> -----Original Message----- > From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list- > bounces@xxxxxxxxxx] On Behalf Of Bliss, Aaron > Sent: Monday, April 03, 2006 9:31 AM > To: General Red Hat Linux discussion list > Subject: Problems with connecting redhat 3 ES server to eva > > I'm having some problems with connecting redhat 3 ES server to eva; Any > ideas? > When attempting to fdisk /dev/sda; fidsk reports Unable to read /dev/sda > The following shows up after unloading and re-loading the device driver: What host type is the linux host configured as on the EVA (check in command view under hosts) ? Which version of the Controller software are you running ? (check hardware - rack 1 - controller enclosure - controller a or b in command view) It is listed as software version. Run hp_rescan on the host and send the output. How many vdisks are presented to the host, what are their assigned luns ? What does dmesg |grep sd return ? I have a hunch but would like to confirm it with the data above. -Tobias > > /var/log/messsages after loading the qla driver: > Apr 3 12:22:51 ms-lnx-s20 kernel: Attached scsi generic sg0 at scsi0, > channel 0, id 0, lun 0, type 12 > Apr 3 12:22:51 ms-lnx-s20 kernel: Attached scsi disk sda at scsi0, > channel 0, id 0, lun 1 > Apr 3 12:22:51 ms-lnx-s20 kernel: resize_dma_pool: unknown device type > 12 > Apr 3 12:22:51 ms-lnx-s20 kernel: SCSI device sda: 293601280 512-byte > hdwr sectors (150324 MB) > Apr 3 12:22:51 ms-lnx-s20 kernel: sda:<6>Device 08:00 not ready. > Apr 3 12:22:51 ms-lnx-s20 kernel: I/O error: dev 08:00, sector 0 > Apr 3 12:22:51 ms-lnx-s20 kernel: Device 08:00 not ready. > Apr 3 12:22:51 ms-lnx-s20 kernel: I/O error: dev 08:00, sector 0 > Apr 3 12:22:51 ms-lnx-s20 kernel: unable to read partition table > Apr 3 12:23:11 ms-lnx-s20 kernel: Device 08:00 not ready. > Apr 3 12:23:11 ms-lnx-s20 kernel: I/O error: dev 08:00, sector 0 > > The folowing shows up in /proc/scsi/qla2300/0 > /proc/scsi/qla2300/0: > QLogic PCI to Fibre Channel Host Adapter for QLA2340 : > Firmware version: 3.03.11, Driver version 7.05.00p8 > Entry address = f8843060 > HBA: QLA2312 , Serial# S02722 > Request Queue = 0x37710000, Response Queue = 0x1b0e0000 > Request Queue count= 512, Response Queue count= 512 > Total number of active commands = 0 > Total number of interrupts = 8 > Total number of IOCBs (used/max) = (0/600) > Total number of queued commands = 0 > Device queue depth = 0x20 > Number of free request entries = 500 > Number of mailbox timeouts = 0 > Number of ISP aborts = 0 > Number of loop resyncs = 0 > Number of retries for empty slots = 0 > Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0 > Host adapter:loop state= <READY>, flags= 0x860813 > Dpc flags = 0x0 > MBX flags = 0x0 > SRB Free Count = 4096 > Link down Timeout = 008 > Port down retry = 030 > Login retry count = 030 > Commands retried with dropped frame(s) = 0 > Configured characteristic impedence: 50 ohms > Configured data rate: 1-2 Gb/sec auto-negotiate > > > SCSI Device Information: > scsi-qla0-adapter-node=200000e08b1be281; > scsi-qla0-adapter-port=210000e08b1be281; > scsi-qla0-target-0=50001fe150047c68; > > SCSI LUN Information: > (Id:Lun) * - indicates lun is not registered with the OS. > ( 0: 0): Total reqs 1, Pending reqs 0, flags 0x0, 0:0:81, > ( 0: 1): Total reqs 7, Pending reqs 0, flags 0x0, 0:0:81, > > www.preferredcare.org > "An Outstanding Member Experience," Preferred Care HMO Plans -- J. D. > Power and Associates > > Confidentiality Notice: > The information contained in this electronic message is intended for the > exclusive use of the individual or entity named above and may contain > privileged or confidential information. If the reader of this message is > not the intended recipient or the employee or agent responsible to deliver > it to the intended recipient, you are hereby notified that dissemination, > distribution or copying of this information is prohibited. If you have > received this communication in error, please notify the sender immediately > by telephone and destroy the copies you received. > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
