I pulled a SoundBlaster Live out of another computer and put it in my RH9 system that had just been freshly installed. Amazingly, the SB Live has exactly the same problem that the old ESS1869 ISA bus card has! Since thousands and thousands of people have installed SB Live's under Linux, this must be a problem with my system. It's rather old (AMD K6 at 300 MHz on an AT Socket 7 motherboard), but that's the only peculiar thing I can think of. I have not the slightest idea how to resolve this problem. Chuck ___________________________________ Bill: OK on the alias functionality. Here's a real description of my system and what it is/is not doing : Modules.conf : alias sound-slot-0 = sb post-install sound-slot-0 /bin/aumix etc. pre-remove sound-slot-0 /bin/aumix etc After boot-up lsmod does not show sb as being loaded. I then start CDPlayer and it thinks all is well and plays the CD, but no audio is outputted from the ESS1869 sound card. At this point, a new lsmod shows that sb is still not loaded. If I then do a modprobe sb, the sound appears immediately. Another lsmod shows me that 4 new modules are now present: sb, sb_lib, uart401, sound, and soundcore. What can I do? Thanks for the help so far. Chuck
- Follow-Ups:
- Re: [Sound] It's not just an ESS1869 problem.....
- From: Alan Cox
- Re: [Sound] It's not just an ESS1869 problem.....
- Prev by Date: [Sound] Re: ESS1869 sound - how to load sb in modules.conf
- Next by Date: Re: [Sound] It's not just an ESS1869 problem.....
- Previous by thread: [Sound] Re: ESS1869 sound - how to load sb in modules.conf
- Next by thread: Re: [Sound] It's not just an ESS1869 problem.....
- Index(es):