Hello! I found the source code for Promise FastTrack S150 TX4 6 Port SATA RAID Controller. It was found at: http://www.promise.com/support/download/download2_eng.asp?productId=108&category=All&os=4# I am using Tao Linux, a RedHat Enterprise Linux clone, and it uses kernel 2.4.21. Here is what I did: 1. Installed kernel-BOOT.2.4.21-15.TL2 2. Booted with kernel-BOOT 3. Installed the kernel source 4. Compiled the code with Independent Modules 5. Started an installation with driver disk 6. Loaded the ft3xx module 7. Kernel Panic :( The system specs are: Processor: Pentium 4 2GHz Memory: 256 MB Dist: Tao Linux (RHEL 3 Clone) Kernel: 2.4.21-15.TL2BOOT GCC: 3.23 20030502 (Red Hat Linux 3.2.3-34) MotherBoard: Intel S875WP1-E ( LX ) with onboard Promise FastTrack S150 TX4 SATA RAID Controller When I loaded the module, the following error was shown: --- Oops: 0000 CPU: 0 EIP: 0060:[<c0188577>] Not Tainted EFLAGS: 00010246 EIP is at (2.4.21-15.TL2BOOT/i686) eax: 00000000 ebx: c1a8cb60 ecx: 33190100 edx: 00000020 esi: 00000054 edi: 00000000 ebp: 00000002 esp: cfe27e80 ds: 0068 es: 0068 ss: 0068 Process Loader (pid: 16, stackpage=cfe27000) Stack: 00000020 c018bd49 c134a110 00000020 00000001 cfdf92e4 00000066 080b9040 010001ff 00000000 00000000 ffffffff 00000012 00000066 c1a11800 00000000 080b9040 c018c4c8 c1a18000 00000001 c02fc592 00000066 00000066 cfe26000 Call Trace: [<c018bd49>] (0xcfe27e04) [<c018c4c8>] (0xcfe27ec4) [<c0180c3f>] (0xcfe27ee0) [<c017f459>] (0xcfe27f4c) [<c017d16b>] (0xcfe27f74)elements | <Space> selects | <F12> next screen [<c0180a84>] (0xcfe27f78) [<c0142170>] (0xcfe27f9c) Code: 8b 04 81 85 c8 74 10 83 e2 3f 0f b7 04 50 3d ff 01 00 00 89 Kernel Panic: Fatal Exception --- The driver disk and kernel error can be found at: http://www.kamogawa.com.br/RAID _______________________________________________ Redhat-devel-list mailing list Redhat-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/redhat-devel-list
