On May 14, 2003 11:37 am, antonio wrote:It works, tnx.
The scanner was working on RedHat 8.0, I made a fresh install of RedHat
9, and I followed same procedure as in RH8.0.
Even if I use the instruction modprobe
Forget about using the modprobe insturuction. Instead, modify your /etc/sane.d/epson.conf thus: Edit out the SCSI scanner entery and *enable* one of the final lines. ... and YES, the default file has two entries that have the exact content (as it was in RH 8.0).
# SCSI scanner: #scsi EPSON # first or the second entry. #usb /dev/usb/scanner0 usb /dev/usb/scanner0
Then just run xane again, and it will recognise the scanner. FYI, have a look at this RFE https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=80613
cheers,
Elton ;-)
Please note that I followed samer procedure as in previous releases.
1) mknod /dev/usbscanner0 c 180 48 2) chmod 666 /dev/usbscanner0 3) modified the line in epson.con to have usb /dev/usbscanner0
This procedure doesn't work.
I got back to last line as usb /dev/scanner0 and it worked immediately.
Tnx to all of you
Antonio
-- ________________________________
Mozilla 1.4a running on Linux Redhat 9
________________________________
