I have pmfirewall (www.pointman.org) running on my RH 7.0 server/LAN Router on a home office setup. It is a simple but effective ipchains firewall script. I need to use my WinXP desktop on the inside of the home firewall to communicate with my office WinXP, which is inside a firewalled router on a Win2K LAN. The home side outernet IP is 66.93.153.62, innernet IP 192.168.1.2. The office side outernet IP is 64.232.168.34, the innernet IP is 192.168.1.103. I didn't see in the script a place that closes off the RDP port 3389 specifically, so I added the following two rules at the end of the script. $IPCHAINS -A input -p tcp -s 64.232.168.34 --source-port 3389 -d 192.168.1.2 --destination-port 3389 -j ACCEPT I've also tried combinations of ports 0:65535, 3389 and there is no difference. The logs show that the firewall is denying a return of bits from the 64.232.168.34 IP on port 65535. I am contacting the remote network, but it is blocked on my end from returning any packets. When I run ipchains from the prompt, I see that port 3389 is open to 64.232.168.34, I don't seem to see anything that appears to deny it afterwards. Frank -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
