Feedback on reiser4-for-4.20-0 vs reiser4-for-4.20.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Niltze, Ed-

Feedback on latest reiser4 patches: I've found that reiser4-for-4.20.0 outperforms in development stability the reiser4-for-4.20.1 last patch.

I have been testing Debianized Linux kernel 4.20.10-1 with applied reiser4-for-4.20.1 patch and it generally performs adequate in daily computing
-- even when building VirtualBox-6.0.4. Nevertheless, on multiple occasions when attempting a kernel build with this running kernel I always
get a hanged system with typical instance dmesg as below. It does not matter if I am using transparent compression reiser4 feature and/or
'plain vanilla' reiser4 (SFRN) 4.0.2.

Hopefully this conveys some insight as my tests are in a couple of GPT partitions in my aging development HP notebook.

As mentioned in previous email, I have reverted to this kernel .config setting during my builds 

CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=no

since when it is enabled ('yes') resulting kernel build prevents VirtualBox from formatting in reiser4; more specifically,
 prevents the formatting of 2TB reiser4 slices in virtual machines.


Best Professional Regards.

--------------dmesg output----------

[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Linux version 4.20.0-1+reiser4.0.2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.20.10-1+reiser4.0.2 (2019-02-19)
[    0.000000] Command line: BOOT_IMAGE=/nahui/vmlinuz-4.20.0-1+reiser4.0.2-amd64 root=/dev/sda4 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ace3efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17FC, BIOS F.1C 01/23/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.058 MHz processor
[    0.002385] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002387] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002394] last_pfn = 0x44fe00 max_arch_pfn = 0x400000000
[    0.002398] MTRR default type: uncachable
[    0.002399] MTRR fixed ranges enabled:
[    0.002401]   00000-9FFFF write-back
[    0.002401]   A0000-BFFFF uncachable
[    0.002402]   C0000-FFFFF write-protect
[    0.002403] MTRR variable ranges enabled:
[    0.002405]   0 base 000000000 mask F80000000 write-back
[    0.002406]   1 base 080000000 mask FC0000000 write-back
[    0.002407]   2 base 0AD000000 mask FFF000000 uncachable
[    0.002408]   3 base 0AE000000 mask FFE000000 uncachable
[    0.002409]   4 base 0B0000000 mask FF0000000 uncachable
[    0.002410]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.002411]   6 base 100000000 mask F00000000 write-back
[    0.002411]   7 base 200000000 mask E00000000 write-back
[    0.002412]   8 base 400000000 mask FC0000000 write-back
[    0.002413]   9 base 440000000 mask FF0000000 write-back
[    0.003303] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003435] last_pfn = 0xad000 max_arch_pfn = 0x400000000
[    0.017349] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [(____ptrval____)]
[    0.017605] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.017607] reserving inaccessible SNB gfx pages
[    0.017612] BRK [0x96c01000, 0x96c01fff] PGTABLE
[    0.017614] BRK [0x96c02000, 0x96c02fff] PGTABLE
[    0.017615] BRK [0x96c03000, 0x96c03fff] PGTABLE
[    0.017668] BRK [0x96c04000, 0x96c04fff] PGTABLE
[    0.017671] BRK [0x96c05000, 0x96c05fff] PGTABLE
[    0.017797] BRK [0x96c06000, 0x96c06fff] PGTABLE
[    0.018081] BRK [0x96c07000, 0x96c07fff] PGTABLE
[    0.018095] BRK [0x96c08000, 0x96c08fff] PGTABLE
[    0.018109] BRK [0x96c09000, 0x96c09fff] PGTABLE
[    0.018122] BRK [0x96c0a000, 0x96c0afff] PGTABLE
[    0.018136] BRK [0x96c0b000, 0x96c0bfff] PGTABLE
[    0.018149] BRK [0x96c0c000, 0x96c0cfff] PGTABLE
[    0.018293] RAMDISK: [mem 0x34feb000-0x367ecfff]
[    0.018301] ACPI: Early table checksum verification disabled
[    0.018394] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.018398] ACPI: XSDT 0x00000000ACFFE120 00008C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.018404] ACPI: FACP 0x00000000ACFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.018410] ACPI: DSDT 0x00000000ACFEB000 00DB7F (v01 HP     INSYDE   00000000 MSFT 01000013)
[    0.018413] ACPI: FACS 0x00000000ACF6C000 000040
[    0.018416] ACPI: FACS 0x00000000ACF6C000 000040
[    0.018418] ACPI: ASF! 0x00000000ACFFD000 0000A5 (v32 HP     INSYDE   00000001 MSFT 01000013)
[    0.018421] ACPI: HPET 0x00000000ACFFB000 000038 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.018425] ACPI: APIC 0x00000000ACFFA000 00008C (v02 HP     INSYDE   00000001 MSFT 01000013)
[    0.018428] ACPI: MCFG 0x00000000ACFF9000 00003C (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.018431] ACPI: SLIC 0x00000000ACFEA000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.018434] ACPI: SSDT 0x00000000ACFE9000 00051F (v01 HP     INSYDE   00001000 MSFT 01000013)
[    0.018437] ACPI: BOOT 0x00000000ACFE7000 000028 (v01 HP     INSYDE   00000001 MSFT 01000013)
[    0.018440] ACPI: ASPT 0x00000000ACFE4000 000034 (v07 HP     INSYDE   00000001 MSFT 01000013)
[    0.018443] ACPI: SSDT 0x00000000ACFE3000 00094E (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.018447] ACPI: SSDT 0x00000000ACFE2000 000996 (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.018450] ACPI: SSDT 0x00000000ACFE1000 0002DA (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.018453] ACPI: SSDT 0x00000000ACFE0000 00035D (v01 HP     INSYDE   00003000 INTL 20100121)
[    0.018464] ACPI: Local APIC address 0xfee00000
[    0.018553] No NUMA configuration found
[    0.018554] Faking a node at [mem 0x0000000000000000-0x000000044fdfffff]
[    0.018558] NODE_DATA(0) allocated [mem 0x44fdf2000-0x44fdf6fff]
[    0.018596] Zone ranges:
[    0.018597]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.018599]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.018600]   Normal   [mem 0x0000000100000000-0x000000044fdfffff]
[    0.018601]   Device   empty
[    0.018602] Movable zone start for each node
[    0.018602] Early memory node ranges
[    0.018603]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.018604]   node   0: [mem 0x0000000000100000-0x00000000ace3efff]
[    0.018605]   node   0: [mem 0x00000000acfff000-0x00000000acffffff]
[    0.018606]   node   0: [mem 0x0000000100000000-0x000000044fdfffff]
[    0.018876] Zeroed struct page in unavailable ranges: 12836 pages
[    0.018877] Initmem setup node 0 [mem 0x0000000000001000-0x000000044fdfffff]
[    0.018879] On node 0 totalpages: 4180956
[    0.018880]   DMA zone: 64 pages used for memmap
[    0.018880]   DMA zone: 156 pages reserved
[    0.018881]   DMA zone: 3996 pages, LIFO batch:0
[    0.019017]   DMA32 zone: 11001 pages used for memmap
[    0.019018]   DMA32 zone: 704064 pages, LIFO batch:63
[    0.043722]   Normal zone: 54264 pages used for memmap
[    0.043724]   Normal zone: 3472896 pages, LIFO batch:63
[    0.156265] Reserving Intel graphics memory at [mem 0xada00000-0xaf9fffff]
[    0.156577] ACPI: PM-Timer IO Port: 0x408
[    0.156579] ACPI: Local APIC address 0xfee00000
[    0.156597] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.156599] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.156601] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.156603] ACPI: IRQ0 used by override.
[    0.156604] ACPI: IRQ9 used by override.
[    0.156607] Using ACPI (MADT) for SMP configuration information
[    0.156609] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.156615] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.156634] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.156636] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.156636] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.156637] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.156637] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.156639] PM: Registered nosave memory: [mem 0xace3f000-0xacebefff]
[    0.156640] PM: Registered nosave memory: [mem 0xacebf000-0xacfbefff]
[    0.156640] PM: Registered nosave memory: [mem 0xacfbf000-0xacffefff]
[    0.156642] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
[    0.156642] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
[    0.156643] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.156644] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.156644] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.156645] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.156646] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.156646] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.156647] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.156647] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.156648] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.156649] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.156649] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.156650] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.156650] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.156653] [mem 0xafa00000-0xdfffffff] available for PCI devices
[    0.156654] Booting paravirtualized kernel on bare hardware
[    0.156657] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.284243] random: get_random_bytes called from start_kernel+0x94/0x52a with crng_init=0
[    0.284250] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.284477] percpu: Embedded 44 pages/cpu @(____ptrval____) s142680 r8192 d29352 u262144
[    0.284485] pcpu-alloc: s142680 r8192 d29352 u262144 alloc=1*2097152
[    0.284486] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.284510] Built 1 zonelists, mobility grouping on.  Total pages: 4115471
[    0.284510] Policy zone: Normal
[    0.284512] Kernel command line: BOOT_IMAGE=/nahui/vmlinuz-4.20.0-1+reiser4.0.2-amd64 root=/dev/sda4 ro quiet
[    0.288730] Calgary: detecting Calgary via BIOS EBDA area
[    0.288736] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.337316] Memory: 16344264K/16723824K available (10245K kernel code, 1153K rwdata, 3332K rodata, 1580K init, 2376K bss, 379560K reserved, 0K cma-reserved)
[    0.337463] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.337469] Kernel/User page tables isolation: enabled
[    0.337485] ftrace: allocating 31968 entries in 125 pages
[    0.352779] rcu: Hierarchical RCU implementation.
[    0.352780] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.352782] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.352782] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.356248] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[    0.358243] Console: colour VGA+ 80x25
[    0.358248] printk: console [tty0] enabled
[    0.358267] ACPI: Core revision 20181003
[    0.358499] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.358510] hpet clockevent registered
[    0.358516] APIC: Switch to symmetric I/O mode setup
[    0.358586] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.359018] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.378515] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3f63a3d4, max_idle_ns: 440795257001 ns
[    0.378530] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.11 BogoMIPS (lpj=8780232)
[    0.378532] pid_max: default: 32768 minimum: 301
[    0.378562] LSM: Security Framework initializing
[    0.378563] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.378582] AppArmor: AppArmor initialized
[    0.381000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.382246] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.382306] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.382346] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.382596] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.382597] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.382602] mce: CPU supports 9 MCE banks
[    0.382620] process: using mwait in idle threads
[    0.382623] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.382624] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.382626] Spectre V2 : Mitigation: Full generic retpoline
[    0.382627] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.382627] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.382638] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.382638] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.382640] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.382803] Freeing SMP alternatives memory: 24K
[    0.386597] TSC deadline timer enabled
[    0.386600] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.386708] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.386732] ... version:                3
[    0.386733] ... bit width:              48
[    0.386733] ... generic registers:      4
[    0.386734] ... value mask:             0000ffffffffffff
[    0.386735] ... max period:             00007fffffffffff
[    0.386736] ... fixed-purpose events:   3
[    0.386736] ... event mask:             000000070000000f
[    0.386779] rcu: Hierarchical SRCU implementation.
[    0.387686] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.387758] smp: Bringing up secondary CPUs ...
[    0.387842] x86: Booting SMP configuration:
[    0.387844] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.404992] smp: Brought up 1 node, 8 CPUs
[    0.404992] smpboot: Max logical packages: 1
[    0.404992] smpboot: Total of 8 processors activated (35120.92 BogoMIPS)
[    0.407079] devtmpfs: initialized
[    0.407079] x86/mm: Memory block size: 128MB
[    0.407927] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
[    0.407927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.407927] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.407927] pinctrl core: initialized pinctrl subsystem
[    0.407927] NET: Registered protocol family 16
[    0.407927] audit: initializing netlink subsys (disabled)
[    0.407927] audit: type=2000 audit(1550689208.048:1): state=initialized audit_enabled=0 res=1
[    0.407927] cpuidle: using governor ladder
[    0.407927] cpuidle: using governor menu
[    0.407927] Simple Boot Flag at 0x44 set to 0x1
[    0.407927] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.407927] ACPI: bus type PCI registered
[    0.407927] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.407927] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.407927] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.407927] PCI: Using configuration type 1 for base access
[    0.407927] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.410556] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.410612] ACPI: Added _OSI(Module Device)
[    0.410613] ACPI: Added _OSI(Processor Device)
[    0.410614] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.410615] ACPI: Added _OSI(Processor Aggregator Device)
[    0.410616] ACPI: Added _OSI(Linux-Dell-Video)
[    0.410617] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.419766] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.421342] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.421752] ACPI: Dynamic OEM Table Load:
[    0.421760] ACPI: SSDT 0xFFFF9A9CBD009000 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.422179] ACPI: Dynamic OEM Table Load:
[    0.422184] ACPI: SSDT 0xFFFF9A9CBD036400 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.422450] ACPI: Dynamic OEM Table Load:
[    0.422454] ACPI: SSDT 0xFFFF9A9CBD01C400 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.423833] ACPI: EC: EC started
[    0.423834] ACPI: EC: interrupt blocked
[    0.426649] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.426651] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.426652] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.426653] ACPI: Interpreter enabled
[    0.426678] ACPI: (supports S0 S3 S4 S5)
[    0.426679] ACPI: Using IOAPIC for interrupt routing
[    0.426706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.426905] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.428552] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
[    0.433787] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.433792] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.433828] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.434299] PCI host bridge to bus 0000:00
[    0.434302] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.434304] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.434305] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.434307] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[    0.434309] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.434318] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.434421] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.434433] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.434439] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.434443] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.434560] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.434587] pci 0000:00:16.0: reg 0x10: [mem 0xc6504000-0xc650400f 64bit]
[    0.434667] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.434759] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.435532] pci 0000:00:1a.0: reg 0x10: [mem 0xc650a000-0xc650a3ff]
[    0.437839] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.437931] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.437955] pci 0000:00:1b.0: reg 0x10: [mem 0xc6500000-0xc6503fff 64bit]
[    0.438034] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.438122] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.438214] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.438306] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.438397] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.438490] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.438582] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.438677] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.438767] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.438873] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.439639] pci 0000:00:1d.0: reg 0x10: [mem 0xc6509000-0xc65093ff]
[    0.441939] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.442031] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.442218] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.442238] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.442246] pci 0000:00:1f.2: reg 0x14: [io  0x509c-0x509f]
[    0.442255] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.442263] pci 0000:00:1f.2: reg 0x1c: [io  0x5098-0x509b]
[    0.442271] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.442280] pci 0000:00:1f.2: reg 0x24: [mem 0xc6508000-0xc65087ff]
[    0.442323] pci 0000:00:1f.2: PME# supported from D3hot
[    0.442405] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.442425] pci 0000:00:1f.3: reg 0x10: [mem 0xc6506000-0xc65060ff 64bit]
[    0.442447] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
[    0.442615] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.442651] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.442686] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
[    0.442708] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
[    0.442826] pci 0000:01:00.0: supports D1 D2
[    0.442828] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.442969] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[    0.442973] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.442978] pci 0000:00:1c.0:   bridge window [mem 0xc5500000-0xc64fffff]
[    0.442984] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.443189] pci 0000:07:00.0: [8086:008b] type 00 class 0x028000
[    0.443402] pci 0000:07:00.0: reg 0x10: [mem 0xc4500000-0xc4501fff 64bit]
[    0.444140] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.444532] pci 0000:00:1c.1: PCI bridge to [bus 07-0c]
[    0.444537] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.444541] pci 0000:00:1c.1:   bridge window [mem 0xc4500000-0xc54fffff]
[    0.444547] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.444623] pci 0000:0d:00.0: [10ec:5209] type 00 class 0xff0000
[    0.444658] pci 0000:0d:00.0: reg 0x10: [mem 0xc3501000-0xc3501fff]
[    0.444740] pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.444825] pci 0000:0d:00.0: supports D1 D2
[    0.444826] pci 0000:0d:00.0: PME# supported from D1 D2 D3hot
[    0.444939] pci 0000:0d:00.1: [10ec:5209] type 00 class 0x080500
[    0.444975] pci 0000:0d:00.1: reg 0x10: [mem 0xc3500000-0xc35000ff]
[    0.445138] pci 0000:0d:00.1: supports D1 D2
[    0.445139] pci 0000:0d:00.1: PME# supported from D1 D2 D3hot
[    0.445267] pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
[    0.445272] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.445276] pci 0000:00:1c.2:   bridge window [mem 0xc3500000-0xc44fffff]
[    0.445282] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.445411] pci 0000:13:00.0: [1033:0194] type 00 class 0x0c0330
[    0.445498] pci 0000:13:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit]
[    0.445810] pci 0000:13:00.0: PME# supported from D0 D3hot D3cold
[    0.446033] pci 0000:00:1c.3: PCI bridge to [bus 13]
[    0.446040] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[    0.446533] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.446590] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    0.446643] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.446696] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.446748] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.446800] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    0.446852] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.446905] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.448309] ACPI: EC: interrupt unblocked
[    0.448329] ACPI: EC: event unblocked
[    0.448338] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.448340] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.448413] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.448413] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.448413] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.448413] vgaarb: loaded
[    0.448413] pps_core: LinuxPPS API ver. 1 registered
[    0.448413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    0.448413] PTP clock support registered
[    0.448413] EDAC MC: Ver: 3.0.0
[    0.448413] PCI: Using ACPI for IRQ routing
[    0.456979] PCI: pci_cache_line_size set to 64 bytes
[    0.457135] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.457137] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff]
[    0.457138] e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
[    0.457139] e820: reserve RAM buffer [mem 0x44fe00000-0x44fffffff]
[    0.457245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.457245] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.460547] clocksource: Switched to clocksource tsc-early
[    0.468751] VFS: Disk quotas dquot_6.6.0
[    0.468774] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.468886] AppArmor: AppArmor Filesystem Enabled
[    0.468906] pnp: PnP ACPI init
[    0.469075] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.469077] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.469079] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.469081] system 00:00: [io  0xffff] has been reserved
[    0.469083] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.469085] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.469086] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.469088] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.469095] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.469121] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.469171] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.469176] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.469226] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.469269] pnp 00:04: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[    0.469392] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.469394] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.469396] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.469397] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.469399] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.469401] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.469403] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.469405] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.469407] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.469409] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.469414] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.471213] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.471215] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
[    0.471220] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.471236] pnp: PnP ACPI: found 7 devices
[    0.477137] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.477143] pci 0000:0d:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.477182] pci 0000:00:1c.0: PCI bridge to [bus 01-06]
[    0.477186] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.477192] pci 0000:00:1c.0:   bridge window [mem 0xc5500000-0xc64fffff]
[    0.477196] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.477203] pci 0000:00:1c.1: PCI bridge to [bus 07-0c]
[    0.477206] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.477211] pci 0000:00:1c.1:   bridge window [mem 0xc4500000-0xc54fffff]
[    0.477216] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.477225] pci 0000:0d:00.0: BAR 6: assigned [mem 0xc3510000-0xc351ffff pref]
[    0.477228] pci 0000:00:1c.2: PCI bridge to [bus 0d-12]
[    0.477230] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.477235] pci 0000:00:1c.2:   bridge window [mem 0xc3500000-0xc44fffff]
[    0.477240] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.477246] pci 0000:00:1c.3: PCI bridge to [bus 13]
[    0.477251] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc34fffff]
[    0.477261] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.477263] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.477265] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.477266] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[    0.477268] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.477270] pci_bus 0000:01: resource 1 [mem 0xc5500000-0xc64fffff]
[    0.477271] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    0.477273] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.477274] pci_bus 0000:07: resource 1 [mem 0xc4500000-0xc54fffff]
[    0.477276] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    0.477278] pci_bus 0000:0d: resource 0 [io  0x2000-0x2fff]
[    0.477279] pci_bus 0000:0d: resource 1 [mem 0xc3500000-0xc44fffff]
[    0.477281] pci_bus 0000:0d: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[    0.477282] pci_bus 0000:13: resource 1 [mem 0xc3400000-0xc34fffff]
[    0.477368] NET: Registered protocol family 2
[    0.477534] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.477597] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.477839] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.477974] TCP: Hash tables configured (established 131072 bind 65536)
[    0.478019] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.478076] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.478169] NET: Registered protocol family 1
[    0.478174] NET: Registered protocol family 44
[    0.478184] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.498686] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 20009 usecs
[    0.518678] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 19500 usecs
[    0.530656] pci 0000:13:00.0: quirk_usb_early_handoff+0x0/0x6a0 took 11642 usecs
[    0.530662] PCI: CLS 64 bytes, default 64
[    0.530706] Unpacking initramfs...
[    0.992508] Freeing initrd memory: 24584K
[    0.992521] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.992523] software IO TLB: mapped [mem 0xa8e3f000-0xace3f000] (64MB)
[    0.993236] Initialise system trusted keyrings
[    0.993296] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.994760] zbud: loaded
[    1.603254] Key type asymmetric registered
[    1.603256] Asymmetric key parser 'x509' registered
[    1.603270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.603307] io scheduler noop registered
[    1.603307] io scheduler deadline registered
[    1.603346] io scheduler cfq registered (default)
[    1.603347] io scheduler mq-deadline registered
[    1.604009] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.604025] intel_idle: MWAIT substates: 0x21120
[    1.604026] intel_idle: v0.4.1 model 0x2A
[    1.604469] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.607255] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.608045] Linux agpgart interface v0.103
[    1.608102] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[    1.608102] AMD IOMMUv2 functionality not available on this system
[    1.608809] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.619459] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.619465] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.619683] mousedev: PS/2 mouse device common for all mice
[    1.619726] rtc_cmos 00:01: RTC can wake from S4
[    1.619935] rtc_cmos 00:01: registered as rtc0
[    1.619952] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.619964] intel_pstate: Intel P-state driver initializing
[    1.620698] ledtrig-cpu: registered to indicate activity on CPUs
[    1.621665] NET: Registered protocol family 10
[    1.624731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.635724] Segment Routing with IPv6
[    1.635778] mip6: Mobile IPv6
[    1.635783] NET: Registered protocol family 17
[    1.636052] mpls_gso: MPLS GSO support
[    1.637521] microcode: sig=0x206a7, pf=0x10, revision=0x2e
[    1.637882] microcode: Microcode Update Driver: v2.2.
[    1.637906] sched_clock: Marking stable (1635787494, 2079464)->(1664708268, -26841310)
[    1.638432] registered taskstats version 1
[    1.638434] Loading compiled-in X.509 certificates
[    1.683485] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    1.683519] zswap: loaded using pool lzo/zbud
[    1.683690] AppArmor: AppArmor sha1 policy hashing enabled
[    1.684122] rtc_cmos 00:01: setting system clock to 2019-02-20 19:00:09 UTC (1550689209)
[    1.685626] Freeing unused kernel image memory: 1580K
[    1.774650] Write protecting the kernel read-only data: 16384k
[    1.775982] Freeing unused kernel image memory: 2032K
[    1.776565] Freeing unused kernel image memory: 764K
[    1.793524] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.793525] x86/mm: Checking user space page tables
[    1.801372] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.801374] Run /init as init process
[    1.871265] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    1.877153] ACPI: bus type USB registered
[    1.877182] usbcore: registered new interface driver usbfs
[    1.877196] usbcore: registered new interface driver hub
[    1.877234] usbcore: registered new device driver usb
[    1.878717] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.882852] SCSI subsystem initialized
[    1.885694] sdhci: Secure Digital Host Controller Interface driver
[    1.885695] sdhci: Copyright(c) Pierre Ossman
[    1.885699] cryptd: max_cpu_qlen set to 1000
[    1.885807] xhci_hcd 0000:13:00.0: xHCI Host Controller
[    1.885815] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 1
[    1.885976] xhci_hcd 0000:13:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    1.886371] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    1.886373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.886375] usb usb1: Product: xHCI Host Controller
[    1.886377] usb usb1: Manufacturer: Linux 4.20.0-1+reiser4.0.2-amd64 xhci-hcd
[    1.886379] usb usb1: SerialNumber: 0000:13:00.0
[    1.886528] hub 1-0:1.0: USB hub found
[    1.886543] hub 1-0:1.0: 2 ports detected
[    1.886724] xhci_hcd 0000:13:00.0: xHCI Host Controller
[    1.886731] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 2
[    1.886735] xhci_hcd 0000:13:00.0: Host supports USB 3.0  SuperSpeed
[    1.888239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.888325] libata version 3.00 loaded.
[    1.888641] ehci-pci: EHCI PCI platform driver
[    1.889169] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.889178] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.889211] ehci-pci 0000:00:1a.0: debug port 2
[    1.889278] sdhci-pci 0000:0d:00.1: SDHCI controller found [10ec:5209] (rev 1)
[    1.889421] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.889454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[    1.889456] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.889457] usb usb2: Product: xHCI Host Controller
[    1.889459] usb usb2: Manufacturer: Linux 4.20.0-1+reiser4.0.2-amd64 xhci-hcd
[    1.889461] usb usb2: SerialNumber: 0000:13:00.0
[    1.889584] hub 2-0:1.0: USB hub found
[    1.889599] hub 2-0:1.0: 2 ports detected
[    1.890682] libphy: r8169: probed
[    1.890877] ahci 0000:00:1f.2: version 3.0
[    1.890990] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.891015] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.891019] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.891140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[    1.891143] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.891186] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 08:2e:5f:7f:b8:a4, XID 2c900800, IRQ 25
[    1.891189] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.891400] mmc0: SDHCI controller on PCI [0000:0d:00.1] using DMA
[    1.891698] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.891824] AVX version of gcm_enc/dec engaged.
[    1.891825] AES CTR mode by8 optimization enabled
[    1.893134] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.893153] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc650a000
[    1.897464] r8169 0000:01:00.0 eno1: renamed from eth0
[    1.903022] scsi host0: ahci
[    1.903214] scsi host1: ahci
[    1.903319] scsi host2: ahci
[    1.903430] scsi host3: ahci
[    1.903534] scsi host4: ahci
[    1.903630] scsi host5: ahci
[    1.903713] ata1: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508100 irq 34
[    1.903714] ata2: DUMMY
[    1.903715] ata3: DUMMY
[    1.903716] ata4: DUMMY
[    1.903717] ata5: DUMMY
[    1.903720] ata6: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508380 irq 34
[    1.910534] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.910609] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    1.910620] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.910621] usb usb3: Product: EHCI Host Controller
[    1.910623] usb usb3: Manufacturer: Linux 4.20.0-1+reiser4.0.2-amd64 ehci_hcd
[    1.910624] usb usb3: SerialNumber: 0000:00:1a.0
[    1.910875] hub 3-0:1.0: USB hub found
[    1.910893] hub 3-0:1.0: 2 ports detected
[    1.911223] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.911228] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.911240] ehci-pci 0000:00:1d.0: debug port 2
[    1.914366] thermal LNXTHERM:00: registered as thermal_zone0
[    1.914376] ACPI: Thermal Zone [THRM] (41 C)
[    1.915135] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.915156] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc6509000
[    1.931010] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.931123] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    1.931126] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.931129] usb usb4: Product: EHCI Host Controller
[    1.931131] usb usb4: Manufacturer: Linux 4.20.0-1+reiser4.0.2-amd64 ehci_hcd
[    1.931133] usb usb4: SerialNumber: 0000:00:1d.0
[    1.931397] hub 4-0:1.0: USB hub found
[    1.931407] hub 4-0:1.0: 2 ports detected
[    1.990621] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    1.990646] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    1.990722] clocksource: Switched to clocksource tsc
[    2.218301] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.218343] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.222441] ata6.00: ATAPI: hp       CDDVDW SN-208BB, HH01, max UDMA/100
[    2.232338] ata6.00: configured for UDMA/100
[    2.246625] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.266632] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.330890] ata1.00: ATA-10: ST2000LX001-1RG174, SDM1, max UDMA/133
[    2.330897] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.403960] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.403967] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.404649] hub 3-1:1.0: USB hub found
[    2.404796] hub 3-1:1.0: 6 ports detected
[    2.417646] ata1.00: configured for UDMA/133
[    2.423387] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.423394] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.424067] hub 4-1:1.0: USB hub found
[    2.424277] hub 4-1:1.0: 6 ports detected
[    2.427422] scsi 0:0:0:0: Direct-Access     ATA      ST2000LX001-1RG1 SDM1 PQ: 0 ANSI: 5
[    2.434959] scsi 5:0:0:0: CD-ROM            hp       CDDVDW SN-208BB  HH01 PQ: 0 ANSI: 5
[    2.477941] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.477950] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.477986] sd 0:0:0:0: [sda] Write Protect is off
[    2.477993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.478047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.481481]  sda: sda1 sda2 sda3 sda4 sda5
[    2.482137] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.535144] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.535151] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.535428] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.634975] random: fast init done
[    2.714630] usb 4-1.1: new low-speed USB device number 3 using ehci-pci
[    2.780104] psmouse serio1: synaptics: queried max coordinates: x [..5756], y [..4868]
[    2.834271] Loading Reiser4 (format release: 4.0.2) See www.namesys.com for a description of Reiser4.
[    2.865028] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 726294
[    2.883092] PM: Image not found (code -22)
[    2.909094] usb 4-1.1: New USB device found, idVendor=0e8f, idProduct=00a8, bcdDevice= 3.11
[    2.909097] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.909099] usb 4-1.1: Product: 2.4G RX
[    2.909101] usb 4-1.1: Manufacturer: DaKai
[    2.910754] reiser4: sda4: found disk format 4.0.2.
[    2.915070] hidraw: raw HID events driver (C) Jiri Kosina
[    2.916407] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.925556] usbcore: registered new interface driver usbhid
[    2.925558] usbhid: USB HID core driver
[    2.927075] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:0E8F:00A8.0001/input/input3
[    2.987125] hid-generic 0003:0E8F:00A8.0001: input,hidraw0: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:1d.0-1.1/input0
[    2.987853] input: DaKai 2.4G RX Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:0E8F:00A8.0002/input/input4
[    2.988152] input: DaKai 2.4G RX System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:0E8F:00A8.0002/input/input5
[    2.990623] usb 4-1.5: new full-speed USB device number 4 using ehci-pci
[    3.046854] input: DaKai 2.4G RX Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:0E8F:00A8.0002/input/input6
[    3.046939] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/0003:0E8F:00A8.0002/input/input7
[    3.047366] hid-generic 0003:0E8F:00A8.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:1d.0-1.1/input1
[    3.103911] usb 4-1.5: New USB device found, idVendor=8086, idProduct=0189, bcdDevice=69.19
[    3.103919] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.763238] reiser4: sda4: using Hybrid Transaction Model.
[    6.042653] random: crng init done
[    7.145271] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.163555] systemd[1]: Detected architecture x86-64.
[    7.183710] systemd[1]: Set hostname to <nahuiollin>.
[    7.529743] systemd[1]: Created slice User and Session Slice.
[    7.529856] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.530083] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.530352] systemd[1]: Created slice system-getty.slice.
[    7.530915] systemd[1]: Listening on Journal Socket.
[    7.531700] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.564599] systemd[1]: Starting Set the console keyboard layout...
[    7.754404] systemd-journald[359]: Received request to flush runtime journal from PID 1
[    8.189744] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20181003/utaddress-213)
[    8.189751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.189754] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181003/utaddress-213)
[    8.189759] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.189759] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181003/utaddress-213)
[    8.189763] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.189764] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181003/utaddress-213)
[    8.189768] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.189769] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.209330] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.209623] cfg80211: Loaded X.509 cert 'Debian: Ben Hutchings: d3fb2ddbf08efa676d2f21994ceb4159e69dd8d5'
[    8.209881] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.215888] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input8
[    8.215909] ACPI: Lid Switch [LID]
[    8.215967] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9
[    8.215998] ACPI: Power Button [PWRB]
[    8.216051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
[    8.216064] ACPI: Power Button [PWRF]
[    8.216162] ACPI: AC Adapter [AC] (on-line)
[    8.247415] battery: ACPI: Battery Slot [BAT0] (battery present)
[    8.267405] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    8.269799] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    8.308287] Intel(R) Wireless WiFi driver for Linux
[    8.308288] Copyright(c) 2003- 2015 Intel Corporation
[    8.308501] iwlwifi 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    8.324437] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.324465] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    8.370952] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.370954] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.370954] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.370955] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    8.390772] iwlwifi 0000:07:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[    8.390888] iwlwifi 0000:07:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.564332] input: HP Wireless hotkeys as /devices/virtual/input/input11
[    8.567501] [drm] Replacing VGA console driver
[    8.567942] Console: switching to colour dummy device 80x25
[    8.567976] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[    8.568740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.568740] [drm] Driver supports precise vblank timestamp query.
[    8.569121] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.587699] hp_accel: laptop model unknown, using default axes configuration
[    8.636807] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    8.636810] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    8.636811] iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    8.636813] iwlwifi 0000:07:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[    8.675465] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[    8.675974] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.676213] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    8.676321] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.688259] fbcon: inteldrmfb (fb0) is primary device
[    8.926680] lis3lv02d: 8 bits 3DC sensor found
[    9.044825] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    9.053703] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.062859] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=2 (0xf/0xd/0x0/0x0/0x0) type:speaker
[    9.062861] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.062862] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    9.062863] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    9.062864] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    9.062866] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    9.062868] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[    9.119713] hp_wmi: query 0xd returned error 0x5
[    9.119765] input: HP WMI hotkeys as /devices/virtual/input/input15
[    9.120252] Adding 9765884k swap on /dev/sda3.  Priority:-2 extents:1 across:9765884k FS
[    9.125033] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.125711] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.125753] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    9.125793] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    9.166263] pci_bus 0000:01: Allocating resources
[    9.166287] pci_bus 0000:07: Allocating resources
[    9.166353] pci_bus 0000:0d: Allocating resources
[    9.166379] pci_bus 0000:13: Allocating resources
[    9.166446] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 13] add_size 1000
[    9.166449] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 13] add_size 200000 add_align 100000
[    9.166460] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref]
[    9.166464] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x6000-0x6fff]
[    9.167241] pci_bus 0000:01: Allocating resources
[    9.167261] pci_bus 0000:07: Allocating resources
[    9.167312] pci_bus 0000:0d: Allocating resources
[    9.167335] pci_bus 0000:13: Allocating resources
[    9.362647] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input19
[    9.463952] Console: switching to colour frame buffer device 170x48
[    9.470041] Bluetooth: Core ver 2.22
[    9.470052] NET: Registered protocol family 31
[    9.470053] Bluetooth: HCI device and connection manager initialized
[    9.470057] Bluetooth: HCI socket layer initialized
[    9.470058] Bluetooth: L2CAP socket layer initialized
[    9.470061] Bluetooth: SCO socket layer initialized
[    9.482923] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.500581] iwlwifi 0000:07:00.0 wlo1: renamed from wlan0
[    9.599050] usbcore: registered new interface driver btusb
[    9.609397] intel_rapl: Found RAPL domain package
[    9.609399] intel_rapl: Found RAPL domain core
[    9.609400] intel_rapl: Found RAPL domain uncore
[    9.609405] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.784609] iTCO_vendor_support: vendor-support=0
[    9.785721] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.785773] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    9.785934] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.233102] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   11.259165] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   12.066601] pci_bus 0000:01: Allocating resources
[   12.066621] pci_bus 0000:07: Allocating resources
[   12.066669] pci_bus 0000:0d: Allocating resources
[   12.066689] pci_bus 0000:13: Allocating resources
[   12.067282] pci_bus 0000:01: Allocating resources
[   12.067299] pci_bus 0000:07: Allocating resources
[   12.067345] pci_bus 0000:0d: Allocating resources
[   12.067365] pci_bus 0000:13: Allocating resources
[   12.247827] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.247828] Bluetooth: BNEP filters: protocol multicast
[   12.247832] Bluetooth: BNEP socket layer initialized
[   13.052735] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   13.060188] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   13.060414] RTL8211E Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[   13.276862] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   13.285381] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   13.297511] iwlwifi 0000:07:00.0: Radio type=0x2-0x2-0x1
[   13.395411] iwlwifi 0000:07:00.0: Radio type=0x2-0x2-0x1
[   13.458773] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   13.485547] iwlwifi 0000:07:00.0: Radio type=0x2-0x2-0x1
[   13.584039] iwlwifi 0000:07:00.0: Radio type=0x2-0x2-0x1
[   13.647287] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   13.780689] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   14.287968] iwlwifi 0000:07:00.0: Radio type=0x2-0x2-0x1
[   14.384339] iwlwifi 0000:07:00.0: Radio type=0x2-0x2-0x1
[   14.450251] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   14.492277] wlo1: authenticate with e0:22:03:71:5e:a5
[   14.497577] wlo1: send auth to e0:22:03:71:5e:a5 (try 1/3)
[   14.506433] wlo1: authenticated
[   14.510579] wlo1: associate with e0:22:03:71:5e:a5 (try 1/3)
[   14.516923] wlo1: RX AssocResp from e0:22:03:71:5e:a5 (capab=0x411 status=0 aid=1)
[   14.525253] wlo1: associated
[   14.630278] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   41.720307] pci_bus 0000:01: Allocating resources
[   41.720336] pci_bus 0000:07: Allocating resources
[   41.720404] pci_bus 0000:0d: Allocating resources
[   41.720429] pci_bus 0000:13: Allocating resources
[   42.409246] fuse init (API version 7.28)
[   45.350947] Bluetooth: RFCOMM TTY layer initialized
[   45.350955] Bluetooth: RFCOMM socket layer initialized
[   45.350962] Bluetooth: RFCOMM ver 1.11
[ 2380.343553] reiser4: sda2: found disk format 4.0.2.
[ 2385.153741] reiser4: sda2: using Hybrid Transaction Model.
[ 9397.054052] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[11550.621506] perf: interrupt took too long (3140 > 3130), lowering kernel.perf_event_max_sample_rate to 63500
[11843.341992] INFO: task FileBlockCache:4213 blocked for more than 120 seconds.
[11843.342005]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.342010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.342015] FileBlockCache  D    0  4213   1587 0x00000320
[11843.342022] Call Trace:
[11843.342042]  ? __schedule+0x3f5/0x880
[11843.342048]  schedule+0x32/0x80
[11843.342087]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.342095]  ? remove_wait_queue+0x60/0x60
[11843.342122]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.342156]  traverse_tree+0x11a/0xa60 [reiser4]
[11843.342191]  ? append_last_extent+0x183/0x1e0 [reiser4]
[11843.342222]  ? reiser4_seal_validate+0x98/0xe0 [reiser4]
[11843.342247]  ? reiser4_seal_init+0x2f/0x60 [reiser4]
[11843.342273]  ? cbk_cache_search+0x6c/0x2e0 [reiser4]
[11843.342298]  reiser4_object_lookup+0x151/0x160 [reiser4]
[11843.342304]  ? update_load_avg+0x470/0x550
[11843.342309]  ? account_entity_enqueue+0xc5/0xf0
[11843.342339]  reiser4_cut_tree_object+0x7f/0x200 [reiser4]
[11843.342348]  ? pollwake+0x74/0x90
[11843.342355]  ? wake_up_q+0x70/0x70
[11843.342359]  ? __wake_up_common+0x96/0x180
[11843.342386]  ? reiser4_grab+0x54/0xd0 [reiser4]
[11843.342412]  ? reiser4_grab_space+0x3c/0x80 [reiser4]
[11843.342446]  ? validate_extended_coord+0x70/0x70 [reiser4]
[11843.342476]  cut_file_items+0x11f/0x1c0 [reiser4]
[11843.342507]  shorten_file+0x31/0x320 [reiser4]
[11843.342536]  delete_object_unix_file+0x3a/0xa0 [reiser4]
[11843.342568]  reiser4_evict_inode+0x80/0xd0 [reiser4]
[11843.342574]  evict+0xc1/0x1c0
[11843.342581]  __dentry_kill+0xd3/0x180
[11843.342587]  dentry_kill+0x4d/0x1b0
[11843.342593]  dput+0xd7/0x130
[11843.342602]  __fput+0x115/0x1d0
[11843.342610]  task_work_run+0x8a/0xb0
[11843.342618]  exit_to_usermode_loop+0xe8/0xf0
[11843.342624]  do_syscall_64+0xfb/0x110
[11843.342632]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.342638] RIP: 0033:0x7fa8b4e9826d
[11843.342650] Code: Bad RIP value.
[11843.342653] RSP: 002b:00007fa8914b2c50 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
[11843.342658] RAX: 0000000000000000 RBX: 00007fa89ac8f070 RCX: 00007fa8b4e9826d
[11843.342661] RDX: 00007fa8914b3a30 RSI: 0000000000000001 RDI: 0000000000000023
[11843.342664] RBP: 0000000000000000 R08: 00007ffd19db20b0 R09: 00007ffd19db2080
[11843.342667] R10: 00007fa8914b2c80 R11: 0000000000000293 R12: 00000000ffffffff
[11843.342670] R13: 00007fa87d10b400 R14: 00007fa89578e940 R15: 0000000000000001
[11843.342683] INFO: task TaskSchedulerFo:23545 blocked for more than 120 seconds.
[11843.342688]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.342692] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.342696] TaskSchedulerFo D    0 23545   1189 0x00000000
[11843.342701] Call Trace:
[11843.342707]  ? __schedule+0x3f5/0x880
[11843.342712]  schedule+0x32/0x80
[11843.342719]  io_schedule+0x12/0x40
[11843.342726]  __lock_page+0x138/0x200
[11843.342732]  ? file_check_and_advance_wb_err+0xd0/0xd0
[11843.342760]  write_jnodes_to_disk_extent+0x374/0x560 [reiser4]
[11843.342786]  ? zlook+0x15/0x70 [reiser4]
[11843.342816]  ? utmost_child_internal+0x45/0x80 [reiser4]
[11843.342844]  write_jnode_list+0x7f/0xb0 [reiser4]
[11843.342873]  reiser4_write_fq+0x81/0x230 [reiser4]
[11843.342909]  ? longterm_unlock_znode+0xbf/0x2a0 [reiser4]
[11843.342942]  flush_current_atom+0x3cf/0x8b0 [reiser4]
[11843.342984]  commit_txnh+0x4a5/0x590 [reiser4]
[11843.343022]  ? reiser4_txn_restart+0x1e/0x80 [reiser4]
[11843.343057]  ? force_commit_atom+0x4f/0x60 [reiser4]
[11843.343089]  ? txnmgr_force_commit_all+0x116/0x140 [reiser4]
[11843.343135]  ? reiser4_sync_common+0x32/0x60 [reiser4]
[11843.343144]  ? do_fsync+0x38/0x60
[11843.343150]  ? __x64_sys_fdatasync+0x13/0x20
[11843.343158]  ? do_syscall_64+0x55/0x110
[11843.343166]  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.343232] INFO: task cc1:32266 blocked for more than 120 seconds.
[11843.343239]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.343245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.343251] cc1             D    0 32266  32265 0x00000000
[11843.343257] Call Trace:
[11843.343267]  ? __schedule+0x3f5/0x880
[11843.343274]  schedule+0x32/0x80
[11843.343309]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.343316]  ? remove_wait_queue+0x60/0x60
[11843.343350]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.343388]  cbk_cache_search+0x10f/0x2e0 [reiser4]
[11843.343425]  reiser4_object_lookup+0xf2/0x160 [reiser4]
[11843.343472]  find_file_item+0x119/0x160 [reiser4]
[11843.343515]  update_extents+0xbd/0x260 [reiser4]
[11843.343557]  ? reiser4_write_extent+0x89a/0x900 [reiser4]
[11843.343592]  reiser4_write_extent+0x89a/0x900 [reiser4]
[11843.343607]  ? cap_inode_need_killpriv+0x1a/0x30
[11843.343617]  ? security_inode_need_killpriv+0x22/0x40
[11843.343624]  ? dentry_needs_remove_privs.part.21+0x19/0x40
[11843.343629]  ? file_remove_privs+0x8a/0xd0
[11843.343670]  write_unix_file+0x159/0x4d0 [reiser4]
[11843.343709]  ? update_extents+0x260/0x260 [reiser4]
[11843.343749]  reiser4_write_dispatch+0xf8/0x500 [reiser4]
[11843.343758]  ? __handle_mm_fault+0xf4a/0x1210
[11843.343767]  ? common_file_perm+0x4e/0x110
[11843.343776]  vfs_write+0xb0/0x190
[11843.343785]  ksys_write+0x52/0xc0
[11843.343794]  do_syscall_64+0x55/0x110
[11843.343803]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.343809] RIP: 0033:0x7fc035388970
[11843.343818] Code: Bad RIP value.
[11843.343823] RSP: 002b:00007fff29dd4bf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[11843.343830] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007fc035388970
[11843.343835] RDX: 0000000000010000 RSI: 0000000002fc0f50 RDI: 0000000000000009
[11843.343839] RBP: 0000000002fc0f50 R08: 0000000002f41520 R09: 00007fc036c1ec80
[11843.343843] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000010000
[11843.343847] R13: 0000000000000001 R14: 0000000002f41440 R15: 0000000000010000
[11843.343856] INFO: task gcc-6:32326 blocked for more than 120 seconds.
[11843.343864]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.343867] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.343871] gcc-6           D    0 32326  32325 0x00000000
[11843.343876] Call Trace:
[11843.343883]  ? __schedule+0x3f5/0x880
[11843.343888]  schedule+0x32/0x80
[11843.343916]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.343922]  ? remove_wait_queue+0x60/0x60
[11843.343946]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.343976]  cbk_cache_search+0x10f/0x2e0 [reiser4]
[11843.344002]  reiser4_object_lookup+0xf2/0x160 [reiser4]
[11843.344008]  ? enqueue_entity+0x112/0x610
[11843.344037]  reiser4_cut_tree_object+0x7f/0x200 [reiser4]
[11843.344056]  ? __wake_up_common_lock+0x89/0xc0
[11843.344063]  ? fsnotify_add_event+0x132/0x170
[11843.344090]  ? reiser4_grab+0x54/0xd0 [reiser4]
[11843.344116]  ? reiser4_grab_space+0x3c/0x80 [reiser4]
[11843.344146]  ? validate_extended_coord+0x70/0x70 [reiser4]
[11843.344173]  cut_file_items+0x11f/0x1c0 [reiser4]
[11843.344179]  ? _cond_resched+0x16/0x40
[11843.344206]  shorten_file+0x31/0x320 [reiser4]
[11843.344233]  delete_object_unix_file+0x3a/0xa0 [reiser4]
[11843.344265]  reiser4_evict_inode+0x80/0xd0 [reiser4]
[11843.344270]  evict+0xc1/0x1c0
[11843.344275]  do_unlinkat+0x13f/0x320
[11843.344282]  do_syscall_64+0x55/0x110
[11843.344289]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.344292] RIP: 0033:0x7ff9140f80e7
[11843.344299] Code: Bad RIP value.
[11843.344301] RSP: 002b:00007ffd40d89f68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[11843.344307] RAX: ffffffffffffffda RBX: 0000000000cfbfc0 RCX: 00007ff9140f80e7
[11843.344310] RDX: 00007ffd40d89f70 RSI: 00007ffd40d89f70 RDI: 0000000000cfbfc0
[11843.344312] RBP: 00007ffd40d8a228 R08: 0000000000000000 R09: 0000000000000007
[11843.344316] R10: 00000000000000d5 R11: 0000000000000246 R12: 00000000004031e0
[11843.344318] R13: 00007ffd40d8a220 R14: 0000000000000000 R15: 0000000000000000
[11843.344324] INFO: task gcc-6:32338 blocked for more than 120 seconds.
[11843.344330]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.344333] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.344337] gcc-6           D    0 32338  32337 0x00000000
[11843.344342] Call Trace:
[11843.344348]  ? __schedule+0x3f5/0x880
[11843.344352]  ? __schedule+0x3fd/0x880
[11843.344357]  schedule+0x32/0x80
[11843.344363]  io_schedule+0x12/0x40
[11843.344369]  wait_on_page_bit+0x137/0x200
[11843.344375]  ? file_check_and_advance_wb_err+0xd0/0xd0
[11843.344404]  reiser4_wait_page_writeback+0x4e/0x80 [reiser4]
[11843.344433]  reiser4_uncapture_page+0xa0/0x190 [reiser4]
[11843.344466]  reiser4_invalidatepage+0xcd/0x1a0 [reiser4]
[11843.344475]  truncate_cleanup_page+0x6f/0xc0
[11843.344481]  truncate_inode_pages_range+0x220/0x8b0
[11843.344512]  ? lookup_cde+0x58/0x110 [reiser4]
[11843.344541]  ? reiser4_try_capture+0x763/0xc00 [reiser4]
[11843.344548]  ? _cond_resched+0x16/0x40
[11843.344553]  ? down_write+0xe/0x40
[11843.344558]  ? unmap_mapping_pages+0x5e/0x130
[11843.344587]  reiser4_invalidate_pages+0x46/0x60 [reiser4]
[11843.344616]  kill_hook_extent+0x157/0x4a0 [reiser4]
[11843.344645]  ? create_hook_extent+0xd0/0xd0 [reiser4]
[11843.344672]  call_kill_hooks+0xa7/0xe0 [reiser4]
[11843.344699]  ? kill_units+0x80/0x80 [reiser4]
[11843.344722]  ? kill_head+0x20/0x20 [reiser4]
[11843.344745]  ? keyeq+0x20/0x20 [reiser4]
[11843.344771]  prepare_for_compact.isra.29+0x609/0x730 [reiser4]
[11843.344798]  ? lock_object+0x96/0x100 [reiser4]
[11843.344803]  ? _cond_resched+0x16/0x40
[11843.344825]  ? jload_gfp+0x73/0x1d0 [reiser4]
[11843.344851]  kill_node40+0x3d/0xe0 [reiser4]
[11843.344877]  carry_cut+0x54/0x90 [reiser4]
[11843.344902]  reiser4_carry+0x1c4/0x360 [reiser4]
[11843.344926]  ? reiser4_add_carry+0x24/0x40 [reiser4]
[11843.344952]  kill_node_content+0x143/0x210 [reiser4]
[11843.344978]  cut_tree_worker_common+0x207/0x3f0 [reiser4]
[11843.345004]  ? reiser4_delete_node+0x220/0x220 [reiser4]
[11843.345026]  reiser4_cut_tree_object+0xf2/0x200 [reiser4]
[11843.345059]  ? validate_extended_coord+0x70/0x70 [reiser4]
[11843.345086]  cut_file_items+0x11f/0x1c0 [reiser4]
[11843.345092]  ? _cond_resched+0x16/0x40
[11843.345118]  shorten_file+0x31/0x320 [reiser4]
[11843.345145]  delete_object_unix_file+0x3a/0xa0 [reiser4]
[11843.345177]  reiser4_evict_inode+0x80/0xd0 [reiser4]
[11843.345182]  evict+0xc1/0x1c0
[11843.345186]  do_unlinkat+0x13f/0x320
[11843.345193]  do_syscall_64+0x55/0x110
[11843.345200]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.345203] RIP: 0033:0x7f55315ed0e7
[11843.345208] Code: Bad RIP value.
[11843.345211] RSP: 002b:00007ffdc4e47768 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[11843.345215] RAX: ffffffffffffffda RBX: 0000000001436980 RCX: 00007f55315ed0e7
[11843.345218] RDX: 00007ffdc4e47770 RSI: 00007ffdc4e47770 RDI: 0000000001436980
[11843.345221] RBP: 00007ffdc4e47a28 R08: 0000000000000000 R09: 0000000000000007
[11843.345224] R10: 00000000000000d5 R11: 0000000000000246 R12: 00000000004031e0
[11843.345227] R13: 00007ffdc4e47a20 R14: 0000000000000000 R15: 0000000000000000
[11843.345233] INFO: task gcc-6:32357 blocked for more than 120 seconds.
[11843.345238]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.345242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.345246] gcc-6           D    0 32357  32356 0x00000000
[11843.345250] Call Trace:
[11843.345256]  ? __schedule+0x3f5/0x880
[11843.345261]  schedule+0x32/0x80
[11843.345286]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.345291]  ? remove_wait_queue+0x60/0x60
[11843.345315]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.345345]  cbk_cache_search+0x10f/0x2e0 [reiser4]
[11843.345373]  reiser4_object_lookup+0xf2/0x160 [reiser4]
[11843.345402]  reiser4_cut_tree_object+0x7f/0x200 [reiser4]
[11843.345407]  ? __wake_up_common_lock+0x89/0xc0
[11843.345413]  ? fsnotify_add_event+0x132/0x170
[11843.345440]  ? reiser4_grab+0x54/0xd0 [reiser4]
[11843.345466]  ? reiser4_grab_space+0x3c/0x80 [reiser4]
[11843.345496]  ? validate_extended_coord+0x70/0x70 [reiser4]
[11843.345522]  cut_file_items+0x11f/0x1c0 [reiser4]
[11843.345528]  ? _cond_resched+0x16/0x40
[11843.345553]  shorten_file+0x31/0x320 [reiser4]
[11843.345579]  delete_object_unix_file+0x3a/0xa0 [reiser4]
[11843.345610]  reiser4_evict_inode+0x80/0xd0 [reiser4]
[11843.345615]  evict+0xc1/0x1c0
[11843.345619]  do_unlinkat+0x13f/0x320
[11843.345626]  do_syscall_64+0x55/0x110
[11843.345633]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.345636] RIP: 0033:0x7f531870e0e7
[11843.345641] Code: Bad RIP value.
[11843.345643] RSP: 002b:00007ffc0e37bc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[11843.345648] RAX: ffffffffffffffda RBX: 0000000001182fd0 RCX: 00007f531870e0e7
[11843.345651] RDX: 00007ffc0e37bc60 RSI: 00007ffc0e37bc60 RDI: 0000000001182fd0
[11843.345654] RBP: 00007ffc0e37bf18 R08: 0000000000000000 R09: 0000000000000007
[11843.345656] R10: 00000000000000d5 R11: 0000000000000246 R12: 00000000004031e0
[11843.345659] R13: 00007ffc0e37bf10 R14: 0000000000000000 R15: 0000000000000000
[11843.345667] INFO: task cc1:32389 blocked for more than 120 seconds.
[11843.345672]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.345675] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.345679] cc1             D    0 32389  32384 0x00000000
[11843.345683] Call Trace:
[11843.345689]  ? __schedule+0x3f5/0x880
[11843.345694]  schedule+0x32/0x80
[11843.345719]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.345724]  ? remove_wait_queue+0x60/0x60
[11843.345747]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.345777]  cbk_cache_search+0x10f/0x2e0 [reiser4]
[11843.345804]  reiser4_object_lookup+0xf2/0x160 [reiser4]
[11843.345809]  ? __handle_mm_fault+0xf4a/0x1210
[11843.345815]  ? get_partial_node.isra.70+0x1fe/0x240
[11843.345887]  find_file_item+0x119/0x160 [reiser4]
[11843.345937]  reiser4_write_tail_noreserve+0x105/0x520 [reiser4]
[11843.345984]  ? reiser4_grab+0x54/0xd0 [reiser4]
[11843.346038]  ? write_unix_file+0x159/0x4d0 [reiser4]
[11843.346082]  write_unix_file+0x159/0x4d0 [reiser4]
[11843.346125]  ? reiser4_write_tail_noreserve+0x520/0x520 [reiser4]
[11843.346166]  reiser4_write_dispatch+0xf8/0x500 [reiser4]
[11843.346178]  ? __handle_mm_fault+0xf4a/0x1210
[11843.346192]  ? common_file_perm+0x4e/0x110
[11843.346206]  vfs_write+0xb0/0x190
[11843.346220]  ksys_write+0x52/0xc0
[11843.346233]  do_syscall_64+0x55/0x110
[11843.346247]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.346258] RIP: 0033:0x7f249d330970
[11843.346271] Code: Bad RIP value.
[11843.346281] RSP: 002b:00007ffeb47b9e78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[11843.346297] RAX: ffffffffffffffda RBX: 0000000000001b6a RCX: 00007f249d330970
[11843.346308] RDX: 0000000000001b6a RSI: 0000000003690c50 RDI: 0000000000000009
[11843.346320] RBP: 0000000003690c50 R08: 00007f249ebcbc80 R09: 00000000036103e0
[11843.346331] R10: 00007f249ebcbc80 R11: 0000000000000246 R12: 0000000000001b6a
[11843.346346] R13: 0000000000000001 R14: 00000000036103e0 R15: 0000000000001b6a
[11843.346358] INFO: task cc1:32390 blocked for more than 120 seconds.
[11843.346375]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.346394] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.346410] cc1             D    0 32390  32388 0x00000000
[11843.346426] Call Trace:
[11843.346438]  ? __schedule+0x3f5/0x880
[11843.346450]  schedule+0x32/0x80
[11843.346491]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.346503]  ? remove_wait_queue+0x60/0x60
[11843.346541]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.346591]  cbk_cache_search+0x10f/0x2e0 [reiser4]
[11843.346640]  reiser4_object_lookup+0xf2/0x160 [reiser4]
[11843.346684]  ? save_plugin_sd.part.5+0x3f/0xf0 [reiser4]
[11843.346731]  find_file_item+0x119/0x160 [reiser4]
[11843.346773]  reiser4_write_tail_noreserve+0x105/0x520 [reiser4]
[11843.346825]  ? reiser4_grab+0x54/0xd0 [reiser4]
[11843.346874]  ? write_unix_file+0x159/0x4d0 [reiser4]
[11843.346913]  write_unix_file+0x159/0x4d0 [reiser4]
[11843.346954]  ? reiser4_write_tail_noreserve+0x520/0x520 [reiser4]
[11843.346995]  reiser4_write_dispatch+0xf8/0x500 [reiser4]
[11843.347012]  ? __handle_mm_fault+0xf4a/0x1210
[11843.347025]  ? common_file_perm+0x4e/0x110
[11843.347039]  vfs_write+0xb0/0x190
[11843.347059]  ksys_write+0x52/0xc0
[11843.347072]  do_syscall_64+0x55/0x110
[11843.347087]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.347097] RIP: 0033:0x7ff69c981970
[11843.347110] Code: Bad RIP value.
[11843.347117] RSP: 002b:00007fffe1d14e58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[11843.347130] RAX: ffffffffffffffda RBX: 0000000000000789 RCX: 00007ff69c981970
[11843.347141] RDX: 0000000000000789 RSI: 0000000003358370 RDI: 0000000000000009
[11843.347149] RBP: 0000000003358370 R08: 00007ff69e21cc80 R09: 00000000032d83e0
[11843.347159] R10: 00007ff69e21cc80 R11: 0000000000000246 R12: 0000000000000789
[11843.347170] R13: 0000000000000001 R14: 00000000032d83e0 R15: 0000000000000789
[11843.347180] INFO: task Telegram:32485 blocked for more than 120 seconds.
[11843.347197]       Not tainted 4.20.0-1+reiser4.0.2-amd64 #1 Debian 4.20.10-1+reiser4.0.2
[11843.347213] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[11843.347228] Telegram        D    0 32485      1 0x00000000
[11843.347245] Call Trace:
[11843.347252]  ? __schedule+0x3f5/0x880
[11843.347259]  schedule+0x32/0x80
[11843.347294]  reiser4_go_to_sleep+0x5d/0x90 [reiser4]
[11843.347302]  ? remove_wait_queue+0x60/0x60
[11843.347339]  longterm_lock_znode+0x3d7/0x4f0 [reiser4]
[11843.347384]  traverse_tree+0x1fb/0xa60 [reiser4]
[11843.347396]  ? __follow_mount_rcu.isra.31+0x3c/0xf0
[11843.347437]  ? cbk_cache_search+0x6c/0x2e0 [reiser4]
[11843.347480]  reiser4_object_lookup+0x151/0x160 [reiser4]
[11843.347529]  find_file_item+0x119/0x160 [reiser4]
[11843.347570]  read_unix_file+0x2b6/0x4e0 [reiser4]
[11843.347613]  reiser4_read_dispatch+0x5f/0x140 [reiser4]
[11843.347624]  vfs_read+0x91/0x130
[11843.347634]  ksys_read+0x52/0xc0
[11843.347643]  do_syscall_64+0x55/0x110
[11843.347651]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11843.347658] RIP: 0033:0x7fb485823910
[11843.347666] Code: Bad RIP value.
[11843.347671] RSP: 002b:00007fffcc817e88 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[11843.347678] RAX: ffffffffffffffda RBX: 0000000007088ce0 RCX: 00007fb485823910
[11843.347682] RDX: 0000000000010000 RSI: 000000000708b070 RDI: 0000000000000005
[11843.347687] RBP: 0000000000000d68 R08: 0000000000000003 R09: 0000000000010010
[11843.347692] R10: 0000000000000210 R11: 0000000000000246 R12: 00007fb485ade440
[11843.347697] R13: 00007fb485add900 R14: 00007fffcc817f40 R15: 00007fb485add900
[11950.546369] reiser4: sda5: found disk format 4.0.2.
[11955.458029] reiser4: sda5: using Hybrid Transaction Model.




[Index of Archives]     [Linux File System Development]     [Linux BTRFS]     [Linux NFS]     [Linux Filesystems]     [Ext4 Filesystem]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Resources]

  Powered by Linux