RESOLVED: Dual Monitor setup with Radeon 9700

["Charles Jones" <blaz3r@xxxxxxxxxxx>]

THANK YOU to Alex Deucher for his advice that finally fixed my problem.  
Apparently the default "VideoRam" device option is what was causing all the 
problems!

Here is my working X86Config, I hope it helps others who are having the same 
problem:

Section "ServerLayout"

       Identifier     "Default Layout"
       Screen      0  "Screen0" 0 0
       Screen      1  "Screen1" RightOf "Screen0"
       InputDevice    "Mouse0" "CorePointer"
       InputDevice    "Keyboard0" "CoreKeyboard"
       Option      "Xinerama"
EndSection

Section "Files"
       RgbPath      "/usr/X11R6/lib/X11/rgb"
       FontPath     "unix/:7100"
EndSection

Section "Module"
       Load  "dbe"
       Load  "extmod"
       Load  "fbdevhw"
       Load  "glx"
       Load  "record"
       Load  "freetype"
       Load  "type1"
       Load  "dri"
EndSection

Section "InputDevice"
       Identifier  "Keyboard0"
       Driver      "keyboard"
       Option      "XkbRules" "xfree86"
       Option      "XkbModel" "pc105"
       Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
       Identifier  "Mouse0"
       Driver      "mouse"
       Option      "Protocol" "IMPS/2"
       Option      "Device" "/dev/psaux"
       Option      "ZAxisMapping" "4 5"
       Option      "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
       Identifier  "DevInputMice"
       Driver      "mouse"
       Option      "Protocol" "IMPS/2"
       Option      "Device" "/dev/input/mice"
       Option      "ZAxisMapping" "4 5"
       Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
       Identifier   "Monitor0"
       VendorName   "Monitor Vendor"
       ModelName    "NEC MultiSync FE950"
       DisplaySize  370        280
       HorizSync    31.0 - 96.0
       VertRefresh  55.0 - 160.0
       Option      "dpms"
EndSection

Section "Monitor"
       Identifier   "Monitor1"
       VendorName   "Monitor Vendor"
       ModelName    "NEC MultiSync FE950"
       DisplaySize  370        280
       HorizSync    31.0 - 96.0
       VertRefresh  55.0 - 160.0
       Option      "dpms"
EndSection

Section "Device"

       BUSId       "PCI:1:0:0"
       Identifier  "Videocard0"
       Driver      "radeon"
       VendorName  "Videocard vendor"
       BoardName   "ATI Radeon 7500"
#       VideoRam    65536
       Screen      0
EndSection

Section "Device"

       BUSId       "PCI:1:0:0"
       Identifier  "Videocard1"
       Driver      "radeon"
       VendorName  "Videocard vendor"
       BoardName   "ATI Radeon 7500"
#       VideoRam    65536
       Screen      1
EndSection

Section "Screen"
       Identifier "Screen0"
       Device     "Videocard0"
       Monitor    "Monitor0"
       DefaultDepth     24
       SubSection "Display"
               Depth     24
               Modes    "1024x768" "800x600" "640x480"
       EndSubSection
EndSection

Section "Screen"
       Identifier "Screen1"
       Device     "Videocard1"
       Monitor    "Monitor1"
       DefaultDepth     24
       SubSection "Display"
               Depth     24
               Modes    "1024x768" "800x600" "640x480"
       EndSubSection
EndSection

Section "DRI"
       Group        0
       Mode         0666
EndSection

_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail


_______________________________________________
xfree86-list mailing list
xfree86-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/xfree86-list
IRC: #xfree86 on irc.redhat.com