I've installed RH 9.0 on the Dimension 4700 with an external raid cabinet (SATA Drives dont work to well). I have solved the network issue without much effort, but I'm having an issue with the USB that is kind of peculiar. If I hook in the USB Multitech, it may or may not be detected. If I hook into another port, it usually is detected. Given the following scenario: USB Port 1 = A USB Port 2 = B USB Port 3 = C Plug Multitech into A initally, get good link, acm.o loads. Reseat the cable on the modem, and now only get power light. Reseat the USB Cable into A and only get power light, no drivers. Take out of A and plug into B and it gets detected, acm.o loads. Take out of B and plug into C, get power light, no drivers. Take out of C and put into A and we have acm.o load. Take from A and plug into B (which worked 5 mins ago) and we only get power. Take out of B and plug into C (which did not work a min ago) and now we got full functionality. You cannot however go from A (works) to A (only power) to A and make it work, still have only power, but as soon as I plug into another port, it works. So with that scenario, anybody have an idea? Wesley -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
