That is what I was looking for. Hopefully the 2.6 version works the same. I will find out as soon the HBA and tape drive get hooked up. Thanks: Jack Allen -----Original Message----- From: Dege, Robert C. [mailto:robert.dege@xxxxxxx] Sent: Wednesday, September 21, 2005 6:57 PM To: General Red Hat Linux discussion list Subject: RE: Tape drive support again I use the Adaptec 39160 on one of my file servers. The aic7xxx.ko does support it. I am using the 2.4 kernel on my server, although I don't think that'll make a difference for the 2.6 series. Excerpt from dmesg: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 3960D Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 3960D Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Excerpt from lspci: 01:00.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) Subsystem: Adaptec AHA-3960D U160/m Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 7 BIST result: 00 I/O ports at d400 [disabled] [size=256] Memory at ff8fe000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff8a0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 01:00.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) Subsystem: Adaptec AHA-3960D U160/m Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10 BIST result: 00 I/O ports at d800 [disabled] [size=256] Memory at ff8ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff8c0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 -Rob > -----Original Message----- > From: redhat-list-bounces@xxxxxxxxxx > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Allen, Jack > Sent: Wednesday, September 21, 2005 6:47 PM > To: 'Redhat-list@xxxxxxxxxx' > Subject: Tape drive support again > > We are installing a Dell 6850 and loading RH AS 4. > Dell is telling use we need an Adaptec 39160 HBA to connect > the tape drive to. > Doing "strings aic7xxx.ko | grep 160" show 29160 and 19160 > but no 39160. > My question is which driver supports this HBA? > > Thanks: > Jack Allen > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
