Then you need to download the OCO LCS module from DeveloperWorks and follow the instructions to copy them into the initrd used for installation. Mark Post -----Original Message----- From: Simon Tischer [mailto:S.Tischer@de.ibm.com] Sent: Tuesday, March 26, 2002 4:03 AM To: Rob van der Heij Cc: redhat-s390-list@redhat.com Subject: Re: [Redhat-s390-list] Setting up th0 hi i tested it and get following error error: no lcs module fount SIOCSIFADDR: No such device tr0: unknown interface: No such device. Mit freundlichen Grüßen Simon Tischer IBM Deutschland GmbH PL Ausbildung Stuttgart 1 KST:3167, Loc 70569-01 Pascalstraße 100, D-70548 Stuttgart Phone: +49 07031 - 16 4519 (Praxiseinsatz) *120-4519:int. Phone: +49 0711-785 5443 (Sekretriat ,ext.) *111-5443;int. E-Mail: S.Tischer@de.ibm.com Montag, 25. März 2002 19:12 To: Simon Tischer/Germany/IBM@IBMDE, redhat-s390-list@redhat.com cc: From: Rob van der Heij <rvdheij@iae.nl> Subject: Re: [Redhat-s390-list] Setting up th0 > >Please enter the network device you inted to use (e.g ctc0, escon0, iucv0, >eth0, tr0) >[here i typed tr0] > >Please enter any parameters you need to pass to the channel decive layer. >(e.g. "ctc0,0x600,0x601" will activate the ctc interface at I/O ports >0x600,0x6001): >[And here i dont know what to typ] lcs0,0x600,0x601,0,nr This is assuming your lcs device is at address 600/601 and for 'nr' you need the port number of the LCS device (depends on your hardward whether that is needed). Look in the Device Driver PDF on Developer Works. Rob _______________________________________________ Redhat-s390-list mailing list Redhat-s390-list@redhat.com https://listman.redhat.com/mailman/listinfo/redhat-s390-list _______________________________________________ Redhat-s390-list mailing list Redhat-s390-list@redhat.com https://listman.redhat.com/mailman/listinfo/redhat-s390-list
