Re: Multipath I/O stats

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Not nessacarily. If you advertise one 10 disk LUN from the SAN, the OS  
will see it as one disk, and multipath can make multiple paths to the  
same "disk". That's 10 spindles in one disk, which, if they're fast or  
SSD, will saturate a fiber link.

Sent from my iPhone

On May 23, 2010, at 2:25 PM, "Yong Huang" <yong321@xxxxxxxxx> wrote:

> Robert,
>
> If I'm not mistaken, multipath is about multiple accesses to one
> single hard drive (or a virtual one on top of modern storage
> technology). That is, having more than one path does not mean
> using multiple spindles. It's still one single spindle.
>
> Yong Huang
>
> -----Original message-----
>
> If you stripe reads across enough spindles, you can saturate a fiber
> link. In most cases multipath is good for redundancy not throughout,
> but it can be used for better throughput if you can feed enough data.
>
> Also remember you can multipath with iSCSI and similar technologies
> benefit immensly from multipathing since the media throughput is  
> lower.
>
> Sorry for incoherence - recently woke up after a 23 hour work day.
>
>
> On May 22, 2010, at 12:59, "Yong Huang" <yong321@xxxxxxxxx> wrote:
>
>> While we're on this topic, here's some not very technical thought
>> on load balancing of multipath. When we talk about "load balance",
>> we always tend to associate it with overall performance improvement
>> (overall means scalability or throughput of multiple "clients", not
>> latency of a single "client"). For example, an Oracle cluster
>> database (called RAC by Oracle) allows more clients to connect to
>> the database without degraded response time. But here we're dealing
>> with multipath I/O. It's different in that the work done underneath
>> is on one single piece of storage hardware, a hard disk (or a
>> virtual one provided by some storage technology). Because read speed
>> on the storage itself is always much slower than any of the multi-
>> paths which is usually fiber channel, whether you have a single or
>> multiple paths to access the single slow disk will not provide
>> performance improvement. Am I missing anything obvious?
>>
>> No doubt multipath provides failover capability or failure
>> resilience. Even with that one advantage, it's worth it.
>>
>> Yong Huang
>
>
>
>
> -- 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list

-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux