Thanks to all who sent messages to help. I got it going this morning by commenting out the guest user line, adding the correct ip address format 192.168.1.0/255.255.255.0 (thank you Monsieur Messner) and setting security setting = user (thank you Monsieur Trahan). I can now log in from a windows machine and write, read, execute files. As always, I appreciate the help! My next task...netatalk. Thanks! Corey -----Original Message----- From: psyche-list-admin@xxxxxxxxxx [mailto:psyche-list-admin@xxxxxxxxxx] On Behalf Of Corey Head Sent: Thursday, April 03, 2003 8:50 PM To: psyche-list@xxxxxxxxxx Subject: RE: More Samba Gordon Messner Wrote: >Then I guess I need more information about your "global" >section. Without that, I wouldn't know what your samba >server is configured to disallow. Right then! Here you are. I didn't open up a lot of stuff in it as it seemed unnecessary...but perhaps I'm misreading things and they are. I appreciate what you have to offer! Thanks! Corey [global] # workgroup = NT-Domain-Name or Workgroup-Name workgroup = FRANCESCA # server string is the equivalent of the NT Description field server string = LinuxServer # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 192.168.0.0 # if you want to automatically load your printer list rather # than setting them up individually then you'll need this # printcap name = /etc/printcap # load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx # printing = lprng # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/%m.log # Put a capping on the size of the log files (in Kb). max log size = 0 # Security mode. Most people will want user level security. See # security_level.txt for details. security = user # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. ; password level = 8 ; username level = 8 # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents # encrypt passwords = yes # smb passwd file = /etc/samba/smbpasswd # The following is needed to keep smbclient from spouting spurious errors # when Samba is built with support for SSL. ; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt # The following are needed to allow password changing from Windows to # update the Linux system password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. # unix password sync = Yes # passwd program = /usr/bin/passwd %u # passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*au thentication*tokens*updated*successfully* # You can use PAM's password change control flag for Samba. If # enabled, then PAM will be used for password changes when requested # by an SMB client instead of the program listed in passwd program. # It should be possible to enable this without changing your passwd # chat parameter for most setups. # pam password change = yes # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # This parameter will control whether or not Samba should obey PAM's # account and session management directives. The default behavior is # to use PAM for clear text authentication only and to ignore any # account or session management. Note that Samba always ignores PAM # for authentication in the case of encrypt passwords = yes # obey pam restrictions = yes # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here ; remote announce = 192.168.1.255 192.168.2.44 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no -- Psyche-list mailing list Psyche-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/psyche-list -- Psyche-list mailing list Psyche-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/psyche-list
