Here is the result of the script:
[root@mail ~]# ./scan_scsi_bus.sh
Host adapter 0 (aic7xxx) found.
Host adapter 1 (aic7xxx) found.
0 new device(s) found.
0 device(s) removed.
David Tonhofer wrote:
Dana Holland wrote:
This is what's showing in /proc/scsi/scsi - the device with Id: 06
used to say Seagate DAT-72, so I've obviously changed something in my
attempts to fix this.
You mean to say that there is no entry?
Try scanning the SCSI bus with this little script (just run it as
scan_scsi_bush.sh)
#!/bin/bash
# Skript to rescan SCSI bus, using the
# scsi add-single-device mechanism
# (w) 98/03/19 Kurt Garloff <kurt@xxxxxxxxxx> (c) GNU GPL
# Return hosts. /proc/scsi/HOSTADAPTER/? must exist
findhosts ()
{
hosts=
for name in /proc/scsi/*/?; do
name=${name#/proc/scsi/}
if test ! $name = scsi
then hosts="$hosts ${name#*/}"
echo "Host adapter ${name#*/} (${name%/*}) found."
fi
done
}
# Test if SCSI device $host $channen $id $lun exists
# Outputs description from /proc/scsi/scsi, returns new
testexist ()
{
grepstr="scsi$host Channel: 0$channel Id: 0*$id Lun: 0$lun"
new=`cat /proc/scsi/scsi|grep -e"$grepstr"`
if test ! -z "$new"
then cat /proc/scsi/scsi|grep -e"$grepstr"
cat /proc/scsi/scsi|grep -A2 -e"$grepstr"|tail -2|pr -o4 -l1
fi
}
# Perform search (scan $host)
dosearch ()
{
for channel in $channelsearch; do
for id in $idsearch; do
for lun in $lunsearch; do
new=
devnr="$host $channel $id $lun"
echo "Scanning for device $devnr ..."
printf "OLD: "
testexist
if test ! -z "$remove" -a ! -z "$new"
then echo "scsi remove-single-device $devnr" >/proc/scsi/scsi
echo "scsi add-single-device $devnr" >/proc/scsi/scsi
printf "\r\x1b[A\x1b[A\x1b[AOLD: "
testexist
if test -z "$new"; then printf "\rDEL: \r\n\n\n\n"; let
rmvd+=1; fi
fi
if test -z "$new"
then printf "\rNEW: "
echo "scsi add-single-device $devnr" >/proc/scsi/scsi
testexist
if test -z "$new"; then printf "\r\x1b[A"; else let found+=1; fi
fi
done
done
done
}
# main
if test @$1 = @--help -o @$1 = @-h
then
echo "Usage: scan_scsi_bus.sh [-l] [-w] [-c] [host [host ...]]"
echo " -l activates scanning for LUNs 0 .. 7 [default: 0]"
echo " -w enables scanning for device IDs 0 .. 15 [def.: 0 .. 7]"
echo " -r enables removing of devices [default: disabled]"
echo " -c enables scanning of channels 0 1 [default: 0]"
echo " If hosts are given, only these are scanned [default: all]"
exit 0
fi
# defaults
lunsearch="0"
idsearch="0 1 2 3 4 5 6 7"
channelsearch="0"
remove=""
# Scan options
opt="$1"
while test ! -z "$opt" -a -z "${opt##-*}"; do
opt=${opt#-}
case "$opt" in
l) lunsearch="0 1 2 3 4 5 6 7" ;;
w) idsearch="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15" ;;
c) channelsearch="0 1" ;;
r) remove=1 ;;
*) echo "Unknown option -$opt !" ;;
esac
shift
opt="$1"
done
# Hosts given ?
if test @$1 = @; then findhosts; else hosts=$*; fi
declare -i found=0
declare -i rmvd=0
for host in $hosts; do dosearch; done
echo "$found new device(s) found. "
echo "$rmvd device(s) removed. "
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
