Just for fun, have you added 'no_timer_check' to the kernel boot parameters? I've had to do that on all 64bit systems I have. Syed Johnullah wrote: > I did set the time in BIOS and on OS also time zone configured > correctly. > I don't have problem in other servers in which 32 bit RHEL 4 ES > installed, > Two DL380 G4 servers which is Extended 64 bit has RHEL 4 ES 64 bit > installed. > > Both the servers have same problem. > > Regards > Syed Johnullah > > > -----Original Message----- > From: Meadows, Andrew [mailto:AMeadows@xxxxxxx] > Sent: Wednesday, December 20, 2006 5:56 PM > To: redhat-list@xxxxxxxxxx > Subject: Re: Clock skew problem - RHEL 4 AS > > If you can shutdown the server for a few moments you are golden. Just > shut down and set the time in the bios. Also make sure on the os side > that you have the time zone set correctly..... > > -----Original Message----- > From: redhat-list-bounces@xxxxxxxxxx <redhat-list-bounces@xxxxxxxxxx> > To: redhat-list@xxxxxxxxxx <redhat-list@xxxxxxxxxx> > Sent: Wed Dec 20 07:24:36 2006 > Subject: Clock skew problem - RHEL 4 AS > > I have installed Redhat Enterprise 4 AS 64 bit OS in HP Proliant DL 380 > G4 server, > > > > System clock doesn't syncronize with NTP server, even I tried to > configure the date and time manually but > > > > no use. I figured out that system clock frequency is too high to be > syncronized with NTP. > > > > What I shall I do to solve this issue? > > > > > > Regards > > Syed Johnullah > > > > > -- Ita erat quando hic adveni. Mark Haney Sr. Systems Administrator ERC Broadband (828) 350-2415 -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
