On Monday 13 September 2004 23:25, menonrr@xxxxxxxxxxxx wrote: > Hello, > > The mailing list friends helped me to enable IP forwarding on my Redhat 9 > gateway with the rule: > > "iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to-source 172.16.3.10" > > This rule forwards the traffic from the internal network (172.16.4.0/24) to > the outside. Not precisely - it actually does source NAT, changing the source address in the header of all outgoing packets to 172.16.3.10 (providing that they are leaving your machine via the eth1 interface). IP forwarding depends on the contents of /proc/sys/net/ipv4/ip_forward 1 is on , 0 is off to make this a permanent setting, you would edit /etc/sysctl.conf. (which should already contain a line to do this). > Problem: > > But I feel that the internal IPs are being forwarded with the IP address of > the external NIC of the gateway. > > It would be helpful if I could have a way to keep the internal IP address > (172.16.4.0)as it is without being substituted with the gateways IP > address(172.16.3.10). This is because I want the external users to see the > internal machines(172.16.4.0 network) as it is. I take it the external machines can route to this internal network - ie they have a route set to it via your RH9 gateway? Stuart -- Stuart Sears RHCE, RHCX -- You can't learn too soon that the most useful thing about a principle is that it can always be sacrificed to expediency. -- W. Somerset Maugham, "The Circle" -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
