Bill Tangren wrote:
-----Original Message-----
Some ideas:
Turn off firewalling if possible.
Check default route
# ip route list
10.212.166.0/24 dev eth0 proto kernel scope link src 10.212.166.26
169.254.0.0/16 dev eth0 scope link
default via 10.212.166.1 dev eth0 <----!!!!
correct if necessary.
Check for UDP connectivity
# nmap -PU -p53 DNS.SERVER.IP.ADDRESS
# traceroute -U DNS.SERVER.IP.ADDRESS
OK, this is what is produced on the server that works:
*****
[root@mach2 X11]# ip route list
169.254.0.0/16 dev eth0 scope link
10.0.0.0/8 dev eth0 proto kernel scope link src 10.1.5.58
default via 10.1.1.2 dev eth0
So mach2:eth0 has an IP of 10.1.5.58, right?
[root@mach2 ~]# nmap -PU -p53 10.1.1.6
Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2007-12-12 15:33
EST
Note: Host seems down. If it is really up, but blocking our ping probes,
try -P0
Nmap run completed -- 1 IP address (0 hosts up) scanned in 2.054 seconds
[root@mach2 ~]# nmap -PU -p53 10.1.1.46
Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2007-12-12 15:33
EST
Interesting ports on aurora.timenet.usno.navy.mil (10.1.1.46):
PORT STATE SERVICE
53/tcp open domain
MAC Address: 00:18:8B:38:28:97 (Unknown)
Nmap run completed -- 1 IP address (1 host up) scanned in 0.295 seconds
[root@mach2 ~]#
*****
The server that doesn't looks like this:
*****
[root@aa-cvs ~]# ip route list
169.254.0.0/16 dev eth0 scope link
10.0.0.0/8 dev eth0 proto kernel scope link src 10.1.5.58
default via 10.1.1.2 dev eth0
and aa-cvs:eth0 also has an IP address of 10.1.5.58, right?
See the problem yet? Same IP address on two nodes?
[root@aa-cvs ~]# nmap -PU -p53 10.1.1.6
Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2007-12-12 15:33
EST
Note: Host seems down. If it is really up, but blocking our ping probes,
try -P0
Nmap run completed -- 1 IP address (0 hosts up) scanned in 2.054 seconds
[root@aa-cvs ~]# nmap -PU -p53 10.1.1.46
Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2007-12-12 15:33
EST
Note: Host seems down. If it is really up, but blocking our ping probes,
try -P0
Nmap run completed -- 1 IP address (0 hosts up) scanned in 2.049 seconds
[root@aa-cvs ~]#
*****
The difference
If either works then check for an access list on your DNS. Usually in
named.conf
I am having this problem even if I change the name and IP number of the
broken server to the unbroken one. Same problem.
I have now reinstalled the OS on the broken server, and it STILL is having
problems. It has to be a hardware problem, but I can't figure out what it
could be.
Try a different switch port if possible.
I'll have to talk to the network guys about this.
--
Stephen Carville <scarville@xxxxxxxxxx>
--
Stephen Carville <scarville@xxxxxxxxxx>
Systems Engineer
Land America
1.626.667.1450 X1326
#####################################################################
Ad eundum quo nemo ante iit.
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
