In /etc/sysconfig/network-scripts
you will see the scripts for starting your network interfaces, ifcfg-eth*
in ifcfg-eth1 the line ONBOOT should be set to no, so it won't start on a
reboot (or rather when networking is restarted).
Then take the interface down with ifdown eth1
John
On Mon, 10 Apr 2006, Padiyath Sreekumaran wrote:
Hello,
I have 2 NICs in my RedHat OS 3 server. I have configured one and
using only 1 for the
time being. How can I disable the second(I donot want to remove it)
with a SW command(ifdown eth1?)
ifconfig -a output:
-----------------------
cipsec0 Link encap:Ethernet HWaddr 00:0B:FC:F8:01:8F
NOARP MTU:1356 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:F0:91:2C:E5:B6
inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx
Mask:255.255.255.0
inet6 addr: bc80::2e0:71ff:fe2b:e3f0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:59188871 errors:0 dropped:0 overruns:0 frame:0
TX packets:127812924 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4921604534 (4.5 GiB) TX bytes:191591664439 (178.4
GiB)
Interrupt:11
Thanks in advance.
Regards,
Kumar
------------------------------------------------------------------
Padiyath Sreekumar | Tel: +41.56.310.3643
Paul Scherrer Institut | email: kumar.padiyath@xxxxxx
AIT | Office: WHGA/U132
WHGA/U132 | Fax: +41.56.310.3649
CH-5232 Villigen PSI |
Switzerland |
-----------------------------------------------------------------
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
