Red Hat 9 does not seem to be seeing my digital camera
when I connect the
camera to a USB port. (And it was working well on Red
Hat 8 with gphoto2 -- I
did a fresh install, not an upgrade.)
USB is working. I have a Keyspan serial port device
attached to the same
system. The Keyspan is working and I see it as:
/proc/bus/usb/001. (And the
Keyspan is listed in /proc/bus/usb/devices)
I expect the camera to show up as /proc/bus/usb/002
(It did in RH8).
However, there are no additional entries in
/proc/bus/usb, nor any messages in
/var/log/messages after I connect the camera. Also,
the camera is not listed
in /proc/bus/usb/devices.
The following usb drivers are loaded:
/proc/bus/usb]$ cat drivers
usbdevfs
hub
96-111: hiddev
hid
serial
I also tried using different USB ports on my epox
8RDA+ motherboard.
Any suggestions on how to get my Linux system to see
my digital camera would
be appreciated.
