On Wed, 2005-01-12 at 11:05, Otto Haliburton wrote: > > -----Original Message----- > > From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list- > > bounces@xxxxxxxxxx] On Behalf Of Blair Lowe > > Sent: Wednesday, January 12, 2005 11:57 AM > > To: General Red Hat Linux discussion list > > Subject: RE: Compiling kernel rpm > > > > On Tue, 2005-01-11 at 18:46, Otto Haliburton wrote: > > > > -----Original Message----- > > > > From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list- > > > > bounces@xxxxxxxxxx] On Behalf Of Blair Lowe > > > > Sent: Tuesday, January 11, 2005 2:49 PM > > > > To: Red Hat General List > > > > Subject: Compiling kernel rpm > > > > > > > > Hi, > > > > > > > > When I try to compile an rpm (rpmbuild -ba) for kernel-2.4.20-28.7 for > > > > rh7.3, the rpm doesn't create the smp. > > > > > > > > Here is the patch that I want to apply to upgrade the 3ware drivers > > > > (from code off of the 3ware website) in case someone at redhat wants > > to > > > > upgrade the valhalla kernel with this stuff: > > > > > > > > SPEC FILE (watch for my revision suffix there): > > > > http://www.computerengineering.ca/download/specs/kernel-2.4.spec > > > > > > > > 3ware PATCH (note patch level in spec file above): > > > > http://www.computerengineering.ca/download/patches/3ware-7.7.1-driver- > > > > update.patch > > > > > > > > Please advise as to how to create the smp kernel. Do I need smp arch > > on > > > > the machine that compiles the kernel to get an smp kernel? > > > > > > > > Thanks, > > > > Blair. > > > > > > > If you know how to build the kernel, then when you do menuconfig, or th > > > xconfig, you need to config the smp processor stuff, unless I'm confused > > by > > > what you are asking. I don't think you are going to get any other > > support > > > for what you want except you. > > > > Thanks Otto, > > > > Perhaps I should rephrase this for others: > > 1. I never expected anything from redhat, only requested it. I assumed > > that people other than redhat staff read and reply to this list. > > 2. All I want to know, is that why when I create the kernel from an RPM, > > it does not create the smp version. > > 3. How can I make the rpmbuild create a kernel using the kernel source > > with an smp version. > > -- > respectfully, I just told you, use the configuration programs to configure > for smp!!!!!!!!!!!!!!! Thanks Otto. The idea was that I would create the kernel with rpmbuild, menuconfig, however I shall see if I can go info the config SOURCE files, and do it that way with a patch or something. Blair. -- -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
