Hello, Any thoughts as to why command fails and how fix warnings ? volume [located on /dev/sdb] uses entire disk. Thanks for assistance --Glenn -tried # mount -o dont_load_bitmap /dev/sdb /media/disk mount: mount(2) failed: No such file or directory - mountpoint exists # ll /media/disk total 0 # fdisk -l Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes, 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes #dmesg shows: [disk plugged in and mount attempt] [ 28.904861] usb usb1-port3: disabled by hub (EMI?), re-enabling... [ 28.904880] usb 1-3: USB disconnect, device number 2 [ 29.187872] usb 1-3: new low-speed USB device number 3 using ohci-pci [ 29.356171] usb 1-3: New USB device found, idVendor=1c4f, idProduct=0034 [ 29.356183] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 29.356190] usb 1-3: Product: Usb Mouse [ 29.356196] usb 1-3: Manufacturer: SIGMACHIP [ 29.364090] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:1C4F:0034.0002/input/input21 [ 29.364627] hid-generic 0003:1C4F:0034.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:12.0-3/input0 [ 29.568181] usb 4-1: new high-speed USB device number 3 using ehci-pci [ 29.704239] usb 4-1: New USB device found, idVendor=04fc, idProduct=0c25 [ 29.704251] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 29.704257] usb 4-1: Product: USB to Serial-ATA bridge [ 29.704263] usb 4-1: Manufacturer: Sunplus Technology Inc. [ 29.704268] usb 4-1: SerialNumber: ST32000542 5XW1ZMG4 [ 29.723217] usb-storage 4-1:1.0: USB Mass Storage device detected [ 29.723584] scsi host4: usb-storage 4-1:1.0 [ 29.723801] usbcore: registered new interface driver usb-storage [ 30.726464] scsi 4:0:0:0: Direct-Access ST320005 42AS PQ: 0 ANSI: 2 [ 30.727079] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 30.729576] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 30.733952] sd 4:0:0:0: [sdb] Write Protect is off [ 30.733960] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 30.736912] sd 4:0:0:0: [sdb] No Caching mode page found [ 30.736920] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 40.300617] sd 4:0:0:0: [sdb] Attached SCSI disk . . [ 415.988119] Loading Reiser4 (format release: 4.0.1) See www.namesys.com for a description of Reiser4. [ 415.993678] reiser4[mount(1499)]: try_init_format40 (../fs/reiser4/plugin/disk_format/disk_format40.c:303)[vpf-1364]: NOTICE: Warning: mounting sdb with fatal errors, forcing read-only mount. [ 415.993703] reiser4: sdb: found disk format 4.0.1. [ 416.062105] reiser4[mount(1499)]: traverse_tree (../fs/reiser4/search.c:725)[nikita-373]: WARNING: not found on internal node: level: 6, lock_level: 1, stop_level: 1 lock_mode: read, bias: exact [ 416.062118] reiser4[mount(1499)]: key_warning (../fs/reiser4/plugin/file_plugin_common.c:510)[nikita-717]: WARNING: Error for inode 42 (-2) Got this previously: http://www.spinics.net/lists/reiserfs-devel/msg04596.html -- To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
