So the actual device does get recognized okay then? If so, I have Nothing to add I'm sorry. -----Original Message----- From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Anthony Reynolds Sent: Monday, 23 July 2007 8:35 a.m. To: redhat-list@xxxxxxxxxx Subject: mt refuses to report location on the tape Dear All, This is a follow-on to a previous posting as we have encountered the exact same problem with RHEL ES4: We attached a Quantum 8000 DLT to an Adaptec 39320A SCSI controller - the tape drive works fine, tar works fine and most of the mt commands work fine except mt -f /dev/nst0 tell which comes back with "no such device". Everything works fine on an older RH Linux system. If anyone knows the solution to this problem on RHEL 4 we'd be very grateful. Kind regards Anthony Reynolds Image Diagnostic Technology Ltd London, England ==================================================== Date: Fri, 17 Jun 2005 11:24:14 -0500 To: redhat-list@xxxxxxxxxx I have a RHEL WS 4 Update 1 machine with a DLT drive attached. A user wants to use it, but is encountering some weird behavior from mt. The device shows up in dmesg, the module is loaded, and /dev/st0 and /dev/nst0 exist. tar -tvf will successfully list the contents of a tape in the drive. However, 'mt -f /dev/nst0 tell' fails with 'no such device'. Normally I would suspect that the tape drive doesn't have this capability, but this command worked just fine with the machine's former Redhat 7.2 install. mt's other functions, including rewind, etc. appear to be working fine. Any ideas? -Mindy ==================================================== -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list ========================================================== For more information on the Television New Zealand Group, visit us online at tvnz.co.nz ========================================================== CAUTION: This e-mail and any attachment(s) contain information that is intended to be read only by the named recipient(s). This information is not to be used or stored by any other person and/or organisation. -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
