-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
National Cyber Alert System
Technical Cyber Security Alert TA07-103A
Microsoft Windows DNS RPC Buffer Overflow
Original release date: April 13, 2007
Last revised: --
Source: US-CERT
Systems Affected
* Microsoft Windows 2003 Server
* Microsoft Windows 2000 Server
Overview
A buffer overflow in the the Remote Procedure Call (RPC) management
interface used by the Microsoft Windows Domain Name Service (DNS)
service is actively being exploited. This vulnerability may allow a
remote attacker to execute arbitrary code with SYSTEM privileges.
I. Description
The Microsoft Windows DNS service RPC management interface contains
a stack-based buffer overflow. This vulnerability can be triggered
by sending a specially crafted RPC packet to the RPC management
interface. The management interface typically operates on a
dynamically-assigned port between 1024/tcp and 5000/tcp.
Note that this vulnerability cannot be exploited via the DNS name
resolution service (53/udp).
More information on this vulnerability is available in
Vulnerability Note VU#555920 and Microsoft Security Advisory
(935964).
This vulnerability is actively being exploited.
II. Impact
A remote attacker may be able to execute arbitrary code with SYSTEM
privileges or cause a denial-of-service condition.
III. Solution
We are unaware of a complete solution to this vulnerability. Until a
fix is available, there are workarounds that may reduce the chances of
exploitation. It is important to understand your network's
configuration and service requirements before deciding what changes
are appropriate. For instance, disabling the RPC interface of the DNS
service may prevent administrators from being able to remotely manage
a Microsoft Windows DNS server. Consider this when implementing the
following workarounds:
*Disable the RPC interface used by the Microsoft Windows DNS service*
This workaround will configure the DNS management service to to
function only via Local Procedure Call (LPC). This prevents
exploitation of the vulnerability, however it also disables remote
management via RPC, which is used by the Microsoft Management Console
(MMC) DNS snap-in.
According to Microsoft Security Advisory (935964), the RPC remote
management can be disabled by taking the following steps:
1. On the start menu click 'Run' and then type 'Regedit' and then
press enter.
2. Navigate to the following registry location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters.
3. On the 'Edit' menu select 'New' and then click 'DWORD Value'.
4. Where 'New Value #1' is highlighted type 'RpcProtocol' for the
name of the value and then press enter.
5. Double click on the newly created value and change the value's
data to 4.
Alternatively, the following text can be saved as a .REG file and
imported:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNS\Parameters]
"RpcProtocol"=dword:00000004
Restart the DNS service for the change to take effect.
More information on regedit.exe is available in Microsoft Knowledge
Base Article 82821.
*Block or Restrict access to RPC services*
This workaround will restrict TCP/IP access to all RPC interfaces,
including the vulnerable DNS management RPC interface. This workaround
will not prevent exploitation of the vulnerability, but will limit the
possible sources of attacks. This workaround will allow remote
management using the RPC interface (MMC DNS Snap-in) from selected
networks.
Block access to the RPC Endpoint Mapper service (135/tcp) at your
network perimeters. Note that blocking RPC at the network perimeter
would still allow attackers within the perimeter to exploit this
vulnerability.
By default, the RPC Endpoint Mapper service assigns RPC ports between
1024/tcp and 5000/tcp. All unsolicited traffic on these ports should
also be blocked.
IV. References
* Vulnerability Note VU#555920 -
<http://www.kb.cert.org/vuls/id/555920>
* Microsoft Security Advisory (935964) -
<http://www.microsoft.com/technet/security/advisory/935964.mspx>
* Registration Info Editor (REGEDIT) Command-Line Switches -
<http://support.microsoft.com/kb/82821>
____________________________________________________________________
The most recent version of this document can be found at:
<http://www.us-cert.gov/cas/techalerts/TA07-103A.html>
____________________________________________________________________
Feedback can be directed to US-CERT Technical Staff. Please send
email to <cert@xxxxxxxx> with "TA07-103A Feedback VU#555920" in the
subject.
____________________________________________________________________
For instructions on subscribing to or unsubscribing from this
mailing list, visit <http://www.us-cert.gov/cas/signup.html>.
___________________________________________________________________
Produced 2007 by US-CERT, a government organization.
Terms of use:
<http://www.us-cert.gov/legal.html>
____________________________________________________________________
Revision History
April 13, 2007: Initial release
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iQEVAwUBRh/CIexOF3G+ig+rAQL5IQf/dh4srynjfyIpdpsZiBGpObV7C3Dauou2
fMVL2zjUgnkKxndldAxhgLMSrgjtlRaxVg4rH4yOqZ34fVpXuJul0zPwiiaaiEi4
C/YyEIAllmm/tZ5jyHUHxQZtmHwpKcbTH4XCFE2FbjVXcvl882Jg+6MJ7IpZy2Zw
qrWXwJOoZnjgEHmDhpToBv28MU3jDIKq6luMH9+LQMeU/N1Eb5UgRGddCtY51O/V
ZW9XX47oS0NMQ8yz3CQdujWz1kkx/J4gwI2QNjH3oeDgy+Ai8YHZnrbFAQY5xqmx
/gJ/+/fNKOwK2/2V4QIE7x1KVaGqfrHhGksXtbwehXbTJbO38PzeGw==
=egXN
-----END PGP SIGNATURE-----
