I checked the system logs on my server, eth0 is 1000mbps full duplex, according to ethtool, it is 1000mbps full duplex, and according to mii-tool, eth0 is 100mbs. According to mii-tool, bond0 is 10mb half duplex. I am thinking that mii-tool is buggy. eth-tool does not work with bonded ethernets. The logs entries for bond0 only list the enslaved ports, no mention of speed. Matt On Wed, 2005-11-09 at 11:51, Raj Atwal wrote: > I have eth0 and eth1 bonded. When I check the duplex and speed settings on eth0 and eth1 using ethtool they show me that I have 1000 full duplex. > > If I use mii-tool to check the bond0 settings it shows me the following > > # mii-tool bond0 > bond0: 10 Mbit, half duplex, link ok > > Now I don't have any network speed problems on this box so I not really concerned but I just wanted to check if this is normal. I know that mii-tool is obsolete and is replaced by ethtool so this may just be a mii-tool blip. > > Thanks > > > > --------------------------------- > Yahoo! FareChase - Search multiple travel sites in one click. -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
