Make sure that you have the latest update of FC6. I know with RHEL 4, we had to have update 4 or 5 to see the RAID set. Alfred Hovdestad, RHCE University of Saskatchewan Quoting dbrett@xxxxxxx: > Ok this is beyond my knowledge. I can look for the driver, but how do you > load the driver manually? > > david > > On Thu, 30 Aug 2007, Geoff Rainey wrote: > > > I have recently had the same problem with an Adaptec scsi raid > > controller > > (7901x) whereby the install would not detect the disks. Since this > > Adaptec > > Controller driver should have been available for this install, I had to > > select "linux noprobe" to forcibly load the driver manually which > > resolved > > my issue - though caused another issue resulting in a kernel recompile > > of a > > kernel.org kernel. > > > > These issues are generally resolved by the availability of a "driver > > disk" for > > A piece of hardware from the manufacturer's website, such as the HP site > > under > > support and drivers, if you're using HP gear. > > > > Regards, > > Geofrey. > > > > -----Original Message----- > > From: redhat-list-bounces@xxxxxxxxxx > > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of dbrett@xxxxxxx > > Sent: Thursday, 30 August 2007 9:11 a.m. > > To: General Red Hat Linux discussion list > > Subject: Re: Installing on scsi raid drives > > > > Unfortunately, It does not see the drive. It is a working drive because > > it has an older version of another Linux running on it. > > > > On Wed, 29 Aug 2007, Ali, Saqib wrote: > > > >> if it is a hardware RAID then you don't have to do anything. FC6 > >> should just see it as a single storage unit (Harddrive) > >> > >> I have few DL380 with hardware raid running FC6/RH4, and I didn't have > > > >> to do anything special. > >> > >> saqib > >> http://security-basics.blogspot.com/ > >> > >> > >> > >> > >> On 8/29/07, dbrett@xxxxxxx <dbrett@xxxxxxx> wrote: > >>> I am new to install FC6 on SCSI hardware RAID drives. > >>> > >>> I am trying to install FC6 on Compact DL380 with three discs in a > >>> RAID 5 configuration. When I try FC6 does not see the drive. What > >>> do I have to do for FC6 to see the hardware RAID disc? > >>> > >>> My search has come across anything useful. > >>> > >>> thanks > >>> david > >>> > >>> -- > >>> redhat-list mailing list > >>> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > >>> https://www.redhat.com/mailman/listinfo/redhat-list > >>> > >> > >> > >> -- > >> Saqib Ali, CISSP, ISSAP > >> http://www.full-disk-encryption.net > >> > >> -- > >> redhat-list mailing list > >> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > >> https://www.redhat.com/mailman/listinfo/redhat-list > >> > > > > -- > > redhat-list mailing list > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > > https://www.redhat.com/mailman/listinfo/redhat-list > > ========================================================== > > For more information on the Television New Zealand Group, visit us > > online at tvnz.co.nz > > ========================================================== > > CAUTION: This e-mail and any attachment(s) contain information that > > is intended to be read only by the named recipient(s). This information > > is not to be used or stored by any other person and/or organisation. > > > > -- > > redhat-list mailing list > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > > https://www.redhat.com/mailman/listinfo/redhat-list > > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
