You can also use the "nameif" command to rename your interfaces. Goes something like this nameif <what_you_want_to_call_the_interface> <mac_address_of_interface_you_want_to_name> If in doubt, read the (sparse) man page. Cheers, Mike. -----Original Message----- From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list-bounces@xxxxxxxxxx]On Behalf Of Jim Canfield Sent: Thursday, October 19, 2006 2:25 PM To: General Red Hat Linux discussion list Subject: Re: New NICs coming up as devXXXX not ethX Just went through this myself. Ironically also on a dell server. After trying several variations of things this works consistently: 1.Remove the New NIC 2. Reboot let kudzu detect the removal and delete configutation 3. Reinstall the NIC 4. Let kudzu recognize the NIC and Setup when prompted. The setup script will assign proper ethX device names. Josh Miller wrote: > I have had this problem with Dell servers and I had to disable the > on-board NICs via the BIOS to get the proper ethX assignments. > > - Josh, RHCE > > Shane Presley wrote: >> I have a Dell 2850 RHEL4, which had two onboard NICs (eth0 and eth1). >> >> I added a new Intel dual GB PCI-X card, and for some reason the new >> interfaces came up as dev23379 and dev16239. They work fine, but I'm >> not sure why they wouldn't come up as eht2 and eth3. Any way I can >> control that? >> >> Thanks, >> Shane >> > -- Jim Canfield, CISSP Tulsa Spine and Specialty Hospital 918-388-2331 -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
