Anything dealing with SAN architecture we run AS. This is mainly because everything we have connected to the SAN is either currently, or slated to be, a high availability machine. AS provides us with Premium 24x7 support which is required for our applications. Why are you using the engenio drivers for Qlogic 2340's? We use Qlogic and HP's drivers, both of which support native card level failover and multipathing. Qlogic's are on their website, HP's are in the driver downloads section, relabeled as model FCA2214. Make sure you get the drivers relevant to your architecture. If you decide to use the Qlogic/HP Drivers, and need further assistance, feel free to contact, I spent a good many months on development of Linux/SAN architectures, and have learned quite a bit, any help I can provide is yours. Thanks, Tom Callahan TESSCO Technologies Desk: (410)-229-1361 Cell: (443)-506-6216 Email: callahant@xxxxxxxxxx A real engineer only resorts to documentation when the keyboard dents on the forehead get too noticeable. bob flynn wrote: >Is anyone using the following configuration. > >RH Enterprise 3/4 >2 * Qlogic 2340 with engenio driver in failover mode >Storagetek Diskarray > >Basically I am having lockup problems, where writing to the diskarray is >locking up. I have checked via santricity and >the diskarray is fine, ie it is not showing any errors or failing over. >When I do a fdisk -l, the output hangs when it queries the >diskarray. > >Finally, engenio as saying I need to be running AS before they will >investigate further ( I am running WS ). If I knew what RH Enterprise OS >version others were sucessfully running it would be useful in terms of >confirming that my configuration should work. There is no reason to run >AS on this box other than this issue as far as I understand it. > >Thanks, > >-Bob > > >The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). >Please direct any additional queries to: communications@xxxxxxxxxxxx >Thank You. > > > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
