the thing bout getting the newer versions of pam , and
the kernel, is that u will find too many dependency
conflicts, if ur on rh8.0.
yes, like u said, rh9.0 it is.
i wish it werent this annoying to get the soundcard to
be recognised.
--- Yuval Aviel <aviel@xxxxxxxxxxxxx> wrote:
> Hello Anjan,
>
> The first one (pam = 0.75-40 is needed by
> (installed) pam-devel-0.75-40
> ) happened to me also. It simply means that there is
> a packaged
> (pam-devel) that is dependant on the package that
> you are about to
> upgrade (pam). If you apgrade pam, as you want to,
> it may cause problems.
> The solution is:
> remove pam-devel:
> rpm -e pam-devel
> If no other package is dependant on pam-devel,
> then it should be OK.
> If you need pam-devel, then you may also
> download the new version of
> pam-devel from the same site. But I don't think
> you'll need it.
>
>
> When you try to install the new kernel, it reports
> two problems; one
> with the pam package, hopefully we solved that one,
> and the other is
> with spamassasin
>
> I don't use spamassasin on my computer, so I can't
> tell much about it.
> It sees to me that the same logic of the pam-devel
> problem should work
> here ither. I.e. if you don't need it - erase it
> (rpm -e spamassassin).
> And if you do need it, upgrade it by using a package
> from the same site.
>
>
> An easier solution might be to upgrade to RH9 :)
>
> Best,
> Yuval.
>
> ANJAN MUSTAFI wrote:
> > Hello Yuval,
> >
> > I did as you wrote . I downloaded the four RPMs
> and followed your
> > instructions . The following things happened :
> >
> > [root@xxxxxxxxx linux-sound]# rpm -Uvh
> pam-0.75-48.i386.rpm
> > error: Failed dependencies:
> > pam = 0.75-40 is needed by (installed)
> pam-devel-0.75-40
> >
> > rpm -Uvh vixie-cron-3.0.1-74.i386.rpm -> No
> Problems !
> >
> > rpm -Uvh SysVinit-2.84-13.i386.rpm -> No problems
> !
> >
> > [root@xxxxxxxxx linux-sound]# rpm -ivh
> kernel-2.4.20-8.i686.rpm
> > error: Failed dependencies:
> > pam < 0.75-48 conflicts with
> kernel-2.4.20-8
> > spamassassin < 2.44-4.8.x conflicts with
> kernel-2.4.20-8
> >
> > What do I do now ??? Please help !!! I'm not an
> expert . I need all the
> > help in the world.
> >
> > Thanks in advance.
> >
> > Anjan Mustafi
> >
> >
> > --- sound-list-request@xxxxxxxxxx wrote:
> >
> >>Send Sound-list mailing list submissions to
> >> sound-list@xxxxxxxxxx
> >>
> >>To subscribe or unsubscribe via the World Wide
> Web, visit
> >>
>
https://listman.redhat.com/mailman/listinfo/sound-list
> >>or, via email, send a message with subject or body
> 'help' to
> >> sound-list-request@xxxxxxxxxx
> >>
> >>You can reach the person managing the list at
> >> sound-list-admin@xxxxxxxxxx
> >>
> >>When replying, please edit your Subject line so it
> is more specific
> >>than "Re: Contents of Sound-list digest..."
> >>
> >>
> >>>Today's Topics:
> >>
> >> 1. AC97 and i810 (Yuval Aviel)
> >>
> >
> >
> >>ATTACHMENT part 3.1 message/rfc822
> >>Date: Sat, 12 Apr 2003 03:32:57 +0300
> >>From: Yuval Aviel <aviel@xxxxxxxxxxxxx>
> >>To: sound-list@xxxxxxxxxx
> >>Subject: [Sound] AC97 and i810
> >>
> >>This message addresses all users that have RH8 and
> can't make their
> >>linux cooperate with their sound card.
> >>I spent lot of time around this problem, I hope
> this message will save
> >>yours.
> >>What I am about to suggest seems to me the easiest
> way of solving the
> >>problem but it is really a matter of taste.
> >>
> >>To make sure that we are talking on the same
> problem, look at my
> >>/var/log/message at the bottom of this message.
> >>
> >>My solution is to go to RH9's package list:
> >>
> >
> >
>
ftp://ftp.gmd.de/mirrors/redhat.com/redhat/linux/9/en/os/i386/RedHat/RPMS
> >
> >>and download the following rpms:
> >>
> >>pam-0.75-48.i386.rpm
> >>vixie-cron-3.0.1-74.i386.rpm
> >>SysVinit-2.84-13.i386.rpm
> >>kernel-2.4.20-8.i686.rpm
> >>
> >>Note that I choosed kernel for i686, but you
> should pick one that suites
> >>
> >>your system.
> >>
> >>Now Upgrade the first three (rpm -Uvh), and lastly
> install the kernel:
> >> rpm -ivh kernel-2.4.20-8.i686.rpm
> >>
> >>Reboot to the new kernel. It worked smoothly to
> me.
> >>
> >>Enjoy the sounds,
> >>Yuval Aviel.
> >>-----------------------------------------------
> >>Interdisciplinary center for neural computation
> >>Hebrew University, Jerusalem
> >>Israel
> >>-----------------------------------------------
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>Apr 6 12:47:01 localhost kernel: i810: Intel ICH4
> found at IO 0xe080
> >>and 0xe400, IRQ 3
> >>Apr 6 12:47:02 localhost modprobe: modprobe:
> Can't locate module
> >>sound-service-0-3
> >>Apr 6 12:47:02 localhost insmod:
>
>>/lib/modules/2.4.18-26.8.0/kernel/drivers/sound/i810_audio.o:
>
> >>init_module: No such device
> >>Apr 6 12:47:02 localhost insmod: Hint: insmod
> errors can be caused by
> >>incorrect module parameters, including invalid IO
> or
> >>IRQ parameters. You may find more
> information in syslog or the
> >>output from dmesg
> >>Apr 6 12:47:02 localhost insmod:
>
>>/lib/modules/2.4.18-26.8.0/kernel/drivers/sound/i810_audio.o:
> insmod
> >>sound-slot-0 failed
> >>Apr 6 12:47:02 localhost kernel: i810_audio:
> Codec not ready.. wait..
> >>no response.
> >>Apr 6 12:47:02 localhost kernel: i810_audio:
> Audio Controller supports
> >>6 channels.
> >>Apr 6 12:47:02 localhost kernel: i810_audio:
> Defaulting to base 2
> >>channel mode.
> >>Apr 6 12:47:02 localhost kernel: i810_audio:
> Primary codec not ready.
> >>Apr 6 12:47:02 localhost modprobe: modprobe:
> Can't locate module
> >>sound-service-0-0
> >>Apr 6 12:47:02 localhost kernel: Intel 810 + AC97
> Audio, version 0.22,
>
=== message truncated ===
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
[Index of Archives]
[Sound Cards]
[Kernel]
[Red Hat Install]
[Drives]
[Red Hat Development]
[Video 4 Linux]
[Gimp Users]
[Yosemite Trails]
