[PATCH RT 2/4] net: gianfar: do not try to cleanup TX packets if they are not done

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.10.37-rt38-rc1 stable review patch.
If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>

What I observe is that the TX queue is not empty and does not make any
progress. gfar_clean_tx_ring() does not clean up the packet because it
is not completed yet.
The root cause is that the DMA engine did not start yet (it was
preempted before doing so) and that dumb loop, loops until that packet
is gone.
This is broken since c233cf4 ("gianfar: Fix tx napi polling").

What remains are spurious interrupts if CPU0 cleans up TX packages and
CPU1 returns with IRQ_NONE.

Cc: stable-rt@xxxxxxxxxxxxxxx
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Signed-off-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
---
 drivers/net/ethernet/freescale/gianfar.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 5c0efcc..8aecc1d 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -132,7 +132,6 @@ static int gfar_poll(struct napi_struct *napi, int budget);
 static void gfar_netpoll(struct net_device *dev);
 #endif
 int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
-static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue);
 static void gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
 			       int amount_pull, struct napi_struct *napi);
 void gfar_halt(struct net_device *dev);
@@ -2475,7 +2474,7 @@ static void gfar_align_skb(struct sk_buff *skb)
 }
 
 /* Interrupt Handler for Transmit complete */
-static void gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
+static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 {
 	struct net_device *dev = tx_queue->dev;
 	struct netdev_queue *txq;
@@ -2856,10 +2855,14 @@ static int gfar_poll(struct napi_struct *napi, int budget)
 			tx_queue = priv->tx_queue[i];
 			/* run Tx cleanup to completion */
 			if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx]) {
-				gfar_clean_tx_ring(tx_queue);
-				has_tx_work = 1;
+				int ret;
+
+				ret = gfar_clean_tx_ring(tx_queue);
+				if (ret)
+					has_tx_work++;
 			}
 		}
+		work_done += has_tx_work;
 
 		for_each_set_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
 			/* skip queue if not active */
-- 
1.8.5.3


--
To unsubscribe from this list: send the line "unsubscribe stable-rt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Development]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux