We are in the process of configuring an EMC array on an RHEL ES 3 machine and are seeing disappointing performance especially when considering a comparison to what we see from RH9. The benchmarking tool we're using is Iozone (64K record size with a 4G file). The HBA's are QLogic 2300's (2gig). On RHEL 3, we're using LVM to stripe across two luns and the write rate is about 79MB/s, and read is about 110MB/s. Without striping, the write rate drops to about 45MB/s. With RH9, writing to a single lun (no striping), the write performance was about 160MB/s and read was about 100MB/s. We haven't tried striping across luns with RH9 (yet). This has been confirmed at two sites, so I'm curious if anyone else has seen this or has any tuning suggestions. Thanks, Steve RHCE #803003335409754 -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
