On Mon, May 31, 2004 10:26:44 AM -0700, Craig White (craigwhite@xxxxxxxxxxx) wrote: > On Sun, 2004-05-30 at 13:19, M. Fioretti wrote: > > Both its pins get IRQ 255. See my other posts here. > > Is this normal? How to fix it? > add to your grub.conf - i.e. > > title Fedora Core (2.6.5-1.358smp) > root (hd0,0) > kernel /vmlinuz-2.6.5-1.358smp ro root=LABEL=/ pci=biosirq > initrd /initrd-2.6.5-1.358smp.img > I have LILO on that laptop. I tried to boot with linux pci=biosirq to no avail. Should I have used another format? I've read online that that bridge uses IRQ 11. I have also noticed that switching from the first to the second /etc/pcmcia/config.opts file pasted below it goes from IRQ 255 to IRQ 0. How do I change those memory and I/O areas to make it seen with IRQ 11? TIA, Marco F. ######################################################################## # # ORIGINAL Local PCMCIA Configuration File # #---------------------------------------------------------------------- # System resources available for PCMCIA devices include port 0x100-0x4ff, port 0xc00-0xcff include memory 0xc0000-0xfffff include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff # High port numbers do not always work... # include port 0x1000-0x17ff # Extra port range for IBM Token Ring include port 0xa00-0xaff # Resources we should not use, even if they appear to be available # First built-in serial port exclude irq 4 # Second built-in serial port #exclude irq 3 # First built-in parallel port exclude irq 7 # PS/2 Mouse controller port, comment this out if you don't have a PS/2 # based mouse exclude irq 12 # Radeon ICP MCE's if you touch ports 380 to 3ff exclude port 0x380-0x3ff #---------------------------------------------------------------------- # Examples of options for loadable modules # To fix sluggish network with IBM ethernet adapter... #module "pcnet_cs" opts "mem_speed=600" # Options for IBM Token Ring adapters #module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000" # Options for Raylink/WebGear driver: uncomment only one line... # Generic ad-hoc network module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1" # Infrastructure network for older cards #module "ray_cs" opts "net_type=1 essid=ESSID1" # Infrastructure network for WebGear #module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256" # Options for WaveLAN/IEEE driver (AccessPoint mode)... #module "wvlan_cs" opts "station_name=MY_PC" # Options for WaveLAN/IEEE driver (ad-hoc mode)... #module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC" # Options for Xircom Netwave driver... #module "netwave_cs" opts "domain=0x100 scramble_key=0x0" ##################################################################### ##################################################################### # # MODIFIED AS SEEN ONLINE Local PCMCIA Configuration File # #---------------------------------------------------------------------- # System resources available for PCMCIA devices include port 0x100-0x4ff, port 0x1000-0x17ff include memory 0xc0000-0xfffff, memory 0xa0000000-0xa0ffffff exclude port 0x230-0x233 # Resources we should not use, even if they appear to be available # First built-in serial port exclude irq 4 # Second built-in serial port #exclude irq 3 # First built-in parallel port exclude irq 7 #sound card exclude irq 5 # PS/2 Mouse controller port, comment this out if you don't have a PS/2 # based mouse exclude irq 12 # Radeon ICP MCE's if you touch ports 380 to 3ff exclude port 0x380-0x3ff #---------------------------------------------------------------------- # Examples of options for loadable modules # To fix sluggish network with IBM ethernet adapter... #module "pcnet_cs" opts "mem_speed=600" # Options for IBM Token Ring adapters #module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000" # Options for Raylink/WebGear driver: uncomment only one line... # Generic ad-hoc network module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1" # Infrastructure network for older cards #module "ray_cs" opts "net_type=1 essid=ESSID1" # Infrastructure network for WebGear #module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256" # Options for WaveLAN/IEEE driver (AccessPoint mode)... #module "wvlan_cs" opts "station_name=MY_PC" # Options for WaveLAN/IEEE driver (ad-hoc mode)... #module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC" # Options for Xircom Netwave driver... #module "netwave_cs" opts "domain=0x100 scramble_key=0x0" -- Marco Fioretti mfioretti, at the server mclink.it Red Hat for low memory http://www.rule-project.org/en/ Technological progress has merely provided us with more efficient means for going backwards. Aldous Huxley -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
