Gerard, You will need 64 MB RAM to install in text mode and 128 MB to install in GUI mode for RH 8.0. And I seriously doubt that your box would run RH 8 with a GUI desktop such as KDE or Gnome. I tried to install on a 200 MHz Pentium box with either 48 or 64 MB and it ran slower then molasses in winter. TIA, Jim On Tue, 2003-01-07 at 21:25, Justin Zygmont wrote: > of course it is. > > > On 8 Jan 2003, Patrick wrote: > > > I am not sure if RH supports Pentium class computers. Please check the > > hardware compatibility list on redhat.com if a P75 is supported at all. > > > > Cheers, > > Patrick > > > > On Tue, 2003-01-07 at 13:13, Gerard Zwart wrote: > > > Hi folks, > > > > > > This will be my first time installing RH. > > > I was told to take and old P75 or so, with 64Mb. > > > > > > And so I did, unfortunately it is too old to boot up from CD. > > > No problem I thought, I make a bootbable flop, and this was described > > > in the readme also. > > > > > > But here comes my poblem, after 5 different floppy's and 3! Differente > > > stations on 3 different PC's I keep on getting the message "Controller > > > Failed" > > > > > > This is what I do: > > > > > > Rawrite > > > and then enter image location and name : > > > g:\images\boot.img > > > target: a: > > > then I put a fres formatted flop in the station and > > > press ENTER > > > after a while about 3 minutes being busy, I get this > > > message : " Controller has failed" > > > > > > Anybody knows what is happening, how to solve this, or any other > > > ways to make a bootable diskette. > > > > > > Thx in advance and chers to all. > > > > > > Gerard > > > Netherlands > > > zwartg@home.nl > > > > > > > > > > > -- -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
