-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, define your gateway in /etc/sysconfig/network and reduce your ifcfg-eth0 like this; DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.0.255 IPADDR=192.168.0.10 NETMASK=255.255.255.0 NETWORK=192.168.0.0 ONBOOT=yes TYPE=Ethernet On Mon, 5 Dec 2005 13:03:24 -0500 Devon Harding <devonharding@xxxxxxxxx> wrote: > For some reason, this doesn't seem to work on FC4. When I run > system-config-network and configure Ethernet or when I edit my > /etc/sysconfig/network-scripts/ifcfg-eth0 file, the IP address doesn't come > up on boot, just the interface. > > /etc/sysconfig/network-scripts/ifcfg-eth0 > # Please read /usr/share/doc/initscripts-*/sysconfig.txt > # for the documentation of these parameters. > USERCTL=no > PEERDNS=yes > IPV6INIT=no > GATEWAY=10.10.11.252 > TYPE=Ethernet > NETMAST=255.255.255.0 > IPADDR=10.10.11.70 > DEVICE=eth0 > ONBOOT=yes - -- Regards Ali Erdinç Köroglu http://www.prosoft.com.tr -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFDlIIOl+k9K746qXcRAoL0AJ9N3SHP9ZBlJJBGgfAEBbDChfM8XwCgjNqJ J51FJbUVxnyDwxr2QTFNtvQ= =kmpk -----END PGP SIGNATURE----- -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
