It looks like your box can see the LUNs and they're mapped to /dev/sdb and /dev/sdc. Can you manually mount /dev/sdc1 and /dev/sdb1 once the machine is booted? -Steve On Mon, 2005-05-23 at 10:01 -0500, Dana Holland wrote: > Rigler, Stephen C. wrote: > > I'm assuming the last 2 entries in /proc/scsi/scsi are your IBM array? > > Does /var/log/dmesg give you any clues as to what /dev/sd* entries they > > would be mapped to (you should see things like "Attached scsi disk sda > > at scsi0, channel 0, id 0, lun 0")? > > > > Yeah, here's what that file has: > > qla2x00_detect num_hosts=1 > scsi-qla0-adapter-port=210000e08b1b54dc\; > scsi-qla0-tgt-0-di-0-node=200400a0b8110d14\; > scsi-qla0-tgt-0-di-0-port=200500a0b8110d15\; > scsi-qla0-tgt-0-di-0-control=00\; > scsi-qla0-tgt-0-di-0-preferred=ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\; > scsi-qla1-adapter-port=210000e08b1b4b8a\; > scsi-qla1-tgt-0-di-1-node=200400a0b8110d14\; > scsi-qla1-tgt-0-di-1-port=200400a0b8110d15\; > scsi-qla1-tgt-0-di-1-control=80\; > scsi1 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 9 device 4 > irq 82 > Firmware version: 3.03.06, Driver version 7.03.00-fo > > scsi2 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 10 device > 3 irq 77 > Firmware version: 3.03.06, Driver version 7.03.00-fo > > blk: queue f630b018, I/O limit 4095Mb (mask 0xffffffff) > Vendor: IBM Model: 3542 Rev: 0520 > Type: Direct-Access ANSI SCSI revision: 03 > blk: queue f602be18, I/O limit 4095Mb (mask 0xffffffff) > Vendor: IBM Model: 3542 Rev: 0520 > Type: Direct-Access ANSI SCSI revision: 03 > blk: queue f602bc18, I/O limit 4095Mb (mask 0xffffffff) > scsi(1:0:0:0): Enabled tagged queuing, queue depth 32. > scsi(1:0:0:1): Enabled tagged queuing, queue depth 32. > blk: queue f602bc18, I/O limit 4095Mb (mask 0xffffffff) > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 > Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1 > SCSI device sdb: 285212672 512-byte hdwr sectors (146029 MB) > sdb: sdb1 > SCSI device sdc: 288118784 512-byte hdwr sectors (147517 MB) > sdc: sdc1 > > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
