Samsung 52x24x52 using Imation CD-R. (they are Good??) Anyway, the problem lies.. not in the CDR quality but the transfer rate from HD to CD-R. They simulation only gotten me like 24x-27x of transfer rate! That is the main problem.. I think.. HD's on UDMA5. Cheers, Mun Heng, Ow H/M Engineering Western Digital M'sia DID : 03-7870 5168 -----Original Message----- From: Randy Kelsoe [mailto:randykel@xxxxxxxxxx] Sent: Friday, September 26, 2003 3:36 PM To: shrike-list@xxxxxxxxxx Subject: Re: Burn Speed to CD-R (was Re: SATA problems) Ow Mun Heng wrote: >hehe.. No.. actually this is my dad's desktop.. (and Yes.. I should've >changed thread) > >nero for M$. (is there a nero for Linux?? If Yes.. I'm switching..) > >The media(imation) is rated at 1-48x. (tried 24,32,40,48x works on <24x) >Running simulation mode.. only yielded like ~3M to 4M/s transfer rate. If I >run the "test all drives transfer speed" I get up to 40MB/s. > >so.. what gives?? > > > My guess is that it might be related to the "BurnProof" function of the drive. I'm using The Imation 48X CD-R's, with a Plextor 40x12x40 CD-R, and cdrecord, using the "driveropts=burnfree" option, and no matter what speed I specify, cdrecord seems to choose its own burn speed (faster or slower). If the media is is of high quality, it will burn at a faster rate. Last time I looked, Yamaha CD-R's were rated as the best, followed by CompUSA's CD-R's, and Imation was close by. Yamaha's CD-R's are more expensive, but you might try buying a couple and see what speed they will burn. Not all burners are equal. You did not mention what brand of burner you use. Have you checked for firmware updates for the drive? -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
