My understanding is 1 gig is auto negoitiate only, you cannot fix the speed. Regards thing -----Original Message----- From: inode0 [mailto:inode0@xxxxxxxxx] Sent: Tuesday, 28 June 2005 2:05 p.m. To: General Red Hat Linux discussion list Subject: Re: Mii-tool discrepincy On 6/27/05, Smith, Albert <Albert.Smith@xxxxxxxxxxxxxxxxx> wrote: > Hey folks, > > I just want to make sure that I am not the only one having this > problem. > > net-tools-1.60-20E.7 > > mii-tool is detecting the card at 100FD but ethtool is seeing the card > at 1gig. DMESG shows the link set to 1gig. If I have mii-tool > autonegotiate the card again it says that it's 100FD but dmesg states > 1gig and ethtool states 1gig. Does mii-tool support 1gig? Don't know for sure but the mii-tool manpage and help suggest that it doesn't. usage: mii-tool [-VvRrwl] [-A media,... | -F media] [interface ...] -V, --version display version information -v, --verbose more verbose output -R, --reset reset MII to poweron state -r, --restart restart autonegotiation -w, --watch monitor for link status changes -l, --log with -w, write events to syslog -A, --advertise=media,... advertise only specified media -F, --force=media force specified media technology media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD, (to advertise both HD and FD) 100baseTx, 10baseT So I'm guessing mii-tool is 10/100. John -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
