> beerme@tampabay.rr.com wrote: > > I have recompiled my kernel several times by using the steps: > > - make mrproper > > - make xconfig > > - make dep > > - make clean > > - make modules > > - make modules_install > > - make install > > > > After that completes I also run a mkinitrd command to create the image file. > > When it all said I done I can go into my /boot directory and I see the new > > vmlinux file, image file, and system map files. I do not have a new modules > > file of a new config file. > > So how do I create those files or from whence do the come? Needless to say my > > boot under the new kernel fails so I have revert back to the old kernel. > > What was the exact command you used to create the initrd.img? You > probably need to add `--with=ext3` if you have ext3 partitions, and > `preload raid1` if you have raid 1. All I apologize in my zeal to get this out there so I can get a resolution I did skip a step above. PLEASE NOTE I DID DO A MAKE bzImage immediately after the "make dep". The "mkinitrd" command was as follows: mkinitrd /boot/initrd-2.4.19.img 2.4.19. One question here is am I using ext3 -> Yes, by the above statement I am guessing that is part of my problem. -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
