Brian: By http, I take it to mean you went with IPP printing, not LPD. Do most print servers support that mode? Only some of them work with the standard JetDirect (port 9100) mode. What do you use for the printer and queue name in the configuration? Mike -----Original Message----- From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Brian D. McGrew Sent: Tuesday, August 31, 2004 4:33 PM To: General Red Hat Linux discussion list Subject: Re: Print server problems on Enterprise 3 I had a similar problem in a network with several linux and several windows servers where the printer would repeat the jobs over and over again. I was using a linksys print server. I finally ended up having to setup CUPS up to talk to the print server in http and the problem went away. Was very bizarre. -brian Brian D. McGrew { brian@xxxxxxxxxxxxxxxxxxx || pacemakertaker@xxxxxxxxx } -- > YOU! Off my planet! On Aug 31, 2004, at 4:29 PM, Michael Scully wrote: > Greetings fellow RH veterans: > > I have one client with a problem I haven't encountered anywhere else > on Red Hat. They have Enterprise 3.0 ES running at their main > location with > ssh sessions running our accounting package. At a remote site we have > another LAN that's using a VPN tunnel between sites to give them > access. At > that remote site, I have an HP Laser connected via a D-link print > server. > The printer is configured in CUPS as an LPD printer and works fine for > the > most part. > > Every so often, a print job gets "stuck" where it prints, but the > job remains in the queue and prints again (and again and again). The > users > finally have to turn the printer off before it goes through a ream of > paper. > If we reset the print server and printer, and clean out the print > queue, all > returns to normal for a day or two. > > I've watched this with lpstat to know that it's not some abnormal > job. It just doesn't get deleted in the queue, as if the hardware was > telling CUPS to re-submit the job instead of deleting it. I've used a > different brand of print server but with no difference. Also, the > connection between the print server and printer is USB, but that > shouldn't > matter to CUPS. It only sees the device as a host name and printer. > > Anyone else have similar experiences? I'm positive that there isn't > any PCL code for multiple copies in the print job itself. > > Mike Scully > > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
