessing import Pool >> from sepolicy import get_os_version, get_conditionals, get_conditionals_format_text >> import argparse >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/python/sepolicy/sepolicy/__init__.py b/python/sepolicy/sepolicy/__init__.py >> index e8654abbceb3..203ca25f4210 100644 >> --- a/python/sepolicy/sepolicy/__init__.py >> +++ b/python/sepolicy/sepolicy/__init__.py >> @@ -23,7 +23,7 @@ from setools.typeattrquery import TypeAttributeQuery >> from setools.typequery import TypeQuery >> from setools.userquery import UserQuery >> >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/python/sepolicy/sepolicy/generate.py b/python/sepolicy/sepolicy/generate.py >> index 4e1ed4e9dc31..43180ca6fda4 100644 >> --- a/python/sepolicy/sepolicy/generate.py >> +++ b/python/sepolicy/sepolicy/generate.py >> @@ -48,7 +48,7 @@ import sepolgen.defaults as defaults >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/python/sepolicy/sepolicy/gui.py b/python/sepolicy/sepolicy/gui.py >> index 1e86422b864a..c9ca158ddd09 100644 >> --- a/python/sepolicy/sepolicy/gui.py >> +++ b/python/sepolicy/sepolicy/gui.py >> @@ -41,7 +41,7 @@ import os >> import re >> import unicodedata >> >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/python/sepolicy/sepolicy/interface.py b/python/sepolicy/sepolicy/interface.py >> index bdffb770f364..9d40aea1498d 100644 >> --- a/python/sepolicy/sepolicy/interface.py >> +++ b/python/sepolicy/sepolicy/interface.py >> @@ -30,7 +30,7 @@ __all__ = ['get_all_interfaces', 'get_interfaces_from_xml', 'get_admin', 'get_us >> ## >> ## I18N >> ## >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-python" >> try: >> import gettext >> kwargs = {} >> diff --git a/sandbox/Makefile b/sandbox/Makefile >> index 9da5e58db9e6..84cb5a39bf7e 100644 >> --- a/sandbox/Makefile >> +++ b/sandbox/Makefile >> @@ -13,6 +13,7 @@ override LDLIBS += -lselinux -lcap-ng >> SEUNSHARE_OBJS = seunshare.o >> >> all: sandbox seunshare sandboxX.sh start >> + (cd po && $(MAKE) $@) >> >> seunshare: $(SEUNSHARE_OBJS) >> >> @@ -39,12 +40,14 @@ install: all >> install -m 755 start $(DESTDIR)$(SHAREDIR) >> -mkdir -p $(DESTDIR)$(SYSCONFDIR) >> install -m 644 sandbox.conf $(DESTDIR)$(SYSCONFDIR)/sandbox >> + (cd po && $(MAKE) $@) >> >> test: >> @$(PYTHON) test_sandbox.py -v >> >> clean: >> -rm -f seunshare *.o *~ >> + (cd po && $(MAKE) $@) >> >> indent: >> ../../scripts/Lindent $(wildcard *.[ch]) >> diff --git a/sandbox/po/Makefile b/sandbox/po/Makefile >> new file mode 100644 >> index 000000000000..e75343649b67 >> --- /dev/null >> +++ b/sandbox/po/Makefile >> @@ -0,0 +1,84 @@ >> +# >> +# Makefile for the PO files (translation) catalog >> +# >> + >> +PREFIX ?= /usr >> + >> +# What is this package? >> +NLSPACKAGE = sandbox >> +POTFILE = $(NLSPACKAGE).pot >> +INSTALL = /usr/bin/install -c -p >> +INSTALL_DATA = $(INSTALL) -m 644 >> +INSTALL_DIR = /usr/bin/install -d >> + >> +# destination directory >> +INSTALL_NLS_DIR = $(PREFIX)/share/locale >> + >> +# PO catalog handling >> +MSGMERGE = msgmerge >> +MSGMERGE_FLAGS = -q >> +XGETTEXT = xgettext -L Python --default-domain=$(NLSPACKAGE) >> +MSGFMT = msgfmt >> + >> +# All possible linguas >> +PO_LINGUAS := $(sort $(patsubst %.po,%,$(wildcard *.po))) >> + >> +# Only the files matching what the user has set in LINGUAS >> +USER_LINGUAS := $(filter $(patsubst %,%%,$(LINGUAS)),$(PO_LINGUAS)) >> + >> +# if no valid LINGUAS, build all languages >> +USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS)) >> + >> +POFILES = $(patsubst %,%.po,$(USE_LINGUAS)) >> +MOFILES = $(patsubst %.po,%.mo,$(POFILES)) >> +POTFILES = $(shell cat POTFILES) >> + >> +#default:: clean >> + >> +all:: $(POTFILE) $(MOFILES) >> + >> +$(POTFILE): $(POTFILES) >> + $(XGETTEXT) --keyword=_ --keyword=N_ $(POTFILES) >> + @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \ >> + rm -f $(NLSPACKAGE).po; \ >> + else \ >> + mv -f $(NLSPACKAGE).po $(POTFILE); \ >> + fi; \ >> + >> + >> +refresh-po: Makefile >> + for cat in $(POFILES); do \ >> + lang=`basename $$cat .po`; \ >> + if $(MSGMERGE) $(MSGMERGE_FLAGS) $$lang.po $(POTFILE) > $$lang.pot ; then \ >> + mv -f $$lang.pot $$lang.po ; \ >> + echo "$(MSGMERGE) of $$lang succeeded" ; \ >> + else \ >> + echo "$(MSGMERGE) of $$lang failed" ; \ >> + rm -f $$lang.pot ; \ >> + fi \ >> + done >> + >> +clean: >> + @rm -fv *mo *~ .depend >> + @rm -rf tmp >> + >> +install: $(MOFILES) >> + @for n in $(MOFILES); do \ >> + l=`basename $$n .mo`; \ >> + $(INSTALL_DIR) $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES; \ >> + $(INSTALL_DATA) --verbose $$n $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES/selinux-$(NLSPACKAGE).mo; \ >> + done >> + >> +%.mo: %.po >> + $(MSGFMT) -o $@ $< >> +report: >> + @for cat in $(wildcard *.po); do \ >> + echo -n "$$cat: "; \ >> + msgfmt -v --statistics -o /dev/null $$cat; \ >> + done >> + >> +.PHONY: missing depend >> + >> +relabel: >> + >> +test: >> diff --git a/sandbox/po/POTFILES b/sandbox/po/POTFILES >> new file mode 100644 >> index 000000000000..deff3f2f4656 >> --- /dev/null >> +++ b/sandbox/po/POTFILES >> @@ -0,0 +1 @@ >> +../sandbox >> diff --git a/sandbox/sandbox b/sandbox/sandbox >> index ca5f1e030a51..16c43b51eaaa 100644 >> --- a/sandbox/sandbox >> +++ b/sandbox/sandbox >> @@ -37,7 +37,7 @@ import sepolicy >> >> SEUNSHARE = "/usr/sbin/seunshare" >> SANDBOXSH = "/usr/share/sandbox/sandboxX.sh" >> -PROGNAME = "policycoreutils" >> +PROGNAME = "selinux-sandbox" >> try: >> import gettext >> kwargs = {} >> -- >> 2.35.1 >>
