On Tue, 2017-05-16 at 14:43 -0400, Stephen Smalley wrote: > On Mon, 2017-05-15 at 23:42 +0300, Dan Jurgens wrote: > > From: Daniel Jurgens <danielj@xxxxxxxxxxxx> > > > > Add support for reading, writing, and copying Infinabinda Pkey > > Infiniband > > > ocontext > > data. Also add support for querying a Pkey sid to checkpolicy. > > > > Signed-off-by: Daniel Jurgens <danielj@xxxxxxxxxxxx> > > > > --- > > v1: > > Stephen Smalley: > > - Removed domain and type params from sepol_ibpkey_sid. > > - Removed splen param from sepol_ibpkey_sid, it never varied. > > - Removed extra XPERMS_IOCTL version from policydb_compat_info. > > - Confirm that low order bytes of IPv6 addr for subnet prefix is > > 0's. > > > > James Carter: > > - Added ibpkey handling to kernel_to_cil.c and kernel_to_conf.c > > > > Signed-off-by: Daniel Jurgens <danielj@xxxxxxxxxxxx> > > --- > > checkpolicy/checkpolicy.c | 25 +++++++++++++ > > libsepol/include/sepol/policydb/services.h | 8 ++++ > > libsepol/src/expand.c | 9 +++++ > > libsepol/src/kernel_to_cil.c | 58 > > +++++++++++++++++++++++++++++ > > libsepol/src/kernel_to_conf.c | 59 > > ++++++++++++++++++++++++++++++ > > libsepol/src/libsepol.map.in | 1 + > > libsepol/src/module_to_cil.c | 38 > > +++++++++++++++++++ > > libsepol/src/policydb.c | 37 > > +++++++++++++++++++ > > libsepol/src/services.c | 51 > > ++++++++++++++++++++++++++ > > libsepol/src/write.c | 16 ++++++++ > > 10 files changed, 302 insertions(+) > > > > diff --git a/libsepol/include/sepol/policydb/services.h > > b/libsepol/include/sepol/policydb/services.h > > index 9162149..459254e 100644 > > --- a/libsepol/include/sepol/policydb/services.h > > +++ b/libsepol/include/sepol/policydb/services.h > > @@ -188,6 +188,14 @@ extern int sepol_port_sid(uint16_t domain, > > uint16_t port, sepol_security_id_t * > > out_sid); > > > > /* > > + * Return the SID of the ibpkey specified by > > + * `subnet prefix', and `pkey'. > > + */ > > +extern int sepol_ibpkey_sid(void *subnet_prefix_p, > > Why void *? Can't this just be struct in6_addr *subnet_prefix or > uint32_t subnet_prefix[]? The only reason we use void *addr in > sepol_node_sid() is because that argument can actually vary depending > on the domain. Likely can be const too. > > > + uint16_t pkey, > > + sepol_security_id_t *out_sid); > > + > > +/* > > * Return the SIDs to use for a network interface > > * with the name `name'. The `if_sid' SID is returned for > > * the interface and the `msg_sid' SID is returned as > > diff --git a/libsepol/src/expand.c b/libsepol/src/expand.c > > index 54bf781..c45ecbe 100644 > > --- a/libsepol/src/expand.c > > +++ b/libsepol/src/expand.c > > @@ -4,6 +4,7 @@ > > * > > * Copyright (C) 2004-2005 Tresys Technology, LLC > > * Copyright (C) 2007 Red Hat, Inc. > > + * Copyright (C) 2017 Mellanox Technologies, Inc. > > * > > * This library is free software; you can redistribute it and/or > > * modify it under the terms of the GNU Lesser General Public > > @@ -2217,6 +2218,14 @@ static int > > ocontext_copy_selinux(expand_state_t *state) > > return -1; > > } > > break; > > + case OCON_IBPKEY: > > + n->u.ibpkey.subnet_prefix[0] = c- > > > u.ibpkey.subnet_prefix[0]; > > > > + n->u.ibpkey.subnet_prefix[1] = c- > > > u.ibpkey.subnet_prefix[1]; > > > > + n->u.ibpkey.subnet_prefix[2] = c- > > > u.ibpkey.subnet_prefix[2]; > > > > + n->u.ibpkey.subnet_prefix[3] = c- > > > u.ibpkey.subnet_prefix[3]; > > [2] and [3] should always be zero. > > > + n->u.ibpkey.low_pkey = c- > > > u.ibpkey.low_pkey; > > > > + n->u.ibpkey.high_pkey = c- > > > u.ibpkey.high_pkey; > > > > + break; > > case OCON_PORT: > > n->u.port.protocol = c- > > > u.port.protocol; > > > > n->u.port.low_port = c- > > > u.port.low_port; > > diff --git a/libsepol/src/policydb.c b/libsepol/src/policydb.c > > index 7093b29..d6e8e6f 100644 > > --- a/libsepol/src/policydb.c > > +++ b/libsepol/src/policydb.c > > > > @@ -2782,6 +2804,21 @@ static int ocontext_read_selinux(struct > > policydb_compat_info *info, > > (&c->context[1], p, fp)) > > return -1; > > break; > > + case OCON_IBPKEY: > > + rc = next_entry(buf, fp, > > sizeof(uint32_t) * 6); > > + if (rc < 0 || buf[2] || buf[3]) > > + return -1; > > Kernel code also rejects buf[4] or buf[5] > 0xffff. > > > + > > + c->u.ibpkey.subnet_prefix[0] = > > buf[0]; > > + c->u.ibpkey.subnet_prefix[1] = > > buf[1]; > > + > > + c->u.ibpkey.low_pkey = > > le32_to_cpu(buf[4]); > > + c->u.ibpkey.high_pkey = > > le32_to_cpu(buf[5]); > > + > > + if (context_read_and_validate > > + (&c->context[0], p, fp)) > > + return -1; > > + break; > > case OCON_PORT: > > rc = next_entry(buf, fp, > > sizeof(uint32_t) * 3); > > if (rc < 0) > > diff --git a/libsepol/src/write.c b/libsepol/src/write.c > > index e75b9ab..fa1b7d1 100644 > > --- a/libsepol/src/write.c > > +++ b/libsepol/src/write.c > > @@ -16,6 +16,7 @@ > > * > > * Copyright (C) 2004-2005 Trusted Computer Solutions, Inc. > > * Copyright (C) 2003-2005 Tresys Technology, LLC > > + * Copyright (C) 2017 Mellanox Technologies Inc. > > * > > * This library is free software; you can redistribute it and/or > > * modify it under the terms of the GNU Lesser General Public > > @@ -1410,6 +1411,21 @@ static int ocontext_write_selinux(struct > > policydb_compat_info *info, > > if (context_write(p, &c- > > >context[1], > > fp)) > > return POLICYDB_ERROR; > > break; > > + case OCON_IBPKEY: > > + /* The subnet prefix is in > > network > > order */ > > + for (j = 0; j < 4; j++) > > + buf[j] = c- > > > u.ibpkey.subnet_prefix[j]; > > Kernel write code always writes [2] and [3] as 0. This btw again raises the question of whether it worth storing them in the binary policy at all. > > > + > > + buf[4] = cpu_to_le32(c- > > > u.ibpkey.low_pkey); > > > > + buf[5] = cpu_to_le32(c- > > > u.ibpkey.high_pkey); > > > > + > > + items = put_entry(buf, > > sizeof(uint32_t), 6, fp); > > + if (items != 6) > > + return POLICYDB_ERROR; > > + > > + if (context_write(p, &c- > > >context[0], > > fp)) > > + return POLICYDB_ERROR; > > + break; > > case OCON_PORT: > > buf[0] = c->u.port.protocol; > > buf[1] = c->u.port.low_port;
