ifcfg-wlan0 shows as follows
DEVICE=wlan0
ONBOOT=yes
BOOTPROTO=static # change this to static to specify an IP
addr
IPADDR=192.168.0.11
GATEWAY=192.168.0.1
NETMASK=255.255.255.0
NETWORK=192.168.0.0
BROADCAST=192.168.0.255
GATEWAYDEV=wlan0 # this is for setting default route
TYPE=Ethernet
USERCTL=yes
PEERDNS=no # this lets DHCP define the DNS setup
but when the device comes up it has no address assigned ifconfig wlan0 shows
Protokoll:Ethernet Hardware Adresse 00:00:00:00:00:00
BROADCAST MTYPE=Ethernetwlan0ULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:3 Basisadresse:0x100
--
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list
