I am currently having problems with a Redhat machine not booting after a DD image of another machine has been put on to it. We have 40 odd machines with all exactly the same spec and OS config and DD is used to image one machine incase of a disk failure. This image is kept on a network drive and then deployed when needed. I have checked to make sure the Raid settings on the machine are correct and they seem fine showing 2 x 36gig disks individually using raid 0. The error i get when i reboot the machine after the image has been deployed to it is below, it then prompt me for the root password to enter maintenance mode. Has anyone seen this error before or do you have any ideas where i can start to diagnose the problem. " Invalid Argument when trying to open /dev/md0" P.s The /dev/md0 device is used for our /local_scratch area which is around 60 gig in size. Any help would be much appreciated. Regards Andrew Bridgeman ********************************************************************** This transmission is confidential and must not be used or disclosed by anyone other than the intended recipient. Neither Corus Group Plc nor any of its subsidiaries can accept any responsibility for any use or misuse of the transmission by anyone. For address and company registration details of certain entities within the Corus group of companies, please visit http://www.corusgroup.com/entities ********************************************************************** -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list