RE: Problem with sdlt drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Per the instructions below, I figured out that the box is attempting to
use the following driver

0x1000  0x0030  "mptscsih"      "LSI Logic / Symbios Logic|53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI"

When I run insmod mptscsih; I get kernel errors

unresolved symbol mpt_print_ioc_summary_R39d6a9a4

Any ideas? 

-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Bliss, Aaron
Sent: Thursday, March 16, 2006 1:07 PM
To: Magnus Andersen; General Red Hat Linux discussion list
Subject: RE: Problem with sdlt drive

Yep, I tried that, no dice; what is the best way to figure out what
driver the tape device is trying to use? 

Here is a list of loaded modules
lsmod | more
Module                  Size  Used by    Not tainted
e1000                  96284   0  (unused)
e100                   28264   1
mii                     4516   0  [e100]
floppy                 56624   0  (autoclean)
ipt_limit               1528  23  (autoclean)
ipt_state               1080  25  (autoclean)
ipt_LOG                 4184  23
ip_conntrack_ftp        5264   0  (unused)
iptable_mangle          2776   0  (autoclean) (unused)
iptable_nat            21584   0  (autoclean) (unused)
ip_conntrack           27176   3  (autoclean) [ipt_state
ip_conntrack_ftp iptabl
e_nat]
iptable_filter          2412   1  (autoclean)
ip_tables              15904   8  [ipt_limit ipt_state ipt_LOG
iptable_mangle ip
table_nat iptable_filter]
microcode               5688   0  (autoclean)
ext3                   85864   6
jbd                    50956   6  [ext3]
sg                     36204   0
qla2300               592156   1
qla2300_conf          301592   0
cpqarray               23652   6
sd_mod                 13968   2
scsi_mod              107180   2  [sg qla2300 sd_mod]

Thanks.

Aaron 

-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Magnus Andersen
Sent: Thursday, March 16, 2006 12:46 PM
To: General Red Hat Linux discussion list
Subject: Re: Problem with sdlt drive

I've had issues with similar results on my HP DL servers.  If the tape
drive was using the cciss driver I ended up putting a line like this in
my rc.local to make sure it loaded correctly.

echo "engage scsi" > /proc/dirver/cciss/cciss0

HTH,

--
Magnus Andersen
Systems Administrator / Oracle DBA
Walker & Associates, Inc.
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=subscribe
https://www.redhat.com/mailman/listinfo/redhat-list


www.preferredcare.org
"An Outstanding Member Experience," Preferred Care HMO Plans -- J. D.
Power and Associates

Confidentiality Notice:
The information contained in this electronic message is intended for the
exclusive use of the individual or entity named above and may contain
privileged or confidential information.  If the reader of this message
is not the intended recipient or the employee or agent responsible to
deliver it to the intended recipient, you are hereby notified that
dissemination, distribution or copying of this information is
prohibited.  If you have received this communication in error, please
notify the sender immediately by telephone and destroy the copies you
received.


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list


-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux