I installed mkinitrd and initscripts from rawhide too, and all works now. I also hat to edit fstab and put the real root partition instad of the "LABEL=/" entry. On Fri, 2003-06-06 at 14:30, Anthony Joseph Seward wrote: > Comparing the versions of the RPMs that came with shrike, it seems like > the only thing that is needed is to add mod-init-tools in order to use a > 2.5 kernel. When I try and boot I get a kernel panic that complains > that there is no init. I'm using the same root partition as with my > stock RH kernels so I don't understand what could be the problem. Can > anyone help? > > Tony > ====== > [root@xxxxxxxx root]# depmod -V > module-init-tools 0.9.12 > ====== > # grub.conf generated by anaconda > # > # Note that you do not have to rerun grub after making changes to this > file > # NOTICE: You do not have a /boot partition. This means that > # all kernel and initrd paths are relative to /, eg. > # root (hd0,0) > # kernel /boot/vmlinuz-version ro root=/dev/hda1 > # initrd /boot/initrd-version.img > #boot=/dev/hda > default=1 > timeout=10 > splashimage=(hd0,0)/boot/grub/splash.xpm.gz > title 2.5.70 > root (hd0,0) > kernel /boot/vmlinuz-2.5.70 ro root=/dev/hda1 > initrd /boot/initrd-2.5.70.img > title Red Hat Linux (2.4.20-18.9) > root (hd0,0) > kernel /boot/vmlinuz-2.4.20-18.9 ro root=LABEL=/ idebus=66 > hdc=ide-scsi pci=biosirq > initrd /boot/initrd-2.4.20-18.9.img > title Red Hat Linux (2.4.20-8) > root (hd0,0) > kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/ idebus=66 > hdc=ide-scsi pci=biosirq > initrd /boot/initrd-2.4.20-8.img > > -- > Anthony Joseph Seward <anthony.seward@xxxxxxxx> -- Z <zleite@xxxxxxxxxxxxxx>
