Hi
First check your disk free space with
df -h ---> disk free and
df -i ----> Inode free
Secondly clean the "/tmp" directory
thirdly go into the runnlevel 3 and
move the configuration file "/etc/X11/xorg.conf" to some file "Make sure the
file is moved not copied"
then issue the command "system-config-display"
after issuing the command you should see the X window and a dialog box for
configuring your display
when you click "finish" it will return to the command prompt
now enter into the runlevel 5 -------- You will get the display correctly
On 26/09/06, Rian <rian.castillo@xxxxxxxxx> wrote:
Monitor is an ADI Provista model, but specifying it as Generic Monitor
worked fine
Video Card is an Sis mode, but specifying it as Generic VESA worked fine
Keyboard is a K627 Genius model (PS/2)
Mouse is an A4Tech OK-720 model (PS/2)
Here's the Xorg.conf
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of
the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customize the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbMode1" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "XAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor 800x600"
HorizSync 31.5 - 35.1
VertRefresh 50.0 - 61.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videcard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "VESA driver (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "640x400"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "640x400"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
On 9/25/06, Vladimir Kosovac <vkosovac@xxxxxxxxx> wrote:
>
> Yes, I did omit config from the command, sorry.
> Can you copy/paste contents of the xorg.conf?
> What hardware (vga, monitor, mouse, kbd) do you have?
>
> V
>
> On 9/26/06, Rian <rian.castillo@xxxxxxxxx> wrote:
> >
> > I tried executing Xorg with no parameters & Xorg with the -config
> > /etc/X11/xorg.conf both resulted in a blank black screen with an X
mouse
> > pointer, nothing was displayed from then on.
> >
> > On 9/25/06, Vladimir Kosovac <vkosovac@xxxxxxxxx> wrote:
> > >
> > > What happens if you run
> > >
> > > Xorg -</path/to/xorg.conf>
> > >
> > > V
> > >
> > > On 9/26/06, Rian <rian.castillo@xxxxxxxxx> wrote:
> > > >
> > > > After running the sytem-config-display (same with the one I was
> > > mentioning
> > > > awhile back), the program created a conf file @ /etc/X11, but when
I
> > try
> > > > to
> > > > start X Windows, it still looks for the conf file at these
locations
> > > (see
> > > > below) and not in /etc/X11. I even tried copying
/etc/X11/xorg.conf
> to
> > > the
> > > > said directories all to no avail. What seems to be the problem?
> > > >
> > > > //XF86Config
> > > > /etc/XF86Config
> > > > /usr/X11R6/lib/XF86Config.PortalServer01.in.svi.ph
> > > > /usr/X11R6/lib/XF86Config
> > > >
> > > > On 9/25/06, Vladimir Kosovac <vkosovac@xxxxxxxxx> wrote:
> > > > >
> > > > > Your config file should be /etc/X11/xorg.conf
> > > > >
> > > > > On RHEL4 you need to run `system-config-display` - usually sorts
> > > > > everything.
> > > > > If that fails, run:
> > > > >
> > > > > Xorg -configure
> > > > >
> > > > > and follow instructions.
> > > > >
> > > > > V
> > > > >
> > > > > On 9/26/06, Rian <rian.castillo@xxxxxxxxx> wrote:
> > > > > >
> > > > > > Dear All,
> > > > > >
> > > > > > I'm using RHEL 4 ES, power tripped a while back and when Linux
> > > starts
> > > > up
> > > > > > it
> > > > > > shows this error:
> > > > > >
> > > > > > I cannot start the X server <
http://www.linuxforums.org/forum/#>
> > > (your
> > > > > > graphical interface). It is likely that it is not set up
> > correctly.
> > > > > would
> > > > > > you like to view the X server output to diagnose the problem?
> > (Y/N)
> > > > > >
> > > > > > I then tried running the configuration program and this is
what
> it
> > > > found
> > > > > > out:
> > > > > >
> > > > > > Could not find config file
> > > > > > tried
> > > > > > //XF86Config
> > > > > > /etc/XF86Config
> > > > > > /usr/X11R6/lib/XF86Config.PortalServer01.in.svi.ph
> > > > > > /usr/X11R6/lib/XF86Config
> > > > > >
> > > > > > The configuration program then finished but the error still
> > > persists..
> > > > > Can
> > > > > > anyone help?
> > > > > > --
> > > > > > redhat-list mailing list
> > > > > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx
> > > ?subject=unsubscribe
> > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > >
> > > > > --
> > > > > redhat-list mailing list
> > > > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx
> > ?subject=unsubscribe
> > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > >
> > > > --
> > > > redhat-list mailing list
> > > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx
> ?subject=unsubscribe
> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx
?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
Thanks and Regards
------------------------------
N S Vikram,
Asso. IT Engr.
CMC LTD,
Chennai.
Mobile : 09444357170
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
