Hello List,
I would appreciate some help to get this PCI SB Live working. It's on a new
Dell with a BIOS that doesn't have a PNP OS on/off selection. There are no
ISA slots.
I think I need a Linux driver for this SB from somewhere. The /dev/dsp is a
new device to me, so a link may be all that needed.
Regards, Frank K
System information follows:
Sound server informational message popup:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such device)
The sound server will continue, using the null output device.
root[1962] ls -al /dev/dsp
crw------- 1 frankk root 14, 3 Jan 30 02:24 /dev/dsp
root[1964] less -f /dev/dsp
/dev/dsp: No such device
/etc/modules.conf:
alias eth0 e100
alias usb-controller ehci-hcd
alias usb-controller1 usb-uhci
alias usb-controller ehci-hcd
>From /var/log/messages:
May 31 09:37:21 frankk-server1 modprobe: modprobe: Can't locate module
sound-slot-0
May 31 09:37:21 frankk-server1 modprobe: modprobe: Can't locate module
sound-service-0-3
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-slot-0
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-service-0-0
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-slot-0
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-service-0-0
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-slot-1
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-service-1-0
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-slot-1
May 31 09:37:22 frankk-server1 modprobe: modprobe: Can't locate module
sound-service-1-0
lspci:
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge
(rev 01)
00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge
(rev 01)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra
TF
02:01.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 01)
----------------------------------------------------------------------------
02:02.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
----------------------------------------------------------------------------
02:02.1 Input device controller: Creative Labs [SB Live! Value] Input device
controller
----------------------------------------------------------------------------
02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet
Controller (rev 81)
experpt from lspci -vv
02:02.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
Subsystem: Creative Labs: Unknown device 1003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at dcc0 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:02.1 Input device controller: Creative Labs [SB Live! Value] Input device
controller
Subsystem: Creative Labs: Unknown device 1003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at dcf0 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
