Niltze Ed, After further probing, it seems that beginning with reiser4 -patched kernel series 4.15.xy, and up, the hang issue crept in, i.e., was introduced. Notwithstanding, I wanted to rule out the possibility that systemd interaction with the reiser4 patched kernel(s) was a factor. Accordingly, I ripped off a few relevant packages from devuan ascii (stable) for AMD 64 arch: /var/cache/apt/archives/cgmanager_0.36-2+devuan1_amd64.deb /var/cache/apt/archives/libcgmanager0_0.36-2+devuan1_amd64.deb /var/cache/apt/archives/libpolkit-agent-1-0_0.105-18+devuan2.11_amd64.deb /var/cache/apt/archives/libpolkit-backend-1-0_0.105-18+devuan2.11_all.deb /var/cache/apt/archives/libpolkit-backend-consolekit-1-0_0.105-18+devuan2.11_amd64.deb /var/cache/apt/archives/libpolkit-backend-elogind-1-0_0.105-18+devuan2.11_amd64.deb /var/cache/apt/archives/libpolkit-gobject-1-0_0.105-18+devuan2.11_all.deb /var/cache/apt/archives/libpolkit-gobject-consolekit-1-0_0.105-18+devuan2.11_amd64.deb /var/cache/apt/archives/libpolkit-gobject-elogind-1-0_0.105-18+devuan2.11_amd64.deb /var/cache/apt/archives/libudisks2-0_2.1.8-1+devuan2_amd64.deb /var/cache/apt/archives/policykit-1_0.105-18+devuan2.11_amd64.deb /var/cache/apt/archives/udisks2_2.1.8-1+devuan2_amd64.deb < https://linuxconfig.org/how-to-replace-systemd-with-sysv-init-on-debian-linux > A current reiser4 -enhanced kernel 4.17.12-1 was running in that test partition slice with a default Debian Gnome GUI. It had already hung in prior occasions. Upon the successful init replacement of systemd, I was left with only terminal interaction. I mounted a 1.3TB reiser4 partition, performed a few copy operations, used find to search for a few files, and then I proceeded to umount the 1.3TB reiser4 partition. mount process hung. I opened another terminal in the same instance( ctrl + alt +f2 ), logged in, and checked to see if the reiser4 partition had in effect been umounted: df -hT did not show the partition mounted; yet still in the other terminal the mount process was still hung. As root, I typed shutdown, it hung too. Opened another terminal ( ctrl + alt +f3 ), I was still able to login and, as root, executed a dmesg into a file, which output follows: [ 0.000000] Linux version 4.17.0-1+reiser4.0.2-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.17.12-1+reiser4.0.2 (2018-08-05) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.17.0-1+reiser4.0.2-amd64 root=/dev/sda5 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ace3efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17FC, BIOS F.1C 01/23/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x44fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0AD000000 mask FFF000000 uncachable [ 0.000000] 3 base 0AE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask E00000000 write-back [ 0.000000] 8 base 400000000 mask FC0000000 write-back [ 0.000000] 9 base 440000000 mask FF0000000 write-back [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)] [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x18123f000, 0x18123ffff] PGTABLE [ 0.000000] BRK [0x181240000, 0x181240fff] PGTABLE [ 0.000000] BRK [0x181241000, 0x181241fff] PGTABLE [ 0.000000] BRK [0x181242000, 0x181242fff] PGTABLE [ 0.000000] BRK [0x181243000, 0x181243fff] PGTABLE [ 0.000000] BRK [0x181244000, 0x181244fff] PGTABLE [ 0.000000] BRK [0x181245000, 0x181245fff] PGTABLE [ 0.000000] BRK [0x181246000, 0x181246fff] PGTABLE [ 0.000000] BRK [0x181247000, 0x181247fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x354bd000-0x36a55fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000ACFFE120 00008C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000ACFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 0x00000000ACFEB000 00DB7F (v01 HP INSYDE 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 0x00000000ACF6C000 000040 [ 0.000000] ACPI: FACS 0x00000000ACF6C000 000040 [ 0.000000] ACPI: ASF! 0x00000000ACFFD000 0000A5 (v32 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 0x00000000ACFFB000 000038 (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 0x00000000ACFFA000 00008C (v02 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 0x00000000ACFF9000 00003C (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 0x00000000ACFEA000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000ACFE9000 00051F (v01 HP INSYDE 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 0x00000000ACFE7000 000028 (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 0x00000000ACFE4000 000034 (v07 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000ACFE3000 00094E (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 0x00000000ACFE2000 000996 (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 0x00000000ACFE1000 0002DA (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 0x00000000ACFE0000 00035D (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x44fdef000-0x44fdf3fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000044fdfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ace3efff] [ 0.000000] node 0: [mem 0x00000000acfff000-0x00000000acffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000044fdfffff] [ 0.000000] Reserved but unavailable: 12836 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000044fdfffff] [ 0.000000] On node 0 totalpages: 4180956 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11001 pages used for memmap [ 0.000000] DMA32 zone: 704064 pages, LIFO batch:31 [ 0.000000] Normal zone: 54264 pages used for memmap [ 0.000000] Normal zone: 3472896 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xada00000-0xaf9fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xace3f000-0xacebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xacebf000-0xacfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xacfbf000-0xacffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x540 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s142360 r8192 d29672 u262144 [ 0.000000] pcpu-alloc: s142360 r8192 d29672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4115471 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.17.0-1+reiser4.0.2-amd64 root=/dev/sda5 ro quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16348588K/16723824K available (10252K kernel code, 1209K rwdata, 3224K rodata, 1552K init, 656K bss, 375236K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 30787 entries in 121 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180313 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2195.009 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3c808c6b, max_idle_ns: 440795221974 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.01 BogoMIPS (lpj=8780036) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.024000] AppArmor: AppArmor initialized [ 0.030100] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.031341] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.031399] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.031439] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.031674] CPU: Physical Processor ID: 0 [ 0.031675] CPU: Processor Core ID: 0 [ 0.031681] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.031682] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.031686] mce: CPU supports 9 MCE banks [ 0.031702] process: using mwait in idle threads [ 0.031705] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.031706] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.031707] Spectre V2 : Mitigation: Full generic retpoline [ 0.031708] Speculative Store Bypass: Vulnerable [ 0.031812] Freeing SMP alternatives memory: 24K [ 0.036076] TSC deadline timer enabled [ 0.036079] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.036175] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.036198] core: PEBS disabled due to CPU errata, please upgrade microcode [ 0.036202] ... version: 3 [ 0.036202] ... bit width: 48 [ 0.036203] ... generic registers: 4 [ 0.036204] ... value mask: 0000ffffffffffff [ 0.036204] ... max period: 00007fffffffffff [ 0.036205] ... fixed-purpose events: 3 [ 0.036206] ... event mask: 000000070000000f [ 0.036246] Hierarchical SRCU implementation. [ 0.037192] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.037209] smp: Bringing up secondary CPUs ... [ 0.037301] x86: Booting SMP configuration: [ 0.037302] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.052065] smp: Brought up 1 node, 8 CPUs [ 0.052065] smpboot: Max logical packages: 1 [ 0.052065] smpboot: Total of 8 processors activated (35120.14 BogoMIPS) [ 0.056594] devtmpfs: initialized [ 0.056594] x86/mm: Memory block size: 128MB [ 0.057446] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes) [ 0.057446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.057446] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.057446] pinctrl core: initialized pinctrl subsystem [ 0.057446] NET: Registered protocol family 16 [ 0.057446] audit: initializing netlink subsys (disabled) [ 0.057446] audit: type=2000 audit(1541361989.056:1): state=initialized audit_enabled=0 res=1 [ 0.057446] cpuidle: using governor ladder [ 0.057446] cpuidle: using governor menu [ 0.057446] Simple Boot Flag at 0x44 set to 0x1 [ 0.057446] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.057446] ACPI: bus type PCI registered [ 0.057446] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.057446] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.057446] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.057446] PCI: Using configuration type 1 for base access [ 0.057446] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.060055] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.060089] ACPI: Added _OSI(Module Device) [ 0.060090] ACPI: Added _OSI(Processor Device) [ 0.060091] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.060092] ACPI: Added _OSI(Processor Aggregator Device) [ 0.060093] ACPI: Added _OSI(Linux-Dell-Video) [ 0.064000] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.072041] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.072494] ACPI: Dynamic OEM Table Load: [ 0.072503] ACPI: SSDT 0xFFFF887C3D18B800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.072707] ACPI: Dynamic OEM Table Load: [ 0.072707] ACPI: SSDT 0xFFFF887C3D3AB000 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.072707] ACPI: Dynamic OEM Table Load: [ 0.072707] ACPI: SSDT 0xFFFF887C3CC53C00 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.073244] ACPI: EC: EC started [ 0.073245] ACPI: EC: interrupt blocked [ 0.073961] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC [ 0.073964] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.073965] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions [ 0.073966] ACPI: Interpreter enabled [ 0.073991] ACPI: (supports S0 S3 S4 S5) [ 0.073992] ACPI: Using IOAPIC for interrupt routing [ 0.074020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.074186] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.075836] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.085113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.085118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.085154] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.085622] PCI host bridge to bus 0000:00 [ 0.085625] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.085626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.085628] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.085630] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window] [ 0.085631] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.085641] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.085739] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.085751] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.085757] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.085761] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.085874] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.085901] pci 0000:00:16.0: reg 0x10: [mem 0xc6504000-0xc650400f 64bit] [ 0.085980] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.086073] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.086805] pci 0000:00:1a.0: reg 0x10: [mem 0xc650a000-0xc650a3ff] [ 0.088915] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.089006] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.089030] pci 0000:00:1b.0: reg 0x10: [mem 0xc6500000-0xc6503fff 64bit] [ 0.089112] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.089200] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.089290] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.089384] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.089472] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.089563] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.089650] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.089742] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.089831] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.089929] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.090640] pci 0000:00:1d.0: reg 0x10: [mem 0xc6509000-0xc65093ff] [ 0.092746] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.092836] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.093023] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.093043] pci 0000:00:1f.2: reg 0x10: [io 0x5098-0x509f] [ 0.093052] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf] [ 0.093060] pci 0000:00:1f.2: reg 0x18: [io 0x5090-0x5097] [ 0.093068] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb] [ 0.093076] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.093085] pci 0000:00:1f.2: reg 0x24: [mem 0xc6508000-0xc65087ff] [ 0.093129] pci 0000:00:1f.2: PME# supported from D3hot [ 0.093208] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.093228] pci 0000:00:1f.3: reg 0x10: [mem 0xc6506000-0xc65060ff 64bit] [ 0.093250] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.093416] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.093453] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.093488] pci 0000:01:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.093510] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.093631] pci 0000:01:00.0: supports D1 D2 [ 0.093632] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093760] pci 0000:00:1c.0: PCI bridge to [bus 01-06] [ 0.093765] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.093769] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 0.093775] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.093973] pci 0000:07:00.0: [8086:008b] type 00 class 0x028000 [ 0.094183] pci 0000:07:00.0: reg 0x10: [mem 0xc4500000-0xc4501fff 64bit] [ 0.094839] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.095164] pci 0000:00:1c.1: PCI bridge to [bus 07-0c] [ 0.095169] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.095173] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 0.095179] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.095256] pci 0000:0d:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.095296] pci 0000:0d:00.0: reg 0x10: [mem 0xc3501000-0xc3501fff] [ 0.095392] pci 0000:0d:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.095485] pci 0000:0d:00.0: supports D1 D2 [ 0.095487] pci 0000:0d:00.0: PME# supported from D1 D2 D3hot [ 0.095602] pci 0000:0d:00.1: [10ec:5209] type 00 class 0x080500 [ 0.095640] pci 0000:0d:00.1: reg 0x10: [mem 0xc3500000-0xc35000ff] [ 0.095834] pci 0000:0d:00.1: supports D1 D2 [ 0.095836] pci 0000:0d:00.1: PME# supported from D1 D2 D3hot [ 0.095973] pci 0000:00:1c.2: PCI bridge to [bus 0d-12] [ 0.095977] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.095981] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 0.095988] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.096139] pci 0000:13:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.096225] pci 0000:13:00.0: reg 0x10: [mem 0xc3400000-0xc3401fff 64bit] [ 0.096556] pci 0000:13:00.0: PME# supported from D0 D3hot D3cold [ 0.096770] pci 0000:00:1c.3: PCI bridge to [bus 13] [ 0.096777] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 0.097254] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.097312] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15) [ 0.097367] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15) [ 0.097420] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.097474] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.097529] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15) [ 0.097583] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.097637] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.098578] ACPI: EC: interrupt unblocked [ 0.098593] ACPI: EC: event unblocked [ 0.098601] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.098602] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events [ 0.098664] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.098664] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.098664] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.098664] vgaarb: loaded [ 0.098664] pps_core: LinuxPPS API ver. 1 registered [ 0.098664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.098664] PTP clock support registered [ 0.098664] EDAC MC: Ver: 3.0.0 [ 0.098664] PCI: Using ACPI for IRQ routing [ 0.107302] PCI: pci_cache_line_size set to 64 bytes [ 0.107460] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.107462] e820: reserve RAM buffer [mem 0xace3f000-0xafffffff] [ 0.107463] e820: reserve RAM buffer [mem 0xad000000-0xafffffff] [ 0.107464] e820: reserve RAM buffer [mem 0x44fe00000-0x44fffffff] [ 0.107564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.107564] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.109025] clocksource: Switched to clocksource tsc-early [ 0.118089] VFS: Disk quotas dquot_6.6.0 [ 0.118112] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.118230] AppArmor: AppArmor Filesystem Enabled [ 0.118251] pnp: PnP ACPI init [ 0.118423] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.118425] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.118427] system 00:00: [io 0x1010-0x1013] has been reserved [ 0.118431] system 00:00: [io 0xffff] has been reserved [ 0.118432] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.118434] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.118436] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.118438] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.118445] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.118472] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.118520] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.118524] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.118573] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.118616] pnp 00:04: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active) [ 0.118739] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.118741] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.118743] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.118745] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.118747] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.118749] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.118750] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.118753] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.118755] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.118756] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.118761] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.120302] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.120304] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved [ 0.120309] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.120324] pnp: PnP ACPI: found 7 devices [ 0.126183] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.126188] pci 0000:0d:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.126228] pci 0000:00:1c.0: PCI bridge to [bus 01-06] [ 0.126232] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.126238] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 0.126242] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.126249] pci 0000:00:1c.1: PCI bridge to [bus 07-0c] [ 0.126252] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.126257] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 0.126262] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.126272] pci 0000:0d:00.0: BAR 6: assigned [mem 0xc3510000-0xc351ffff pref] [ 0.126274] pci 0000:00:1c.2: PCI bridge to [bus 0d-12] [ 0.126277] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.126282] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 0.126287] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.126293] pci 0000:00:1c.3: PCI bridge to [bus 13] [ 0.126298] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 0.126309] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.126311] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.126312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.126314] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window] [ 0.126316] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.126317] pci_bus 0000:01: resource 1 [mem 0xc5500000-0xc64fffff] [ 0.126319] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.126321] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff] [ 0.126322] pci_bus 0000:07: resource 1 [mem 0xc4500000-0xc54fffff] [ 0.126324] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.126325] pci_bus 0000:0d: resource 0 [io 0x2000-0x2fff] [ 0.126327] pci_bus 0000:0d: resource 1 [mem 0xc3500000-0xc44fffff] [ 0.126328] pci_bus 0000:0d: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.126330] pci_bus 0000:13: resource 1 [mem 0xc3400000-0xc34fffff] [ 0.126414] NET: Registered protocol family 2 [ 0.126575] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.126638] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.126875] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.127005] TCP: Hash tables configured (established 131072 bind 65536) [ 0.127053] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.127110] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.127196] NET: Registered protocol family 1 [ 0.127210] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.148170] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6b0 took 20457 usecs [ 0.168158] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6b0 took 19497 usecs [ 0.180483] pci 0000:13:00.0: quirk_usb_early_handoff+0x0/0x6b0 took 11982 usecs [ 0.180488] PCI: CLS 64 bytes, default 64 [ 0.180531] Unpacking initramfs... [ 0.629228] Freeing initrd memory: 22116K [ 0.629242] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.629245] software IO TLB [mem 0xa8e3f000-0xace3f000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 0.629946] Initialise system trusted keyrings [ 0.630006] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.631326] zbud: loaded [ 0.631628] pstore: using deflate compression [ 1.054661] Key type asymmetric registered [ 1.054663] Asymmetric key parser 'x509' registered [ 1.054703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.054736] io scheduler noop registered [ 1.054737] io scheduler deadline registered [ 1.054781] io scheduler cfq registered (default) [ 1.054783] io scheduler mq-deadline registered [ 1.055377] intel_idle: MWAIT substates: 0x21120 [ 1.055378] intel_idle: v0.4.1 model 0x2A [ 1.055707] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.057980] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.058373] Linux agpgart interface v0.103 [ 1.058422] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx> [ 1.058422] AMD IOMMUv2 functionality not available on this system [ 1.058979] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.067945] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.067949] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.068066] mousedev: PS/2 mouse device common for all mice [ 1.068163] rtc_cmos 00:01: RTC can wake from S4 [ 1.068312] rtc_cmos 00:01: registered as rtc0 [ 1.068329] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.068341] intel_pstate: Intel P-state driver initializing [ 1.068663] ledtrig-cpu: registered to indicate activity on CPUs [ 1.069632] NET: Registered protocol family 10 [ 1.073354] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.079859] Segment Routing with IPv6 [ 1.079916] mip6: Mobile IPv6 [ 1.079921] NET: Registered protocol family 17 [ 1.079931] mpls_gso: MPLS GSO support [ 1.081789] microcode: sig=0x206a7, pf=0x10, revision=0x25 [ 1.082226] microcode: Microcode Update Driver: v2.2. [ 1.082260] sched_clock: Marking stable (1082197465, 0)->(1072220549, 9976916) [ 1.082857] registered taskstats version 1 [ 1.082859] Loading compiled-in X.509 certificates [ 1.132382] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 1.132788] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 1.132817] zswap: loaded using pool lzo/zbud [ 1.132969] AppArmor: AppArmor sha1 policy hashing enabled [ 1.133254] rtc_cmos 00:01: setting system clock to 2018-11-04 20:06:30 UTC (1541361990) [ 1.134970] Freeing unused kernel memory: 1552K [ 1.212113] Write protecting the kernel read-only data: 16384k [ 1.213559] Freeing unused kernel memory: 2024K [ 1.219574] Freeing unused kernel memory: 872K [ 1.232673] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.232674] x86/mm: Checking user space page tables [ 1.239145] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.322517] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.322529] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.323156] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), 08:2e:5f:7f:b8:a4, XID 0c900800 IRQ 24 [ 1.323159] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.327748] ACPI: bus type USB registered [ 1.327774] usbcore: registered new interface driver usbfs [ 1.327785] usbcore: registered new interface driver hub [ 1.327826] usbcore: registered new device driver usb [ 1.329523] SCSI subsystem initialized [ 1.329749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.330057] sdhci: Secure Digital Host Controller Interface driver [ 1.330058] sdhci: Copyright(c) Pierre Ossman [ 1.332626] ehci-pci: EHCI PCI platform driver [ 1.332646] cryptd: max_cpu_qlen set to 1000 [ 1.332804] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.332813] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.332829] ehci-pci 0000:00:1a.0: debug port 2 [ 1.333993] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.333994] ACPI: Thermal Zone [THRM] (44 C) [ 1.335494] sdhci-pci 0000:0d:00.1: SDHCI controller found [10ec:5209] (rev 1) [ 1.335720] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.335745] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 1.335749] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.336749] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.336822] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc650a000 [ 1.336897] mmc0: SDHCI controller on PCI [0000:0d:00.1] using DMA [ 1.337022] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.337375] libata version 3.00 loaded. [ 1.337413] AVX version of gcm_enc/dec engaged. [ 1.337414] AES CTR mode by8 optimization enabled [ 1.343922] r8169 0000:01:00.0 eno1: renamed from eth0 [ 1.352016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.352092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.352093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.352095] usb usb1: Product: EHCI Host Controller [ 1.352096] usb usb1: Manufacturer: Linux 4.17.0-1+reiser4.0.2-amd64 ehci_hcd [ 1.352097] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.352224] hub 1-0:1.0: USB hub found [ 1.352236] hub 1-0:1.0: 2 ports detected [ 1.352389] xhci_hcd 0000:13:00.0: xHCI Host Controller [ 1.352396] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 2 [ 1.352561] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.352571] xhci_hcd 0000:13:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 1.352948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.352950] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.352951] usb usb2: Product: xHCI Host Controller [ 1.352952] usb usb2: Manufacturer: Linux 4.17.0-1+reiser4.0.2-amd64 xhci-hcd [ 1.352954] usb usb2: SerialNumber: 0000:13:00.0 [ 1.353051] hub 2-0:1.0: USB hub found [ 1.353067] hub 2-0:1.0: 2 ports detected [ 1.353201] xhci_hcd 0000:13:00.0: xHCI Host Controller [ 1.353204] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 3 [ 1.353207] xhci_hcd 0000:13:00.0: Host supports USB 3.0 SuperSpeed [ 1.356000] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.356051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 [ 1.356052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.356053] usb usb3: Product: xHCI Host Controller [ 1.356055] usb usb3: Manufacturer: Linux 4.17.0-1+reiser4.0.2-amd64 xhci-hcd [ 1.356056] usb usb3: SerialNumber: 0000:13:00.0 [ 1.356212] hub 3-0:1.0: USB hub found [ 1.356255] hub 3-0:1.0: 2 ports detected [ 1.370439] ahci 0000:00:1f.2: version 3.0 [ 1.380860] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 1.380868] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.393575] scsi host0: ahci [ 1.394527] scsi host1: ahci [ 1.394926] scsi host2: ahci [ 1.395213] scsi host3: ahci [ 1.395417] scsi host4: ahci [ 1.395581] scsi host5: ahci [ 1.395688] ata1: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508100 irq 34 [ 1.395690] ata2: DUMMY [ 1.395692] ata3: DUMMY [ 1.395693] ata4: DUMMY [ 1.395694] ata5: DUMMY [ 1.395698] ata6: SATA max UDMA/133 abar m2048@0xc6508000 port 0xc6508380 irq 34 [ 1.396066] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.396082] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.396102] ehci-pci 0000:00:1d.0: debug port 2 [ 1.400030] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.400065] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc6509000 [ 1.416109] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.416226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 [ 1.416229] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.416232] usb usb4: Product: EHCI Host Controller [ 1.416235] usb usb4: Manufacturer: Linux 4.17.0-1+reiser4.0.2-amd64 ehci_hcd [ 1.416238] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.416671] hub 4-0:1.0: USB hub found [ 1.416694] hub 4-0:1.0: 2 ports detected [ 1.628118] tsc: Refined TSC clocksource calibration: 2195.013 MHz [ 1.628141] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns [ 1.628398] clocksource: Switched to clocksource tsc [ 1.688108] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.711636] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.711679] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.715776] ata6.00: ATAPI: hp CDDVDW SN-208BB, HH01, max UDMA/100 [ 1.722464] ata6.00: configured for UDMA/100 [ 1.752104] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.811168] ata1.00: ATA-10: ST2000LX001-1RG174, SDM1, max UDMA/133 [ 1.811176] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.844874] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.844881] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.845547] hub 1-1:1.0: USB hub found [ 1.845678] hub 1-1:1.0: 6 ports detected [ 1.899096] ata1.00: configured for UDMA/133 [ 1.908700] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.908707] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.908789] scsi 0:0:0:0: Direct-Access ATA ST2000LX001-1RG1 SDM1 PQ: 0 ANSI: 5 [ 1.909308] hub 4-1:1.0: USB hub found [ 1.909386] hub 4-1:1.0: 6 ports detected [ 1.916106] scsi 5:0:0:0: CD-ROM hp CDDVDW SN-208BB HH01 PQ: 0 ANSI: 5 [ 1.980396] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.980403] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.980422] sd 0:0:0:0: [sda] Write Protect is off [ 1.980427] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.980455] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.984436] sda: sda1 sda2 sda3 sda4 sda5 [ 1.985111] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.048050] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.048058] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.048356] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.108056] random: fast init done [ 2.196102] usb 4-1.2: new full-speed USB device number 3 using ehci-pci [ 2.218966] psmouse serio1: synaptics: queried max coordinates: x [..5756], y [..4868] [ 2.306727] usb 4-1.2: New USB device found, idVendor=062a, idProduct=4101, bcdDevice=81.13 [ 2.306735] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.306739] usb 4-1.2: Product: 2.4G Keyboard Mouse [ 2.306743] usb 4-1.2: Manufacturer: MOSART Semi. [ 2.307188] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 726294 [ 2.313807] hidraw: raw HID events driver (C) Jiri Kosina [ 2.319822] usbcore: registered new interface driver usbhid [ 2.319825] usbhid: USB HID core driver [ 2.321392] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:062A:4101.0001/input/input3 [ 2.365179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 2.380607] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1.2/input0 [ 2.381395] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/0003:062A:4101.0002/input/input4 [ 2.384102] usb 4-1.5: new full-speed USB device number 4 using ehci-pci [ 2.440902] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:1d.0-1.2/input1 [ 2.497128] usb 4-1.5: New USB device found, idVendor=8086, idProduct=0189, bcdDevice=69.19 [ 2.497136] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.533833] Loading Reiser4 (format release: 4.0.2) See www.namesys.com for a description of Reiser4. [ 2.568083] PM: Image not found (code -22) [ 2.605760] reiser4: sda5: found disk format 4.0.2. [ 2.957210] reiser4: sda5: using Hybrid Transaction Model. [ 5.431981] random: mktemp: uninitialized urandom read (6 bytes read) [ 5.433766] random: mktemp: uninitialized urandom read (6 bytes read) [ 5.529637] random: ckbcomp: uninitialized urandom read (4 bytes read) [ 6.304879] Adding 9765884k swap on /dev/sda3. Priority:-2 extents:1 across:9765884k FS [ 7.003278] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 7.030655] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 7.212788] random: dd: uninitialized urandom read (512 bytes read) [ 7.655658] random: cgmanager: uninitialized urandom read (12 bytes read) [ 8.910934] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 8.967613] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 9.031215] elogind[1730]: New seat seat0. [ 9.033467] random: avahi-daemon: uninitialized urandom read (4 bytes read) [ 9.245686] Bluetooth: Core ver 2.22 [ 9.245704] NET: Registered protocol family 31 [ 9.245705] Bluetooth: HCI device and connection manager initialized [ 9.245709] Bluetooth: HCI socket layer initialized [ 9.245713] Bluetooth: L2CAP socket layer initialized [ 9.245723] Bluetooth: SCO socket layer initialized [ 9.256648] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.256650] Bluetooth: BNEP filters: protocol multicast [ 9.256654] Bluetooth: BNEP socket layer initialized [ 10.464431] ipx: module is from the staging directory, the quality is unknown, you have been warned. [ 10.465894] NET: Registered protocol family 4 [ 10.473531] NET: Registered protocol family 3 [ 10.477711] NET: Registered protocol family 5 [ 16.123932] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 16.277557] r8169 0000:01:00.0 eno1: link down [ 16.277681] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 51.214239] random: crng init done [ 51.214247] random: 2 urandom warning(s) missed due to ratelimiting [ 54.120694] elogind[1730]: New session 1 of user chingon. [ 487.155193] reiser4: sda2: found disk format 4.0.2. [ 491.178208] reiser4: sda2: using Hybrid Transaction Model. [ 682.973148] elogind[1730]: New session 3 of user chingon. [ 1071.997863] elogind[1730]: Removed session 3. [ 1333.615180] elogind[1730]: New session 4 of user chingon. [ 2055.132223] INFO: task shutdown:3067 blocked for more than 120 seconds. [ 2055.132327] Tainted: G C 4.17.0-1+reiser4.0.2-amd64 #1 Debian 4.17.12-1+reiser4.0.2 [ 2055.132444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2055.132558] shutdown D 0 3067 3034 0x00000000 [ 2055.132565] Call Trace: [ 2055.132588] ? __schedule+0x3dc/0x860 [ 2055.132594] ? __schedule+0x3e4/0x860 [ 2055.132602] schedule+0x32/0x80 [ 2055.132608] rwsem_down_read_failed+0x136/0x1a0 [ 2055.132616] ? wb_wait_for_completion+0x7f/0x90 [ 2055.132623] ? default_file_splice_write+0x20/0x20 [ 2055.132628] ? call_rwsem_down_read_failed+0x14/0x30 [ 2055.132632] call_rwsem_down_read_failed+0x14/0x30 [ 2055.132638] down_read+0x1c/0x30 [ 2055.132647] iterate_supers+0x9c/0x100 [ 2055.132652] ksys_sync+0x40/0xb0 [ 2055.132657] __ia32_sys_sync+0xa/0x10 [ 2055.132664] do_syscall_64+0x55/0x110 [ 2055.132670] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2055.132676] RIP: 0033:0x7f64e5b675b7 [ 2055.132679] RSP: 002b:00007fff66ceb7a8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a2 [ 2055.132686] RAX: ffffffffffffffda RBX: 0000000000000036 RCX: 00007f64e5b675b7 [ 2055.132688] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00005606526b0ec4 [ 2055.132691] RBP: 0000000000000000 R08: 0000560653a88b50 R09: 0000000000000000 [ 2055.132694] R10: 000000000000081f R11: 0000000000000202 R12: 00007fff66cebc78 [ 2055.132697] R13: 00005606526b1000 R14: 0000000000000000 R15: 00007fff66cec911 [ 2175.964226] INFO: task shutdown:3067 blocked for more than 120 seconds. [ 2175.964328] Tainted: G C 4.17.0-1+reiser4.0.2-amd64 #1 Debian 4.17.12-1+reiser4.0.2 [ 2175.964445] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2175.964558] shutdown D 0 3067 3034 0x00000000 [ 2175.964566] Call Trace: [ 2175.964586] ? __schedule+0x3dc/0x860 [ 2175.964592] ? __schedule+0x3e4/0x860 [ 2175.964600] schedule+0x32/0x80 [ 2175.964606] rwsem_down_read_failed+0x136/0x1a0 [ 2175.964613] ? wb_wait_for_completion+0x7f/0x90 [ 2175.964620] ? default_file_splice_write+0x20/0x20 [ 2175.964625] ? call_rwsem_down_read_failed+0x14/0x30 [ 2175.964629] call_rwsem_down_read_failed+0x14/0x30 [ 2175.964634] down_read+0x1c/0x30 [ 2175.964642] iterate_supers+0x9c/0x100 [ 2175.964647] ksys_sync+0x40/0xb0 [ 2175.964652] __ia32_sys_sync+0xa/0x10 [ 2175.964659] do_syscall_64+0x55/0x110 [ 2175.964665] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2175.964671] RIP: 0033:0x7f64e5b675b7 [ 2175.964674] RSP: 002b:00007fff66ceb7a8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a2 [ 2175.964679] RAX: ffffffffffffffda RBX: 0000000000000036 RCX: 00007f64e5b675b7 [ 2175.964682] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00005606526b0ec4 [ 2175.964685] RBP: 0000000000000000 R08: 0000560653a88b50 R09: 0000000000000000 [ 2175.964688] R10: 000000000000081f R11: 0000000000000202 R12: 00007fff66cebc78 [ 2175.964691] R13: 00005606526b1000 R14: 0000000000000000 R15: 00007fff66cec911 [ 2256.724167] elogind[1730]: New session 5 of user chingon. [ 2296.796234] INFO: task shutdown:3067 blocked for more than 120 seconds. [ 2296.796357] Tainted: G C 4.17.0-1+reiser4.0.2-amd64 #1 Debian 4.17.12-1+reiser4.0.2 [ 2296.796474] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2296.796588] shutdown D 0 3067 3034 0x00000000 [ 2296.796595] Call Trace: [ 2296.796618] ? __schedule+0x3dc/0x860 [ 2296.796624] ? __schedule+0x3e4/0x860 [ 2296.796631] schedule+0x32/0x80 [ 2296.796637] rwsem_down_read_failed+0x136/0x1a0 [ 2296.796645] ? wb_wait_for_completion+0x7f/0x90 [ 2296.796652] ? default_file_splice_write+0x20/0x20 [ 2296.796657] ? call_rwsem_down_read_failed+0x14/0x30 [ 2296.796661] call_rwsem_down_read_failed+0x14/0x30 [ 2296.796666] down_read+0x1c/0x30 [ 2296.796675] iterate_supers+0x9c/0x100 [ 2296.796680] ksys_sync+0x40/0xb0 [ 2296.796685] __ia32_sys_sync+0xa/0x10 [ 2296.796692] do_syscall_64+0x55/0x110 [ 2296.796698] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2296.796705] RIP: 0033:0x7f64e5b675b7 [ 2296.796708] RSP: 002b:00007fff66ceb7a8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a2 [ 2296.796714] RAX: ffffffffffffffda RBX: 0000000000000036 RCX: 00007f64e5b675b7 [ 2296.796717] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00005606526b0ec4 [ 2296.796720] RBP: 0000000000000000 R08: 0000560653a88b50 R09: 0000000000000000 [ 2296.796723] R10: 000000000000081f R11: 0000000000000202 R12: 00007fff66cebc78 [ 2296.796726] R13: 00005606526b1000 R14: 0000000000000000 R15: 00007fff66cec911 [ 2334.516746] elogind[1730]: New session 6 of user chingon. Best Professional Regards.
