Hi Nilesh,
Thanks for the reply. Find attached the /var/log/boot.log & dmesg.
Regards,
-GnanaShekar-
On 11/30/05, nilesh vaghela <nileshj.vaghela@xxxxxxxxx> wrote:
>
> Can you paste your log file
> or you can examine
> from /var/log/messages
> command dmesg
> and if possible boot.log
>
> Nilesh
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subjectunsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
Linux version 2.6.9-22.EL (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 17:54:55 EDT 2005
EFI v1.10 by HP: SALsystab=0x3fe88000 ACPI 2.0=0x3fce2000 SMBIOS=0x3fe8a000 HCDP=0x3fce0000
booting generic kernel on platform hpzx1
ACPI: RSDP (v002 HP ) @ 0x000000003fce2000
ACPI: XSDT (v001 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fce202c
ACPI: FADT (v003 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fcf28b0
ACPI: SPCR (v001 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fcf29e8
ACPI: DBGP (v001 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fcf2a38
ACPI: MADT (v001 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fcf2bf0
ACPI: SPMI (v004 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fcf2a70
ACPI: CPEP (v001 HP rx4640 0x00000000 HP 0x00000000) @ 0x000000003fcf2ac0
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fceae00
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fceaf90
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcebee0
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fced090
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcef230
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcf13d0
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcf2580
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcf2640
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcf2710
ACPI: SSDT (v001 HP rx4640 0x00000006 INTL 0x02012044) @ 0x000000003fcf27e0
ACPI: DSDT (v001 HP rx4640 0x00000007 INTL 0x02012044) @ 0x0000000000000000
Warning: acpi_table_parse(ACPI_SRAT) returned 0!
Warning: acpi_table_parse(ACPI_SLIT) returned 0!
efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
efi.trim_top: ignoring 636KB of memory at 0x1000 due to granule hole at 0x0
efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule hole at 0x0
Initial ramdisk at: 0xe0000040fee06000 (1669098 bytes)
SAL 3.1: HP version 3.15
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
ACPI: Local APIC address c0000000fee00000
GSI 20 (level, low) -> CPU 0 (0x0000) vector 48
4 CPUs available, 4 CPUs total
PCDP: v0 at 0xe00000003fce0000
MCA related initialization done
Virtual mem_map starts at 0xa0007fffc7200000
On node 0 totalpages: 521753
DMA zone: 521753 pages, LIFO batch:4
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=scsi2:EFI\redhat\vmlinuz-2.6.9-22.EL rhgb quiet root=LABEL=/ ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
CPU 0: base freq=199.963MHz, ITC ratio=16/2, ITC freq=1599.711MHz+/-800ppm
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
Memory: 8299776k/8348048k available (5611k code, 60224k reserved, 2260k data, 384k init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 2392.40 BogoMIPS (lpj=1167360)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
Boot processor id 0x0/0x0
task migration cache decay timeout: 10 msecs.
CPU 1: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 654 cycles)
CPU 1: base freq=199.963MHz, ITC ratio=16/2, ITC freq=1599.711MHz+/-800ppm
Calibrating delay loop... 2392.40 BogoMIPS (lpj=1167360)
CPU 2: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 654 cycles)
CPU 2: base freq=199.963MHz, ITC ratio=16/2, ITC freq=1599.711MHz+/-800ppm
Calibrating delay loop... 2392.40 BogoMIPS (lpj=1167360)
CPU 3: synchronized ITC with CPU 0 (last diff -29 cycles, maxerr 716 cycles)
CPU 3: base freq=199.963MHz, ITC ratio=16/2, ITC freq=1599.711MHz+/-800ppm
Calibrating delay loop... 2392.40 BogoMIPS (lpj=1167360)
Brought up 4 CPUs
Total of 4 processors activated (9568.60 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 1616kB freed
NET: Registered protocol family 16
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (00:20)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (00:40)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT]
ACPI: PCI Root Bridge [PCI4] (00:80)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
ACPI: PCI Root Bridge [PCI5] (00:a0)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI5._PRT]
ACPI: PCI Root Bridge [PCI6] (00:c0)
ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 49
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 16 (level, low) -> IRQ 49
GSI 17 (level, low) -> CPU 1 (0x0100) vector 50
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 17 (level, low) -> IRQ 50
GSI 18 (level, low) -> CPU 2 (0x0200) vector 51
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 18 (level, low) -> IRQ 51
GSI 23 (level, low) -> CPU 3 (0x0300) vector 52
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 23 (level, low) -> IRQ 52
GSI 21 (level, low) -> CPU 0 (0x0000) vector 53
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 21 (level, low) -> IRQ 53
GSI 22 (level, low) -> CPU 1 (0x0100) vector 54
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, low) -> IRQ 54
GSI 31 (level, low) -> CPU 2 (0x0200) vector 55
ACPI: PCI interrupt 0000:20:02.0[A] -> GSI 31 (level, low) -> IRQ 55
GSI 32 (level, low) -> CPU 3 (0x0300) vector 56
ACPI: PCI interrupt 0000:20:02.1[B] -> GSI 32 (level, low) -> IRQ 56
GSI 27 (level, low) -> CPU 0 (0x0000) vector 57
ACPI: PCI interrupt 0000:21:04.0[A] -> GSI 27 (level, low) -> IRQ 57
IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1133259643.583:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 453B8631FE6159D3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Thermal Zone [THM0] (27 C)
EFI Time Services Driver v0.4
Linux agpgart interface v0.100 (c) Dave Jones
i8042.c: No controller found.
Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 49
ttyS0 at MMIO 0x84054000 (irq = 49) is a 16550A
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 16 (level, low) -> IRQ 49
ttyS1 at MMIO 0x84053000 (irq = 49) is a 16550A
ttyS2 at MMIO 0x84053010 (irq = 49) is a 16550A
ttyS3 at MMIO 0x84053038 (irq = 49) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD649: IDE controller at PCI slot 0000:00:03.0
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 21 (level, low) -> IRQ 53
CMD649: chipset revision 2
CMD649: 100% native mode on irq 53
ide0: BM-DMA at 0x0e00-0x0e07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0e08-0x0e0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: DV-28E-C, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0xe18-0xe1f,0xe26 on irq 53
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP: routing cache hash table of 131072 buckets, 2048Kbytes
TCP: Hash tables configured (established 4194304 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 384kB freed
SCSI subsystem initialized
HP CISS Driver (v 2.6.8)
cciss: Device 0x46 has been found at bus 33 dev 4 func 0
ACPI: PCI interrupt 0000:21:04.0[A] -> GSI 27 (level, low) -> IRQ 57
cciss: using DAC cycles
blocks= 143363040 block_size= 512
heads= 255, sectors= 32, cylinders= 17569
blocks= 143363040 block_size= 512
heads= 255, sectors= 32, cylinders= 17569
cciss/c0d0: p1 p2 p3 p4
cciss/c0d1: p1 p2 p3 p4 < p5 >
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:20:02.0[A] -> GSI 31 (level, low) -> IRQ 55
divert: allocating divert_blk for eth0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:20:02.1[B] -> GSI 32 (level, low) -> IRQ 56
ip_tables: (C) 2000-2002 Netfilter core team
divert: allocating divert_blk for eth1
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
pciehp: acpi_pciehprm:\_SB_.SBA0.PCI0 _ADR fail=0x5
pciehp: acpi_pciehprm:\_SB_.SBA0.PCI1 _ADR fail=0x5
ip_tables: (C) 2000-2002 Netfilter core team
pciehp: acpi_pciehprm:\_SB_.SBA0.PCI2 _ADR fail=0x5
pciehp: acpi_pciehprm:\_SB_.SBA0.PCI4 _ADR fail=0x5
pciehp: acpi_pciehprm:\_SB_.SBA0.PCI5 _ADR fail=0x5
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
pciehp: acpi_pciehprm:\_SB_.SBA0.PCI6 _ADR fail=0x5
pciehp: Both _OSC and OSHP methods do not exist
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 23 (level, low) -> IRQ 52
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: irq 52, pci mem c000000084050000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 17 (level, low) -> IRQ 50
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: irq 50, pci mem c000000084052000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 18 (level, low) -> IRQ 51
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: irq 51, pci mem c000000084051000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
usb 2-1: new low speed USB device using address 2
input: USB HID v1.00 Mouse [04b3:310b] on usb-0000:00:02.0-1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 3-1: new full speed USB device using address 2
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
usb 3-1.1: new full speed USB device using address 3
input: USB HID v1.10 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:02.1-1.1
NET: Registered protocol family 10
Disabled Privacy Extensions on device a000000100751b08(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
drivers/usb/input/hid-input.c: event field not found
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
eth0: no IPv6 routers present
EXT3 FS on cciss/c0d1p2, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on cciss/c0d1p5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 8008368k swap on /dev/cciss/c0d1p3. Priority:-1 extents:1
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
lp: driver loaded but no devices found
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
