I am not sure which scsi device you are searching for , but you should see an sda, sdb type number. So when querying for the wwid of the interal disk, use that descriptor. such as: scsi_id -g -u -s /block/sda (instead of /dev/cciss/c0d0) Show us an df -h output and we might understand the make up of your server a little better. You MUST use the wwid, not the sda, b, c number/letter these change depending on when they come up and are presented to the linux OS, you will corrupt your data writing to the wrong lun. This happens on reboot. Use the lun id and you'll never go wrong. trust me I have trashed many databases prior to learning this lesson Here is a helpful link; http://kbase.redhat.com/faq/docs/DOC-4042 ________________________________ From: Unix Administrator <earlysame55@xxxxxxxxx> To: Redhat list <redhat-list@xxxxxxxxxx> Sent: Tuesday, September 8, 2009 6:34:04 AM Subject: scsi_id good day folks, i need to blacklist my internal disk in the multipath.conf. How do i get the wwid for this. I have tried the following scsi_id -g -u -d /dev/cciss/c0d0 AND scsi_id -g -v -s /block/cciss\!c0d0 they return nothing am i doing it right is my question. cheers -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subjecthttps://www.redhat.com/mailman/listinfo/redhat-list
