Hi Michael,
for a quick-test, that the interface works, you can use "minicom".
Start this programm ... it's quite simple to use.
BTW: tty4 sounds for me a little "unusual"... perhaps ttyS4 is what
you need?
If all fails, take a look at
http://www.vanemery.com/Linux/Serial/serial-console.html
cu,
Joe
Michael Schwartz wrote:
Hi -
I have an application that runs under Redhat 7.2 that expects to see a
serial port at /dev/tty4 with characteristics 9600,N,1,1. Through my own
ignorance or perhaps through failure of the PCI serial card (Dolphin 2-port
PCI card) the application doesn't appear to notice the serial port. I know
very little about linux and how to turn this back on or test to see of the
port has failed. Does anyone have a way (or can VNC to my computer) to see
what's going on? Many thanks in advance.
Michael
Tenagra Observatories
--
Dipl.-Ing. Jörg Ventker, RHCE joe@xxxxxxxxxxxxxxxxx
Schlösserweg 26 D-48282 Emsdetten (+49)(0)170-44 900 14
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
